RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: rhino_mac on March 07, 2009, 07:14 PM

Title: Pedal size
Post by: rhino_mac on March 07, 2009, 07:14 PM

I Hope you guys can help!

I'm building up a Kuwahara Laserlight and I'm unsure of what size pedals to buy. I need some Suntour XC2's and I've seen them in 1/2" and 9/16".

It's likely I'm going to start off with some brand new 180mm Chrome Flight cranks, and eventually buy some 400's with the built in spider.

What size would I need for this crank? 1/2" or 9/16's

Thanks very much!

Rich

Title: Re: Pedal size
Post by: sawzall on March 07, 2009, 07:20 PM

9/16 for three piece 1/2 for one piece;)

Title: Re: Pedal size
Post by: rhino_mac on March 07, 2009, 07:26 PM

Superstar! Thanks!

Typical that the NOS are 1/2" then...................never mind, it's gonna be a rider so perhaps some used ones are a better idea anyway!

Title: Re: Pedal size
Post by: oldschool rider on March 08, 2009, 11:15 AM

Quote from: rhino_mac on March 07, 2009, 07:26 PM

Superstar! Thanks!

Typical that the NOS are 1/2" then...................never mind, it's gonna be a rider so perhaps some used ones are a better idea anyway!

If you can get a set of DX copy's eg wellgo, victor or somethin you can change the spindles in the pedals.  :daumenhoch: