RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: aditup2004 on January 01, 2006, 03:58 PM
-
Are Araya Aero rims, in silver, anodized or laquered in some way? I am trying to polish a set and am only acheiving the desired mirror finish on the sidewalls where the brake has rubbed. You can see a diference in material between the "rubbed"area, and the middle which has not been rubbed. I know caustic removes anno, but does it attack the alloy? Help needed! Ad.
-
Not being funny bud, but are they shinesides ? If they are you can guess the rest :santa_afro:
-
No Guy, Araya Aero's do not have a sidewall as such, it is one continuous surface from side to side. If you know what I mean? Ad
-
caustic them mate i just stripped a set of hard anno pro class rims, removed all anno now ready to polish :santa_afro:if that does not work they may be laquered then you will need our old friend nitromores good luck
-
So they are anno'd with some clear protection stuff then?
You can see what I mean in the pic, matbe?;
(http://www.radbmx.co.uk/archive/albums/y43/aditup2004/DSCF1302.jpg)
Ad
-
ad i had the clear anno on a set of forks a couple of mins in caustic sorted it :santa_afro:
-
Looks like caustic then. Thats a 1st for me :santa_shocked: Ad :santa_afro:
-
let us know how you get on p.s dont forget your rubber gloves i also find rubbing rim with a scotch bright helps to remove any left overs good luck
-
let us know how you get on p.s dont forget your rubber gloves i also find rubbing rim with a scotch bright helps to remove any left overs good luck
Kinky, but intriguing. I'm strangeless curious now :o
-
just your dirty mind guy :santa_grin: all innocent honest :santa_wink:
-
careful you dont lose your watch up there dude :D
-
anno itself is not coloured, its dyed aftrewards. caustic will eat through alloy so be carefull.
-
:santa_afro:
I won't leave em in for too long then.
Do I have to submerge them or just coat em with the stuff? Ad :-\
-
yup they are annodised as are most alloy bmx parts to keep them shiney :)
-
hey ad youre keeping quiet about rims did you leave them to long and disolve them :2funny:
-
Been a bit busy with work, and then the brakes failed on my van, so just got a bit overwhelmed. Gonna give it a go this weekend I think. :santa_afro: Ad
-
I've got a set in alloy that need some attention as well. Might give mine a go at the weekend also. Does anybody know where you can get the little Araya stickers though.
-
Rims polished and built up. The pic does not do them justice. They have come up really well. Didn't take too long either, about an hour per rim (on a polishing wheel, not by hand) the result;
(http://www.radbmx.co.uk/archive/albums/y43/aditup2004/DSCF1313.jpg)
Ad :daumenhoch:
-
beautiful . mine now please.
-
Nice job Ad! :)
-
Nice blow job Ad! :)
perv!