Post by: griff on December 11, 2018, 04:19 PM
- Please post a full build spec for your entry.
- You may post a maximum of 4 pictures of your bike ( no tiled images - 4 individual pictures )
- You MUST still own the bike you enter.
- Your entry MUST be a new build and have not been entered before, or, it must be a major rebuild with significant changes.
- The build MUST be completed within the month of entry
- All entries must be in before the 1st of the following month or they will be removed.
- Any entrant found 'canvassing' for votes or other forums/social media sites will have their bike removed.
Post by: Gra_goose on December 11, 2018, 04:55 PM
94.2 Ramp Room made Hoffman Big Daddy
94 Ramp Room Patriot bars
TNT stem
Hoffman Bikes grips
Bear trap 2 headset
Odyssey Gyro 2
Dia Compe tech 77 levers
Dia compe nippon front calliper with centraliser
Dia compe aa990 rear brake
Peregrine crazy 95 wheels
Acs RL Edge tyres
White Industries 16t freewheel
Hoffman Day Smith Pegs
Odyssey z77 seat
GT stamped Profile cranks
GT 44t chainring
GT DX style platform pedals
(https://uploads.tapatalk-cdn.com/20181211/041a09b4ac2bcf419b1b770d26231934.jpg)
(https://uploads.tapatalk-cdn.com/20181211/e3630eab76d9fdcb10b2c1bf93f18f2b.jpg)
(https://uploads.tapatalk-cdn.com/20181211/5e2bca266b8d9e751c83691723ab9de9.jpg)
(https://uploads.tapatalk-cdn.com/20181211/b7cafd7083a8986b7823130459acad0a.jpg)
Sent from my iPhone using Tapatalk
Post by: Grant_Stone on December 11, 2018, 08:29 PM
Replica of the bike I rode in the early 2000’s
Frame - Eastern Hercules
Forks - Eastern Amazon
Bars - Primo Moe’s Bars
Grips - Jive Tentacles
Stem - HDP (Hard Dad Products)
Headset - FSA Pig with Primo Gorilla Cup
Gyro - Odyssey XL
Cables - Odyssey Gyro 2
Levers - Dia-Compe Tech-77’s
Front Caliper - ACS Boa
Rear Caliper - Dia-Compe AD990
Brake Pads - Kool Stop Phat Padd
Seat - Primo Hemorrhoid
Seat Post - Primo Rod
Seat Clamp - Primo Viking
Cranks - Solid Bikes
Bottom Bracket - Solid Bikes
Chainring - Kink 44T
Pedals - Primo Super Tenderiser
Hubs - Seventies
Rear Wheel - Alex Supra E Pro
Front Wheel - Alex Supra E Pro
Tyres - GT Logo Blackwall 20 x 2.1
Pegs - Primo Stiffies
Chain - KMC
Chain Tensioners - Kink
Post by: Suicidepan on December 11, 2018, 11:45 PM
Frame - 1992 Standard Byke Co. Gardner Lengthy "Dave Freimuths personal frame"
Fork - 1992 Standard Byke Co. Prototype fork with Prototype Roller cam brake
Seatpost - Standard Byke Co. Prototype 1" raw finish & knurled
Pegs - 1992 Standard Byke Co. 3 1/2"
Bars - 1992 SE Made Hoffman Patriot
Wheels - Peregrine Super Pro with 1st get engraved Standard "Si" free coaster hub
Rear Brake - Suntour arms with modified Odyssey Pitbull cam
Tires - GT 2.10
Seat - Odyssey Z77
Seat clamp - DK
Cranks - Odyssey Excaliber
Sprocket - GT Team
Pedals - Shimano DX
Grips - EZ Jive
Brake levers - Dia Comp Tech 77 Japan stamped
Cables - Odyssey
Cable splitter - Primo 1st gen
Stem - TNT
Chain - KMC
Post by: griff on December 12, 2018, 09:20 AM
Loving the entries so far guys, keep em coming fistblump
Post by: dancetothedrummersbeat on December 12, 2018, 09:26 AM
Post by: pat-a-lar on December 12, 2018, 11:03 AM
Post by: Cherrypicker on December 12, 2018, 01:20 PM
Post by: Gra_goose on December 12, 2018, 06:55 PM
Sent from my iPhone using Tapatalk
Post by: oldscool on December 13, 2018, 03:30 PM
Post by: retrofreak on December 13, 2018, 05:24 PM
Frame - Ozone Method Air
Forks - Ozone
Headset - GT Epoch
Stem - ACS Slant (White)
Bars - Peregrine Q bars Gen 1 with holes (Chrome)
Grips - Mushroom II (Black/White)
Gyro - Odyssey Gyro Gen 1 (Chrome)
Brakes - Nippon (Polished) front with Odyssey Pitbull modded (White)
Brake Pads - ACS Z Plus (White)
Cables - Odyssey Slic and Gyro (White)
Levers - Odyssey RX-5 (Black/Polished)
Seat clamp - Peregrine
Seat post - Revcore Straight (chrome)
Seat - Skyway Grabber (White)
Crank - SR/GT Power Series
BB - SR
Chainring - Tioga Compact Disc 44T (White)
Pedals - Shimano DX
Chain - Izumi (Chrome)
Rims - Peregrine Super Pro HP-48's
Hubs - Suzue/Peregrine with Suntour Unbrake Freecoaster
Tyres - ACS RL Edge (Black)
Pegs - Odyssey Hollow Bullets
Post by: oldscool on December 15, 2018, 11:11 AM
Post by: Retrodan72 on December 15, 2018, 12:02 PM
Post by: In2bmx on December 15, 2018, 12:10 PM
Post by: griff on December 17, 2018, 03:18 PM
I’ve a little bit of vintage to enter as soon as I’m home . :chin:
Less talking, more building :daumenhoch:
Post by: In2bmx on December 17, 2018, 05:00 PM
78 Robinson Frame & Forks
78 Robinson Pro Bars
Redline double clamp stem
NOS Shimano tourney rear brake
Weinmann brake lever
Scott Mathauser brake shoes
NOS Oakley 1 Grips
NOS MX2 Headset
NOS Taihei padded seat
PLME seat clamp
Campagnolo cranks
Campagnolo chainring
Campagnolo euro bb NOS
Campagnolo chain ring bolts
Bob Reedy pedals
Gen 1 Weinmann 7B rims
Gen 1 Phil wood hubs
NOS Cheng Shin Tyres
NOS DID Chain
Fluted seat post
OG RAD PAD Button Pads
70’s Plate custom graphics
(http://i580.photobucket.com/albums/ss250/in2signs/IMG_9698.jpg) (http://s580.photobucket.com/user/in2signs/media/IMG_9698.jpg.html)
(http://i580.photobucket.com/albums/ss250/in2signs/IMG_9688.jpg) (http://s580.photobucket.com/user/in2signs/media/IMG_9688.jpg.html)
(http://i580.photobucket.com/albums/ss250/in2signs/IMG_9678.jpg) (http://s580.photobucket.com/user/in2signs/media/IMG_9678.jpg.html)
(http://i580.photobucket.com/albums/ss250/in2signs/IMG_9683.jpg) (http://s580.photobucket.com/user/in2signs/media/IMG_9683.jpg.html)
http://www.radbmx.co.uk/forum/index.php/topic,193869.0.html
Post by: dancetothedrummersbeat on December 17, 2018, 05:28 PM
Post by: SDF on December 18, 2018, 02:26 PM
I have been working on my replica for many years, and yesterday after five years of searching one of
my parts to complete the puzzle arrived from the US, a nos comp stadium tyre and it cost a bloody
fortune!!! (had to put new tyres on my car on hold for a month). After may hours of scrubbing the
tyre came up as new. Still need to source a couple more parts - 1) A NOS REAR COASTER SKYWAY 2)A
REDLINE/SUGINO 400 SERIES CRANK, both rare top dollar parts. Anyway, here is my December entry.
PARTS SPEC
1985 SKYWAY STREETBEAT FRAME AND FORKS.
TANGE HEADSET.
SKYWAY STEM.
SKYWAY EZ BARS.
ODI MUSHROOM GRIPS.
FLITE DONUTS.
DIACOMPE TECH 3 LEVERS.
DIACOMPE CABLES.
DIACOMPE MX 900 BRAKES.
MX 1000 SEAT CLAMP.
KASHIMAX AERO SEAT.
1980’S LAYBACK- ODYSSEY.
SKYWAY TUFF PADS.
SKYWAY STEM PAD.
SKYWAY TUFF WHEELS.
COMP STADIUM TYRES.
SHIMANO DX PEDALS.
ALANS REPLICA FLIGHT CRANK (ORIGINAL 400 TO SOURCE).
SUGINO CHIANWHEEL.
PORKCHOP SPIDER.
ANT SLIPGRIP TAPE.
SKYWAY PEGS.
WHITE 80’S CHAIN.
The last pic is me (far left) in my grey Nike top, bleached jeans and red vans watching Ruffell doing a cherry picker at the Kellogs in 1985, got his autograph that same day and it is proudly displayed on the bars of my beat.
Post by: factory pilot on December 19, 2018, 06:04 AM
Loving the mid school flavour too! Makes a refreshing change ...
Oh and I do love vintage too! ... as well as a rare tyre story! :4_17_5:
Post by: RaphaelLawson74 on December 19, 2018, 01:51 PM
Just finished this one, it was originally built by BMX Products Mongoose. Its a Racers Super X 1978 Nickel
I had been hunting one of these frames for some time, found one in Australia (I am in Manchester UK). After staying in touch with owner who had found the frame in a dump (old store clearance), he finally agreed to sell the frame on. It had been sprayed bombed, originally red and when i received it, matt black over the red. I was intending to paint it factory red but after stripping it realised it was nickel. The nickel had been protected perfectly under the paint. Many many hours of stripping and polishing. The look i was going for was a clean rider. Whilst waiting for the frame to arrive from Aus, I started purchase all parts from the US. Everything had to come from US as none was available in the UK, the seat clamp was the only thing that the UK. Its such a simple bike from the 70's that the parts list is fairly short. Its a pretty rare frame in the UK and i am glad to have been able to get some of this mongoose history back into the Uk.
Parts List
78 Frame
78 Ashtabula Forks, stem, crank
Three Arrows Chain Ring
Schwinn Bars
Schwinn bottom brack and headset
Stamp mongoose seat post and seat clamp
Faun black check seat
Kenda tyres
New decal kit from BMX Products
Winner Choice Grips (these were mega hard to get)
Mongoose stamped heavy guage wire 20' wheels
Bendix 76 coaster brake
stamped mongoose (union) pedals
The serious work on this bike was the frame itself, the weeks of solid polishing and striping work on the frame. Import taxes from the US were mental, but in the end, a really worthwhile project.
Post by: CustardLips on December 19, 2018, 02:39 PM
Post by: chubby on December 19, 2018, 09:44 PM
Sent from my G8341 using Tapatalk
Post by: retrofreak on December 21, 2018, 07:29 PM
Mid schools the new old school
Sent from my G8341 using Tapatalk
Agreed 100%
Post by: chubby on December 21, 2018, 07:32 PM
We've been saying that for years TrevorMid schools the new old school
Sent from my G8341 using Tapatalk
Agreed 100%
Sent from my G8341 using Tapatalk
Post by: Ady on December 29, 2018, 02:04 PM
Been emotional this one.
Build thread here..
http://www.radbmx.co.uk/forum/index.php/topic,194117.0.html
1. 1984 TRM U.K. made 531 Reynolds tubing chrome frame and forks
2. CW original bars
3. Sugino power stem chrome
4. Blue Tange 125 headset
5. Tange SK-115 SEIKO grips (NOS)
6. Dia Comp tech 3 84 dated levers chrome (NOS)
7. Dia Compe Black 84 dated front & rear brake cables
8. Dia Compe 84 dated Mx 1000 front & rear with NOS stamped brake pads & dia comp bolt caps
9. Aero stem pad Original part off “Wally’s original bike”
10. Aeroyal Bmx junior seat white (NOS)
11. GT winged blue and chrome seat clamp
12. 4130 stamped chrome layback seatpost
13. Sugino stamped 1PC
14. Shimano DX 1/2 Pedals
15. Pro Class Power Disc in original condition blue
16. Sugino 46t 110BCD machined polished edge chainwheel and bolts with NOS blue/silver chain
17. Tioga sealed bottom bracket 1PC BB-220 SB with stamped Tioga spanner (NOS)
18. Shimano stamped front and rear coaster hubs (NOS)
19. Araya 7x polished sides with stainless steel spokes
20. Kenda white wall 20x1.75 Freestyle tyres
21. TRM original stamped dust caps
(https://i.ibb.co/hWSmjfd/79-CE72-D8-A74-B-4459-B700-0-CEDFAC84-F8-C.jpg) (https://ibb.co/DCZRypM)
(https://i.ibb.co/nf9YHPp/923-E2664-07-EA-4-DE4-83-E5-5-B3652273-D26.jpg) (https://ibb.co/9261FZP)
(https://i.ibb.co/wLLJLLd/5598122-B-C9-D2-4-DEB-A666-9356095-BD3-C4.jpg) (https://ibb.co/9vvwvvp)
(https://i.ibb.co/99H2BcW/4-DE6-E930-350-D-4-F51-871-A-5-C10-E71879-A1.jpg) (https://ibb.co/Lzd6BY1)
Post by: factory pilot on December 29, 2018, 02:43 PM
I love the build thread too! :smitten:
Post by: bob1984bmx on December 29, 2018, 09:44 PM
Post by: SDF on December 30, 2018, 06:19 PM
Post by: griff on December 31, 2018, 02:08 PM
Great entries this month. Final push for 2018 people, get em in!! explosion
What he said ^ :daumenhoch:
Post by: Andyboy77 on December 31, 2018, 03:01 PM