RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: bmxband1t77 on October 14, 2014, 02:36 PM
-
Hi
well its not a bike or part in that sense but i found my original YES helmet in mums loft the weekend.
the problem is all the lining foam padding has turned to dust!!
some of the lining fabric is intact.
original haro visor!!! "wantit"
does anyone know who or how i can restore this rather lovely helmet?
-
Stick a few pics up mate :daumenhoch:
-
Hopefully back in loft weekend. I've got a bit to dig out.
Yes helmet
Original Haro elbow savers
Arraya unspoked blue rims
Aero brake fender
Haro plate
'84 GT pro performer survivor exactly as I stopped riding around mid '90's.
83-4 PK ripper busted up n bent landing gear.
Oh and a load of BMX plus mags n the uk ones I think.
Also asked mum to dig out any rad pics for scanning up. I got loads at ROM even the Haro day when it tipped down. Some at Redditch and outside my house in Knowle. None I'd B'Ham wheels tho? Strange.
From iThing Apple Alien Tech on Tapatalk
-
Get digging :daumenhoch:
-
Nice, look forward to seeing the Ripper, these days that could well be repairable :daumenhoch:
-
Hope to upload pics tonight. Ill start with the helmet n stuff. Then work my way down. Mebbe start a new thread.
From iThing Apple Alien Tech on Tapatalk
-
Well here it is. As top of thread the lining has perished completely turning to dust!
Hopefully someone knows where it can be relined?
I forgot how much I'd 'personalised' this too.
(http://tapatalk.imageshack.com/v2/14/10/21/04b9e7d1ba4ae5b1a830bbf2b61b9fc8.jpg)
(http://tapatalk.imageshack.com/v2/14/10/21/ca3515165454a28ff82e9a2a7eb1ce57.jpg)
(http://tapatalk.imageshack.com/v2/14/10/21/cb232d3565396d8aa79ab384905d1a27.jpg)
(http://tapatalk.imageshack.com/v2/14/10/21/e8e0dcb5da7867986626ad53226cdb7b.jpg)
Lovin that huge CW sticker!
(http://tapatalk.imageshack.com/v2/14/10/21/93cdd1844a2dc22abd196c264c3eb393.jpg)
And original JT chinguard. I remember being well chuffed getting this.
(http://tapatalk.imageshack.com/v2/14/10/21/dffbd7d088085d0ac35231e663cfb686.jpg)
(http://tapatalk.imageshack.com/v2/14/10/21/3e50bf32e1f0f3c2261260df559fedc2.jpg)
(http://tapatalk.imageshack.com/v2/14/10/21/a4bfd8e0837bf780065745a9c4e5cf5e.jpg)
Thought I'd lost the original face guard.
(http://tapatalk.imageshack.com/v2/14/10/21/7e4391b3d6736764518af821f3d1c26c.jpg)
(http://tapatalk.imageshack.com/v2/14/10/21/2f9db73ec3785b3f502705a96fc56487.jpg)
(http://tapatalk.imageshack.com/v2/14/10/21/acbca3355b0ded695b51ad385af7cd2b.jpg)
From iThing Apple Alien Tech on Tapatalk
-
That's well cool mate!
-
Sooooooo
Anyone got any help to get this helmet back to glory?
From iThing Apple Alien Tech on Tapatalk
-
Sooooooo
Anyone got any help to get this helmet back to glory?
From iThing Apple Alien Tech on Tapatalk
I have the same Yes helmet with the same crumbled foam lining. I got mine for a manikin display so wasn't too bothered :-\
I'll have another look at it and see if I can make any suggestions :daumenhoch:
-
Cheers. It'd be nice to wear it again just for show. Doubt it's safe anymore tho.
From iThing Apple Alien Tech on Tapatalk
-
83-84 bak in the day. Dunno where original visor went? Last week I got a pair of Vans just like the ones here! Amazing. 😎
(http://tapatalk.imageshack.com/v2/14/10/23/0a750912b2e3a94e31b41d2c34783827.jpg)
From iThing Apple Alien Tech on Tapatalk
-
That's a very nice ride even for today's standards let alone BITD :coolsmiley:
-
It was supposed to be Sid Salisbury's SE factory frame. He sold it to me while I was working in Rad City BMX Benfleet. He got a white n red Quadangle instead cos he's a lanky bloke. Still got the F&F today but it's fooked...sniff
Tbh when I get time I've got loads of scanning to do after clearing out my loft.
Hopefully someone will help me get the skid lid back into use.
From iThing Apple Alien Tech on Tapatalk
-
Cool lid, I had exactly the same one bitd. Maybe you could just literally glue some new foam in there? with spray adhesive?
Cool 1 handed endo too! one of my fave tricks!
:daumenhoch:
-
apparently YES helmets are now made by SPARCO in Italy, so you could try them or you could try these people, the are a uk based helmet maker that may be able to advise you :daumenhoch:
http://davida.co.uk/
-
cheers guys...something to go on at least.....
-
Nice thing to have that Jon :daumenhoch:
-
Thanks. I dug it out for the Southend ride last Saturday but as you can see linings fooked.
Something Deeman said made me think ( pennies dropped)
I have a recent unused bell helmet ( the strap studs are rusty from daily commuter use).
So might look into easing out the high impact foam out of that n squeeze and glue it into the YES. Both helmets fit snug so like there's not alot in it.
Worth trying first.
Course it will only ever be worn for show. It's likely to crack after all these years.
Cheers guys.
From iThing Apple Alien Tech on Tapatalk
-
If all fails I'll look into Delrays suggestions.
From iThing Apple Alien Tech on Tapatalk
-
What a great thread some great bitd stuff :daumenhoch:
I bought a few helmets one of which was a yes same as yours and yes foam was dust but cloth was intact and brushed it off washed in warm water in sink by hand it came up lovely then I replaced foam cheap as chips cut into Shape I've only taped into place so far till I work out what adhesive to use.isnt a rush job but is doable :daumenhoch:
-
sweet, thanks...good to hear from someone whose actually tried it out.
yer, i need to get the dyson inside that skid lid....i was covered in dust when i found it!
did you see my post on the team jersey thread? original lee cooper tim march series actually signed by him!!! i won it after a day of race training at benfleet bmx track. OMG.
-
love threads like this that are a bit out of the ordainary but still BMX related :)
keep us updated as to how you get along :daumenhoch:
-
I threw my old Yes open face out back in 1997, along with my Oakley Goggles as the foam had completely deteriorated on both of them but I did keep the JT RAcing Mouthguard and Oakley Half Mask. Then after I moved to Oz sometime in 2010 my mum called me and said she had found my first proper open face BMX helmet (the green Protec didn't count LOL!) in the loft at our old house. I'm not sure of the make but the lining was in one piece, a little loose but ok and the high impact foam has seen better days but it's all in one piece. I picked up a Haro Visor from Diesel (Dan) and found some Oakley Goggles on eBay...
(http://i54.photobucket.com/albums/g114/martycoughlin/38f0ae7e.jpg)
-
Nice. Real nice that. Looks really clean too. Like the way the mouth guard mates with the visor.
Still hunting for that spare Bell helmet to rip out the lining.
From iThing Apple Alien Tech on Tapatalk
-
NOOOOOOOOOOOOO!!!!
(http://tapatalk.imageshack.com/v2/14/11/03/128513d78b3209bfc3714b3ced1c6d3b.jpg)
The spare Bell helmet was put out for recycling.
Darn it.
Scuppered that plan. Would have worked too I'm sure. Oh well.
From iThing Apple Alien Tech on Tapatalk
-
Well. Thinking about it. It might be worth getting Cheapo crappo skid kid to try easing out the foam into the YES.
From iThing Apple Alien Tech on Tapatalk
-
i think i still have my yes ff, the lining did the same think, also got an echo with a visor riser somewhere
-
Bung up some pics buddy. We're all YES helmet pervs here!!!! 😀😀😀😀
From iThing Apple Alien Tech on Tapatalk
-
here it is i'll have to try to find it
(http://i193.photobucket.com/albums/z203/garran01/Untitled-1-1.jpg) (http://s193.photobucket.com/user/garran01/media/Untitled-1-1.jpg.html)
(http://www.radbmx.co.uk/archive/albums/z203/garran01/sport84.jpg) (http://s193.photobucket.com/user/garran01/media/sport84.jpg.html)
-
That'll be nice to see a FF example.
RAD pics.
What's the track?
That track looks a quagmire!
Full strip n rebuild after that I rekon.
Where's the indoor shot?
From iThing Apple Alien Tech on Tapatalk
-
i think its up my old man's attic i'll have to have a look, the track is Houslow 84 national, indoor a local sports centre
-
Cool. Hope you find it!
Racing a Quadangle.
To me looks like you're running skinny wheels there? 1 3/8? B'Ham wheels team had a habit of running them.
From iThing Apple Alien Tech on Tapatalk
-
its a trm on 1.5 araya aeros!!
-
HOHO. Now I zoom in I can see it's not a Quaddie. every day is a Skool day! Well I've learnt something today. Can't remember that TRM. Reynolds tubing, racing a TRM freestyler on 1.5's. Nuttah! Have you built one for yourself since or still got it?
Jonboy
From iThing Apple Alien Tech on Tapatalk
-
no i sold it bitd, went back to my supergoose to race then freestyled on it