RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: Brownie on February 17, 2006, 01:18 PM
-
WD40 everywhere. Trashed the workbench....any other ideas?
Cheers, JB
-
A blowtorch and a big hammer ;)
-
Hi
This may help - http://www.radbmx.co.uk/forum/index.php'topic=5501.0
Or do a search.
J.
-
Soaking in Coca Cola has done it for me in the past (overnight or renew then longer)
-
Thanks for that. The thread has made me even more depressed! It is an alloy SE seatpost inside a looptail frame and I was hoping to preserve both. Gonna soak over night and have another crack tomorrow. Will post some pics if I can work out how. Cheers for the help. JB
-
soak em in diesel. good quality 15mm spanner and scaff pole while the crank arm is in the vice.
-
i got a SE post out of a Loopy loo with this little trick
Drilled a 6mm hole through the top and out the other side (so not to waste too much of the post, then put a long bolt through to get a grip of it, put it in the vice, grabbed the stays and the head tube and twistd (gently)
out it came
I know then re not all that easy, but it will come :)
-
Says the upload folder is full. I guess it's not my day, eh? :yahoo_silent: Thanks for the advice chaps. Will have anolther bash tomorrow. Cheers, JB