RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: Disco Dave on March 11, 2018, 06:48 PM
-
Hi,
I just got a new sprocket (Stolen cartwheel). I noticed the top hat washer doesn't fit tight into the sprocket, there's just under a mm play between the sprocket and the washer. So when it's on and I turn the sprocket the chain goes from tight to loose, at the same point in every revolution.
Should there be play between the washer and the sprocket like this?
-
Sounds like you need another top hat washer... there are slightly different sizes. :daumenhoch:
-
Thanks but I don't think it can be that. The gap between the top hat washer and sprocket is only like 0.5mm. The different top hat washers available are 5/16" to 22mm, 5/16" to 19mm, an 22mm to 19mm. 5/16" is 23.8mm so if it wa the wrong washer it would have a 2-3mm gap. Also I have three 5/16" top hat washers, all fit the same with a little play in the sprocket.
They should fit tight with no play right?
-
Yes, the top hat washer should be a good tight fit
-
They've refunded me and told me to throw the sprocket away. Anyone want a dodgy Stolen Cartwheel 25t polished silver cheap? :LolLolLolLol:
-
keep the sprocket if you like it , shim the gap with a pop can........ sorry i'll get me coat :-[ i meant beer can guiness ones are recomended by myself :daumenhoch: