RADBMX.CO.UK

Mid School BMX (>87) 1989 to 2003 (<05) => Mid School ( Keep the faith ) => Topic started by: SaMAlex on January 05, 2009, 01:59 PM

Title: Clamp on Redneck mod â€¦ early GFR?
Post by: SaMAlex on January 05, 2009, 01:59 PM: Here is a little something I found over the weekend. Itâ€™s a modification I did to a stem. No big deal now, but it was new at the time.

I never really liked the top plate on a gyro so when I changed over to a 1 1/8th frame, my old 1â€ gyro top plate didnâ€™t fit the forks and I was forced to do something about it (â€œoversizedâ€ gyros werenâ€™t all that available at the start of 1 1/8th, hence the 1â€ clamp-on forks). I got a stem (an early, square edge clamp on redneck, without the curved cut-out underneath for gyro clearance), and drilled and tapped the sided of it for cable adjusters. It was no where near as neat as the gyro friendly stems (with the built in gyro plate) that came out a bit later, but I really didnâ€™t want to use the gyro top plate.

The only mistake I made was that I put the adjusters too high on the stem so the lower part of the gyro cable was too short to reach the gyro itself! Luckily, I used to shorten my lower cable anyway using clamp on nipples (well, spoke nipples and a vice), so I just left more inner cable above the nipple to cope with it.

Like I said, not a big deal now but I liked it at the time. Once the gyro friendly rednecks were out, I got one of them and they were much better.

(http://www.radbmx.co.uk/archive/albums/r313/alexleech/Bikes/Redneckmod1.jpg)

(http://www.radbmx.co.uk/archive/albums/r313/alexleech/Bikes/Redneckmod2.jpg)

(http://www.radbmx.co.uk/archive/albums/r313/alexleech/Bikes/Redneckmod3.jpg)
Title: Re: Clamp on Redneck mod … early GFR?
Post by: kev-s on January 05, 2009, 02:48 PM: cool i like homemade stuff :daumenhoch: :daumenhoch: sharp edged rednecks are 8) 8) 8) alex as you like to make/modify things to solve problems with your bike do u rekon you could make a cassette that engages and feels like a freewheel? its the only thing about new school bikes that i dont like :knuppel2: :knuppel2:
Title: Re: Clamp on Redneck mod … early GFR?
Post by: SaMAlex on January 05, 2009, 02:55 PM: Quote from: kev s on January 05, 2009, 02:48 PM
alex as you like to make/modify things to solve problems with your bike

Na, not any more. No time, and not the same need as back then. My bike works, straight out of the box so Im happy to go with it (Even if the cassette does click like its going to slip from time to time)
Title: Re: Clamp on Redneck mod … early GFR?
Post by: JT71 on January 05, 2009, 03:05 PM: Quote from: S&MAlex on January 05, 2009, 02:55 PM
My bike works, straight out of the box so Im happy to go with it (Even if the cassette does click like its going to slip from time to time)

glad that's not just mine that does that then.

neat mod too mr Leech. :coolsmiley:
Title: Re: Clamp on Redneck mod … early GFR?
Post by: kev-s on January 05, 2009, 03:30 PM: was worth a try, so your modiyfing days are over u have give us some great things :daumenhoch: :daumenhoch:
Title: Re: Clamp on Redneck mod … early GFR?
Post by: darkersomeday on January 05, 2009, 03:31 PM: want to swap it for my enduro gfr alex? :LolLolLolLol: :LolLolLolLol: :LolLolLolLol: :LolLolLolLol:

nifty mod that mate :daumenhoch:
Title: Re: Clamp on Redneck mod … early GFR?
Post by: Philbert on January 05, 2009, 04:23 PM: reminds me of bucknuttys!

i love you alex, you always make me smile
Title: Re: Clamp on Redneck mod … early GFR?
Post by: welsh denny on January 05, 2009, 08:29 PM: if frankenstein rode bmx freestyle, he'd run that stem.... :LolLolLolLol:
Title: Re: Clamp on Redneck mod … early GFR?
Post by: condor96 on January 05, 2009, 08:39 PM: was your stem inspiration for gyro friendly rednecks? 8)
Title: Re: Clamp on Redneck mod … early GFR?
Post by: wirewheel on January 05, 2009, 08:57 PM: classic-vice/spoke nips them was da days :LolLolLolLol:
not had a gyro since got rid of that 1" standard lengthy

i dropped the gyro and front brake for good when i had the os ng dirtbike. that was still a tank.
Title: Re: Clamp on Redneck mod … early GFR?
Post by: harris on January 05, 2009, 09:00 PM: cool mod alex,so simple but works 10/10
Title: Re: Clamp on Redneck mod … early GFR?
Post by: SaMAlex on January 05, 2009, 10:53 PM: Quote from: condor96 on January 05, 2009, 08:39 PM
was your stem inspiration for gyro friendly rednecks?

No, I dont think so. I didnt really show it to anyone, and I dont think rednecks were the first stem to come with a built in gyro plate. I forget what stem was, but I do remember being pleased that S&M did a GFR Redneck .... although that might have been just so I could get rid of my home made one! :-[
Title: Re: Clamp on Redneck mod … early GFR?
Post by: noddybeard on January 09, 2009, 06:49 PM: Mr Leech yet another of your quality solutions/inventions.
This should be in the 'British Innovations to the BMX industry' thread...
I honestly believe you are more resposible for the state of BMX components that are around today than you give yourself credit for.
Title: Re: Clamp on Redneck mod … early GFR?
Post by: laughinggravy on January 12, 2009, 04:17 PM: Nice modded stem, did you use your asymmetric bars with that one? ;) :2funny: :idiot2: :LolLolLolLol: etc etc etc !!
Title: Re: Clamp on Redneck mod … early GFR?
Post by: SaMAlex on January 12, 2009, 09:25 PM: Quote from: laughinggravy on January 12, 2009, 04:17 PM
Nice modded stem, did you use your asymmetric bars with that one?

Hey, come on. Who hasnt cut down their bars and accidently cut the SAME side down twice? :crazy2:

(Well, no one nowadays as no one cuts their bars down any more)
Title: Re: Clamp on Redneck mod … early GFR?
Post by: TwoBobRob on January 12, 2009, 09:45 PM: I've heard of that many times as it goes :LolLolLolLol: