RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: Stella Dave on April 24, 2009, 12:22 PM

Title: Filling polished DX pedals??
Post by: Stella Dave on April 24, 2009, 12:22 PM

Is it possible to fill polished DX? There's a small bit chipped out where a pin has bent out.
Is there anything that would fill the small gap beside pin and polish up?

Cheers

Title: Re: Filling polished DX pedals??
Post by: snav69 on April 24, 2009, 12:47 PM

 :-\

http://cgi.ebay.co.uk/Strong-Alloy-Wheel-Damage-Kerbing-Repair-Putty-Compound_W0QQitemZ370183186068QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item370183186068&_trksid=p3286.c0.m14&_trkparms=72%3A1689%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318

 :coolsmiley:

Title: Re: Filling polished DX pedals??
Post by: soll36 on April 24, 2009, 12:49 PM

dont know if the above stuff will polish up but i'd get it welded mate then file etc back to shape then that'll polish up nicely..    :daumenhoch:

Title: Re: Filling polished DX pedals??
Post by: sid1972 on April 24, 2009, 08:23 PM

not sure if it will work, but I would try solder first...

it will not hurt to try and if the chip is small and they are polished the finish maybe near to.

just a thought!  :daumenhoch: