RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: moley on October 29, 2009, 10:12 AM
-
I'm after something with the same consistancy as a proper Pro Class Rim tape.
Something that looks the part and does the job.
Metallic tapes are quite thin and bulge out like the woman with the big bulgey eyes!! :(
I'd want a few different colors!!
Any ideas?
Cheers :daumenhoch:
-
hmmm.
i went to the habidashiry section in john lewis and bought a thin roll of fabric...
got a nice metallic look to it and is quite thick.
on the DY ( any excuse)
(http://www.radbmx.co.uk/archive/albums/q204/jonathonsturner/DSC00719.jpg)
-
Couldn't you use anything then cover that with a regular rim tape?
-
thats what i did.
-
I'm using some metallic tape with the cardboard backing still on...........plus some electrical insulation tape and a proper rubber rim strip.
The trouble is its still bulges out too much with 50-60 psi behind it and looked a little to flimsy.
I was wondering if anyone has found a better alternative.
-
Used black tape and used some masking tape as backing for these and it worked ok
(http://www.radbmx.co.uk/archive/albums/vv191/stevochb/SDC10656-1.jpg)
-
used ribbon for these ones with masking tape.
(http://www.radbmx.co.uk/archive/albums/vv191/stevochb/SDC10340.jpg)
-
There's a guy on usa ebay that does em, think they are $25 a pop but are just like the real thing. Think he's over on bmx museum, d cristo or somthing his name is, check him out nice lad :daumenhoch:
Type Mongoose Pro Class in USA E-BAY, should find em there :daumenhoch:
-
have used lats from an aluminum blind before its about 1/2 mm thick so bends round the rim well , cover with gaffa tape to keep it in place and protect the tube from getting nipped , can be sprayed to the colour you want and cos its alli you don't get any bulge :daumenhoch: pm moley if you want some i got miles of the stuff :daumenhoch:
(http://www.radbmx.co.uk/archive/albums/ff98/jimjdld/bmx/DSCN2047.jpg)
(http://www.radbmx.co.uk/archive/albums/ff98/jimjdld/bmx/DSCN2048.jpg)
-
i've used "mylar" silver on one side, white on other. held in place with a normal rim tape. got it off ebay ;)
-
All different coloured foil ribbon here :
http://shop.ebay.co.uk/ed1835/m.html?_nkw=foil+ribbon+19mm&_sacat=0&_trksid=p3911.m270.l1313&_odkw=&_osacat=0
-
Cheers lads!!
I'll work out what I need and formulate a plan of action!!! :D
-
http://cgi.ebay.co.uk/Thin-steel-strip-0-004-x-10-metres-Shim-Polished_W0QQitemZ290361199970QQcmdZViewItemQQptZUK_BOI_Metalworking_Milling_Welding_Metalworking_Supplies_ET?hash=item439ae04d62
Its shim steel so low carbon content :-\
-
supose packing out the inside rim with 2lb of tape is defeating the object why they were drilled out in the first place.... :D
-
This was on the bmxmuseum too ;)
http://bmxmuseum.com/forums/viewtopic.php?id=170516
Supplier here
http://www.uniquetrials.com/V3/Products/VIZ/viztape.html