RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: holwuff on September 15, 2008, 12:20 AM

Title: fitting of 3 piece crank
Post by: holwuff on September 15, 2008, 12:20 AM

hi guys

im about to fit my 1st 3 piece crank set (Redline twin-pinch flight cranks) and though it looks pretty straight forward i thought id post up here for any do's and dont's, any handy hints etc?  :daumenhoch:

Title: Re: fitting of 3 piece crank
Post by: MartyC on September 15, 2008, 05:26 AM

Hints and tips.... take your time, use a rubber mallet, put the axle washer in before you put the second bearing into the frame, don't overtighten the pinch bolts as they break real easy  :daumenhoch:.