RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: Peter J on April 05, 2009, 07:51 PM

Title: Redline N/S Crank Bearings
Post by: Peter J on April 05, 2009, 07:51 PM
What size are they ?

I.D x O.D x Width............please
Title: Re: Redline N/S Crank Bearings
Post by: Gary72 on April 05, 2009, 09:06 PM
Have the old bearings got a ref number on the side, something like 6004, 6002. Normally followed by RS. Just punch it in ebay and bearing sellers will come up with sizes. Think the bearings are normally 12mm wide
Title: Re: Redline N/S Crank Bearings
Post by: kuwahero on April 05, 2009, 09:17 PM
depends on what type of bb you got US or Euro


Title: Re: Redline N/S Crank Bearings
Post by: Peter J on April 05, 2009, 09:24 PM
They could well have......but here lies the problem, at the bottom on my garden is a field, its currently dark and somewhere in that field is a pair of N/S redline flight bearings.......

I tried to remove the little angels today but for some reason they were a little resistant to my advances.......so for some strange reason I started taking to then in tongues.....(or that’s what my wife told my daughter I was doing, who was watching daddy from the inside of the house I may add....)

After removing the little blighters I proceeded to walk out of the garage and hurl them into orbit.......explaining to the little chappies that I didn’t believe they had a farther and that some form of self fornication would be a good idea...............at the time I thought that explaining this to an inanimate object it may understand the errors of its ways, however after a couple of glasses of a nice Chianti I realised the errors of my ways

 :uglystupid2:
Title: Re: Redline N/S Crank Bearings
Post by: Peter J on April 05, 2009, 09:25 PM
depends on what type of bb you got US or Euro




US they are on an O/S Frame..........Vector  :smitten:

And this is my 600th post  :daumenhoch:
Title: Re: Redline N/S Crank Bearings
Post by: kuwahero on April 05, 2009, 09:33 PM
here you go peter. these will fit it
http://www.customriders.com/prodshow.asp?prodid=6284&cat=10&parent=1001&sid=3 (http://www.customriders.com/prodshow.asp?prodid=6284&cat=10&parent=1001&sid=3)

Title: Re: Redline N/S Crank Bearings
Post by: Peter J on April 05, 2009, 09:36 PM
 :4_17_5:


Cheers Fella
SimplePortal 2.3.5 © 2008-2012, SimplePortal