RADBMX.CO.UK

BMX General => BMX Chat => Topic started by: synergy1968 on September 01, 2009, 12:32 AM

Title: Haro Group 1 Pro Series or not ?
Post by: synergy1968 on September 01, 2009, 12:32 AM
(http://www.radbmx.co.uk/archive/albums/k240/synergy1968/stevepics042.jpg)

(http://www.radbmx.co.uk/archive/albums/k240/synergy1968/stevepics045.jpg)


Bought this was told its a very hard to find Haro Group1 Pro Series. It has a stamp on the underside Made In Mexico.
Would you saye this is the real deal ? Would be good to find out some history about this bike. Cheers ;) it looks the part i have to saye ,bought from leeds of ebay ,,,,,,
Title: Re: Haro Group 1 Pro Series or not ?
Post by: moley on September 01, 2009, 01:06 AM
Get closer pics of the dropouts, headtube, gussets and the rest of the tubing and joins and any stamps on the bike!!

It will all help the identification!!

There are plenty of Haro fanatics on here that should be able to tell you whether its genuine or not!!  :daumenhoch:
Title: Re: Haro Group 1 Pro Series or not ?
Post by: Swivel on September 01, 2009, 08:52 AM
Really nice that mate! Does it bike have any chevrons on it? Should have one on the gusset and also one on the forks if I remember rightly. Also what is the serial number? And where is that stamped? Bottom bracker or rear dropout? Most Haro's were stamped on the rear dropout but some were done on the BB on later models.

Matt  ;)
Title: Re: Haro Group 1 Pro Series or not ?
Post by: Glynnyboy on September 01, 2009, 11:26 AM
It does look like one. You can get a bit of info about these off the bmx museum. Read the posts of the 2 or 3 that are in there for info. Out interest what size is the tt ?
Title: Re: Haro Group 1 Pro Series or not ?
Post by: synergy1968 on September 01, 2009, 02:51 PM
Get closer pics of the dropouts, headtube, gussets and the rest of the tubing and joins and any stamps on the bike!!

It will all help the identification!!

There are plenty of Haro fanatics on here that should be able to tell you whether its genuine or not!!  :daumenhoch:


Will do , will have loads of pics up asap  :daumenhoch:
Title: Re: Haro Group 1 Pro Series or not ?
Post by: synergy1968 on September 01, 2009, 02:53 PM
Really nice that mate! Does it bike have any chevrons on it? Should have one on the gusset and also one on the forks if I remember rightly. Also what is the serial number? And where is that stamped? Bottom bracker or rear dropout? Most Haro's were stamped on the rear dropout but some were done on the BB on later models.

Matt  ;)

Cheers bud . will take some more pics later and post um up.. :daumenhoch:
Title: Re: Haro Group 1 Pro Series or not ?
Post by: synergy1968 on September 01, 2009, 06:25 PM
(http://www.radbmx.co.uk/archive/albums/k240/synergy1968/stevepics042.jpg)

(http://www.radbmx.co.uk/archive/albums/k240/synergy1968/stevepics045.jpg)


Bought this was told its a very hard to find Haro Group1 Pro Series. It has a stamp on the underside Made In Mexico.
Would you saye this is the real deal ? Would be good to find out some history about this bike. Cheers ;) it looks the part i have to saye ,bought from leeds of ebay ,,,,,,

(http://www.radbmx.co.uk/archive/albums/k240/synergy1968/1045.jpg)

(http://www.radbmx.co.uk/archive/albums/k240/synergy1968/10[img]http://www.radbmx.co.uk/archive/albums/k240/synergy1968/1044.jpg)51.jpg[/IMG]



(http://www.radbmx.co.uk/archive/albums/k240/synergy1968/1046.jpg)
(http://www.radbmx.co.uk/archive/albums/k240/synergy1968/1026.jpg)
(http://www.radbmx.co.uk/archive/albums/k240/synergy1968/1015.jpg)
(http://www.radbmx.co.uk/archive/albums/k240/synergy1968/1016.jpg)
(http://www.radbmx.co.uk/archive/albums/k240/synergy1968/1019.jpg)
(http://www.radbmx.co.uk/archive/albums/k240/synergy1968/1018.jpg)(http://www.radbmx.co.uk/archive/albums/k240/synergy1968/1020.jpg)
(http://www.radbmx.co.uk/archive/albums/k240/synergy1968/1018.jpg)

The bike has a number on the rear frame by wheel 000978
Title: Re: Haro Group 1 Pro Series or not ?
Post by: WizardWeb on September 01, 2009, 06:38 PM
Weren't a lot of the Pro-series frames made by Kastan, who I think had a factory in Mexico? You know, Linn Kastan of Redline fame.

Bob Haro also designed some frames for Kastan that had single leg forks, if memory serves.
Title: Re: Haro Group 1 Pro Series or not ?
Post by: OrgasmDonor on September 02, 2009, 02:12 PM
whats the tt length of that? looks short for a pro series, but its deffo legit and as labelled, nice bike :daumenhoch:
Title: Re: Haro Group 1 Pro Series or not ?
Post by: HEYWOOD BMX on September 02, 2009, 02:23 PM
 :) Tasty bike :daumenhoch:
Title: Re: Haro Group 1 Pro Series or not ?
Post by: motomagII on September 02, 2009, 02:30 PM
yep looks spot on nice ride there.whats the tt length though does look like 20 incher or less i though they were all 20.5 or like mine 22 .def not 22 incher for sure
Title: Re: Haro Group 1 Pro Series or not ?
Post by: synergy1968 on September 03, 2009, 11:05 PM
yep looks spot on nice ride there.whats the tt length though does look like 20 incher or less i though they were all 20.5 or like mine 22 .def not 22 incher for sure


Will do the tt asap ,,,, o i love a good find on ebay .... Thought it would go for big ££££ but paid very little for it?  :smitten: 8)
Title: Re: Haro Group 1 Pro Series or not ?
Post by: moley on September 04, 2009, 12:14 AM
I think Gashead was floggin one when I bout that GT Cruiser off him!!

Measure the TT from Centre of Headtube to Centre of Seat tube!!  :daumenhoch:

I reckon it will be 20.25" to 20.50"  ???
Title: Re: Haro Group 1 Pro Series or not ?
Post by: synergy1968 on September 04, 2009, 12:35 AM
I think Gashead was floggin one when I bout that GT Cruiser off him!!

Measure the TT from Centre of Headtube to Centre of Seat tube!!  :daumenhoch:

I reckon it will be 20.25" to 20.50"  ???
Wiil do :daumenhoch:
Title: Re: Haro Group 1 Pro Series or not ?
Post by: moley on September 04, 2009, 12:39 AM
I found the Gashead's For Sale thread but the Pictures have been removed.

But I think it was the same Haro frame as yours.   Gashead measured it to be 20.5" TT
Title: Re: Haro Group 1 Pro Series or not ?
Post by: synergy1968 on September 04, 2009, 12:53 AM
I found the Gashead's For Sale thread but the Pictures have been removed.

But I think it was the same Haro frame as yours.   Gashead measured it to be 20.5" TT

What did it go for bud?
Title: Re: Haro Group 1 Pro Series or not ?
Post by: moley on September 04, 2009, 08:55 AM
I haven't a clue!!

It was up for a while so probably someone offered a price and he accepted.

I think his was NOS though, so that ups the price!!

I wouldn't worry about the cost side of things.

I pay whatever I'm willing to pay for whatever item is available at the time.

Most times I pay over the odds because I'm impatient and not willing to wait until a better deal comes along.   I'm not in it to buy cheap and then sell it back higher.   If I like the look of something and I THINK I need it then I'll just buy it!! 

I'm hoarding my gear until I'm sure it will never be used and then I'll get rid!!

One day a thread will appear in the For Sale for 100's of Components and a few hundred magazines!!   I'm not looking forward to those logistics!!

So dont worry about what anyone else paid.  If your happy with your purchase then thats the important thing. 

Only thing now is to get it raced!!  :daumenhoch:
Title: Re: Haro Group 1 Pro Series or not ?
Post by: WARDY on September 04, 2009, 09:05 AM
I haven't a clue!!





heres me thinking that your one hell of a detective  :LolLolLolLol:
Title: Re: Haro Group 1 Pro Series or not ?
Post by: moley on September 04, 2009, 09:43 AM
I haven't a clue!!





heres me thinking that your one hell of a detective  :LolLolLolLol:

I just use google!!

And the words Gashead, Haro and Pro Series produced too many hits.................so I couldn't be arsed!!

You could always ask Gashead!!!  :D
Title: Re: Haro Group 1 Pro Series or not ?
Post by: synergy1968 on September 06, 2009, 10:18 AM
yep looks spot on nice ride there.whats the tt length though does look like 20 incher or less i though they were all 20.5 or like mine 22 .def not 22 incher for sure

tt is 20  bud . just tarting it will post some pics soon.
Title: Re: Haro Group 1 Pro Series or not ?
Post by: leimeg21 on June 05, 2011, 10:23 PM
Really nice that mate! Does it bike have any chevrons on it? Should have one on the gusset and also one on the forks if I remember rightly. Also what is the serial number? And where is that stamped? Bottom bracker or rear dropout? Most Haro's were stamped on the rear dropout but some were done on the BB on later models.

Matt  ;)

Cheers bud . will take some more pics later and post um up.. :daumenhoch:
(http://www.radbmx.co.uk/archive/albums/k240/synergy1968/stevepics042.jpg)

(http://www.radbmx.co.uk/archive/albums/k240/synergy1968/stevepics045.jpg)


Bought this was told its a very hard to find Haro Group1 Pro Series. It has a stamp on the underside Made In Mexico.
Would you saye this is the real deal ? Would be good to find out some history about this bike. Cheers ;) it looks the part i have to saye ,bought from leeds of ebay ,,,,,,

Hi mate some history on your bike, I built this bike about 3-4 years ago , I sold it to a woman on ebay and she sold it almost straight after buying it.I bought everything from ebay.it was one of the first builds i had done after 20 odd years of riding BMX.I ground the lugs of the pedals to look like real dx's and bought all the goodies like the sr semi fluted seat post and the takagi crank.Wondered if you still had it cos I never actually rode it that far but i remember it being nice to ride.
I should have some pics of it in my back yard if you want to see them or just as proof!!!!
Graham
SimplePortal 2.3.5 © 2008-2012, SimplePortal