RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: sawzall on February 01, 2009, 06:53 PM
-
my daughter has a mid school mongoose with a 1 piece crank,she has started riding at the local scate park and wants a
small chainring like all her mates,but i know nothing about new school so what will we need to do,ie what is the smallest you can put on a 1 piece crank and what size freewheel would we need
cheers
mini sawzall :daumenhoch:
-
what size is currentley on the front and rear?
-
33/13 ;)
-
what size is currentley on the front and rear?
i think she has 44-16 but like i say i know nothing about new school :-[
thanks for any info ;)
-
as stated a 33 13 would be about right but the 13t freewheels aret all that reliable from what im aware unless it has a flip flop hub(threads on both sides of the hub) then the freewheel is abit better.
-
Phil, i have a 40T Crupi chainring here mate you're more than welcome to try.
(http://www.radbmx.co.uk/archive/albums/p191/carpcrazyox/ring1.jpg)
-
Ran an Odyssey 13T for 2 years with no problems,only changed because I got a cassette hub.Check what rear hub you have,seen plenty of clueless peeps with a 16t rear and 25t front!
-
Ran an Odyssey 13T for 2 years with no problems,only changed because I got a cassette hub.Check what rear hub you have,seen plenty of clueless peeps with a 16t rear and 25t front!
i stand corrected re freewheel just going by what iv been told,we have loads of locals running that kind of ratio tis quite amusing to watch tho ;D