RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: d14vd_h on January 31, 2006, 01:07 AM

Title: need a number plate insert, to allow use of decals, any ideas?
Post by: d14vd_h on January 31, 2006, 01:07 AM

hi guys go my original, NOS team raleigh aero plate through today, but it has mesh for clip on numbers
i was thinking of fabricating a piece of clear plastic to fit in in front of the mesh to alloy me to apply decals such as the oakley rub ons i got from wolfy.
any ideas of a cheap material to use and where from,
just need a bit of clear plastic as thin as possible and about the size of a4 paper thats relatively easy to cut with a jigsaw.
cheers
dave.

Title: Re: need a number plate insert, to allow use of decals, any ideas?
Post by: sawzall on January 31, 2006, 09:14 AM

try a model shop or an art n craft shop ,or you could have numbers laminated in large sheet then cut to size :daumenhoch:

Title: Re: need a number plate insert, to allow use of decals, any ideas?
Post by: ORB on January 31, 2006, 01:11 PM

cling film :)

Title: Re: need a number plate insert, to allow use of decals, any ideas?
Post by: silentpartner on January 31, 2006, 06:28 PM

i got a plastic folder from staples/office world, that was obscured semi clear and was able to cut it with sharp scizzors.  ;)

Title: Re: need a number plate insert, to allow use of decals, any ideas?
Post by: d14vd_h on January 31, 2006, 08:28 PM

had a eurika,
asetate!!!!
as used by OHP's
sorted

Title: Re: need a number plate insert, to allow use of decals, any ideas?
Post by: Waxintaxin on January 31, 2006, 08:37 PM

mate pm me , we use a clear plastic sheeting for documents nice ans thin and easy to cut , l have loads of it pm addy and i will try to send a few your way

Rich