RADBMX.CO.UK
Cupid Stunt Bike of the Month/Year => Past Entries => Cupid Stunt Bike of the Month/Bike of the Year => 2019 => Topic started by: In2bmx on February 11, 2019, 02:25 PM
-
Lets see what you have for February :daumenhoch:
- Please post a full build spec for your entry.
- You may post a maximum of 4 pictures of your bike ( no tiled images - 4 individual pictures )
- You MUST still own the bike you enter.
- Your entry MUST be a new build and have not been entered before, or, it must be a major rebuild with significant changes.
- The build MUST be completed within the month of entry
- All entries must be in before the 1st of the following month or they will be removed.
- Any entrant found 'canvassing' for votes or other forums/social media sites will have their bike removed.
-
Anyone :popcorn:
-
Not sure if Retro Builds are acceptable so if not please delete Carl.
Here’s my newly built 2013 Skyway 24” TA
Parts list as below:
2013 Skyway 24” Frame, Forks and bars.
Skyway 24” Black Tuffs
SE Vee Rubber 24x2.00 tyres
Mirage 37t chainring
Mirage Chainring Bolts
Profile Retro Spider
KMC Chain
Haro Euro BB
Redline 180 Twin Pinch Flytes
MKS-BM7 Pedals
80’s Kashimax Aero recovered in suede
AME Unitron Grips
Dia Compe MX1000 Calipers
Dia Compe Tech 3 Levers
SE Narler 1 1/8 Retro Stem
FSA Headset
Darxide Seat Post
Mirage Seat Post Clamp
-
-3 votes from me. :LolLolLolLol:
-
-3 votes from me. :LolLolLolLol:
😢
-
Nice one Steve :daumenhoch:
It’s more than welcome and staying :daumenhoch:
-
Working on my Torker last week added a nice set of green Mx 900's. The bike was found in a dilapidated shed about ten years ago and built up with cheap low grade 90's parts. Another long-term project 97% finished… Tuffs (from stevesred vxr ) Haro tyres and brakes were my last three big purchases, the Pro neck stem as at the coaters and will be fitted very soon.
• 1983 Torker 280X in original chrome finish.
• Haro gen1 re-release forks.
• UK Skyway tuff wheels.
• 80's Haro pegs,
• Haro freestyle tyres.
• Diacompe MX900 brakes
• Diacompe cables.
• Diacompe tech 4 levers.
• Skyway tuff pads.
• Sharp lever covers.
• Sharp bottom bracket boot.
• Haro thunderbolt covers.
• Skyway EZbars.
• Ame grips.
• Flite donuts.
• Pacific palms stem pad.
• Mirage plate.
• Torker stickerd stem? (pro neck stem in coater at the moment) back now , But too busy to fit it.
• Jam buttie seat clamp.
• Odyssey layback seat post.
• Dominator seat.
• Victor DX pedals.
• Sugino spider.
• Porkchop chain wheel.
• SR 1 piece crank.
• Unbranded chain ring bolts
• KMC chain.
• Tioga rear freestyle brake guard..
Stem pad will be located properly, when I fit my pro neck stem.
-
-3 votes from me. :LolLolLolLol:
😢
Only kidding Steve, a retro 24 or not, it’s still got your usual build quality. :radbmxsmilie:
-
Cheers, appreciated 😏
-
love that new school TA ;)
-
8) First rays of sun to shot my RL20-II finally 100% done :D
FRAME : REDLINE RL20-II RECHROMED + NEWPOWDER
FORK : REDLINE RL20-II RECHROMED
HEADSET : HATTA
SEAT POST CLAMP : PEREGRINE
SEAT POST : CHROMOLY
SEAT: ELINA FLIGHT TECH
HANDLEBAR : FORKLIFTER
STEM : REDLINE FORKLIFTER
GRIPS : OG 80's OAKLEY B2B
BRAKE LEVERS : LEECHI TECH 4 WITH STOPPERS
BRAKES : DC NIPPON
PADS : DIA COMPE
WHEELS : PEREGRINE HP 48
HUBS : SUZUE HIGH FLANGE 48S
TIRES : OG 80's PEREGRINE
FREEWHEELS : SHIMANO
CRANKS : REDLINE 401
CHAIN RING :REDLINE BUBBLE FONT
BOTTOM BRACKET : TIOGA 28TPI
PEDALS : SHIMANO DX
[attachment=1]
[attachment=2]
[attachment=3]
[attachment=4]
-
Aha, at lat it turns up...saw that RL at MK...tis beautiful :smitten:
-
8) First rays of sun to shot my RL20-II finally 100% done :D
That is a thing of beauty :4_17_5: :smitten:
-
wow! "wantit" game changer alert! :daumenhoch:
I never new these bikes were so expensive to build til I was interested in them? seen a few crackers on here of late fistblump
-
I’ll humbly enter my first Rad BOTM with my 1982 Diamondback Silverstreak.
Frame and forks - 1982 Koizumi made Diamondback Silverstreak
Bars - Diamondback stamped medium.
Stem - Diamondback stamped Sugino.
Headset - Tange MX.
Crank - Diamondback stamped Sugino 3pc.
Pedals - MKS BM-10 footjaws.
Wheels - Araya 7x with Suzue hi flange hubs.
Tyres - Reissue comp II’s.
Brake - Nos Dia-compe 890, Dia compe tech 3 lever.
Grips - Nos Fuan F1’s
Seat - Nos Fuan Aero
Seat clamp - SR
Seat post - Nagaoka fluted
Decals and pads by Steven at Esemdesigns.
-
So a few months ago I was offered the chance to buy back the only frameset I ever regretted selling. I jumped at the chance to have her back in my small collection.
So here she is in her second version...
1982 Skyway TA Frame and Skyway forks (K001522)
RedLine 401 Cranks/Chainwheel with DD spindle
Tange BB & HS
Shimano DX Pedals
GT Pro Bars
Amé Bubble font grips
Tuf Neck Tiger Stamped Stem
Elina Seat
Suntour SeatClamp
Shimano DX Lever
MX1000 Caliper with Shimano blocks
Tuff 2 Looseball wheels
Zeronine Plate
Cali-lite Padset
New Comp 2 and Snakebelly for riding
Original CyclePro Snakebelly and Comp 2 for Show
-
So a few months ago I was offered the chance to buy back the only frameset I ever regretted selling. I jumped at the chance to have her back in my small collection.
So here she is in her second version...
1982 Skyway TA Frame and Skyway forks (K001522)
RedLine 401 Cranks/Chainwheel with DD spindle
Tange BB & HS
Shimano DX Pedals
GT Pro Bars
Amé Bubble font grips
Tuf Neck Tiger Stamped Stem
Elina Seat
Suntour SeatClamp
Shimano DX Lever
MX1000 Caliper with Shimano blocks
Tuff 2 Looseball wheels
Zeronine Plate
Cali-lite Padset
New Comp 2 and Snakebelly for riding
Original CyclePro Snakebelly and Comp 2 for Show
So a few months ago I was offered the chance to buy back the only frameset I ever regretted selling. I jumped at the chance to have her back in my small collection.
So here she is in her second version...
1982 Skyway TA Frame and Skyway forks (K001522)
RedLine 401 Cranks/Chainwheel with DD spindle
Tange BB & HS
Shimano DX Pedals
GT Pro Bars
Amé Bubble font grips
Tuf Neck Tiger Stamped Stem
Elina Seat
Suntour SeatClamp
Shimano DX Lever
MX1000 Caliper with Shimano blocks
Tuff 2 Looseball wheels
Zeronine Plate
Cali-lite Padset
New Comp 2 and Snakebelly for riding
Original CyclePro Snakebelly and Comp 2 for Show
wow I love it, it's got my vote.
-
Only 5 bikes . But WOW explosion.
Some real quality there :4_17_5:
This is gonna be a tough one :popcorn:
-
Here's number 6 fistblump
Time for some Mid School :angel:
Lenny Lentini's 1996 S&M Holmes Oversize with Pitchforks
S&M Race bars
Araya RB17 rims laced to Crupi hubs
Profile cranks
Profile Whippet chainwheel
Selle Italia seat
Jive grips
Primo Dirt Monster 1.75 / 1.95 tyres
Base Brooklyn pad set
Ron C headwrap ( used as cable wrap and brake lever cover )
Jive handle grips
FSA Pig headset
S&M pedals
Diatech Hombre w/ VG cable hanger - Dia Compe Tech77 locking lever
Primo Rod seatpost
VG seat clamp
Thanks y'all fistblump LET'S RIDE!
[attachment=4]
[attachment=2]
[attachment=3]
[attachment=1]
-
Nice that Ed 👍🏼
-
Nice that Ed 👍🏼
Whats with the seat angle...surely that cannot be comfortable?
-
Nice that Ed 👍🏼
Whats with the seat angle...surely that cannot be comfortable?
I think you're underestimating the capacity of Ed's bunghole :surprise:
-
I think you're underestimating the capacity of Ed's bunghole :surprise:
:bondage:
-
Nice that Ed 👍🏼
Whats with the seat angle...surely that cannot be comfortable?
Apart from the above...it's just a mid school thing, :daumenhoch:
-
Charlie don’t surf
Ed don’t sit
fistblump
There’s more to BMX than old school
-
Here's number 6 fistblump
Time for some Mid School :angel:
Lenny Lentini's 1996 S&M Holmes Oversize with Pitchforks
S&M Race bars
Araya RB17 rims laced to Crupi hubs
Profile cranks
Profile Whippet chainwheel
Selle Italia seat
Jive grips
Primo Dirt Monster 1.75 / 1.95 tyres
Base Brooklyn pad set
Ron C headwrap ( used as cable wrap and brake lever cover )
Jive handle grips
FSA Pig headset
S&M pedals
Diatech Hombre w/ VG cable hanger - Dia Compe Tech77 locking lever
Primo Rod seatpost
VG seat clamp
Thanks y'all fistblump LET'S RIDE!
[attachment=4]
[attachment=2]
[attachment=3]
[attachment=1]
"I love the smell of Napalm in the morning". explosion
-
Here's number 6 fistblump
Time for some Mid School :angel:
Lenny Lentini's 1996 S&M Holmes Oversize with Pitchforks
S&M Race bars
Araya RB17 rims laced to Crupi hubs
Profile cranks
Profile Whippet chainwheel
Selle Italia seat
Jive grips
Primo Dirt Monster 1.75 / 1.95 tyres
Base Brooklyn pad set
Ron C headwrap ( used as cable wrap and brake lever cover )
Jive handle grips
FSA Pig headset
S&M pedals
Diatech Hombre w/ VG cable hanger - Dia Compe Tech77 locking lever
Primo Rod seatpost
VG seat clamp
Thanks y'all fistblump LET'S RIDE!
[attachment=4]
[attachment=2]
[attachment=3]
[attachment=1]
"I love the smell of Napalm in the morning". explosion
Can’t see it mush?!
-
These are all great builds. fistblump
-
GT Pro Performer Eddie Fiola Flying Banana
1. 1984 GT Pro Performer Flying Banana
2. GT stamped Performer original bars
3. Tuff Neck Pro stem gold
4. Hatta MK-2 headset
5. AME duel rubber Grips
6. Dia Comp tech 3 84 dated levers gold
7. Dia Compe stamped Black 84 dated front & rear brake cables
8. Dia Compe 84 dated gold Mx 1000 front & rear gold Skyway finned brake pads
9. Reissue GT pads set
10. Tuf neck stamped gold seat clamp
11. 4130 GT stamped black layback seatpost
12. Kashimax 84 dated Aero Seat with KSM Allan key seat guts
13. Redline 175 full wraps single pinch 401
14. Redline dimple loose ball bottom bracket
15. Shimano DX 9/16 gold Pedals
16. Tuf neck Power Disc gold
17. Tuf neck 43T machined edge gold chainwheel
18. Izumi stamped gold chain
19. Skyway tuff 2 with shimano chainwheel
20. GT stamped Gt winged logo tyres
21. GT stamped frame standers
Build thread here
http://www.radbmx.co.uk/forum/index.php'topic=194319.msg1946819#msg1946819
[attachment=1]
(https://i.ibb.co/7tkN9p0/4-A0743-D3-314-D-4300-AD45-286-FE9550593.jpg) (https://ibb.co/XxYkw5G)
(https://i.ibb.co/D7FgSX4/6-CF7-C566-C7-D6-4-C2-A-82-A2-770-DF8-D6-E69-B.jpg) (https://ibb.co/WcXpY9n)
(https://i.ibb.co/dfpsRhq/9-E98-BB0-E-6-CB4-4-D1-C-B739-C5-DAA101-EB0-E.jpg) (https://ibb.co/yNkmr31)
-
Well I’ll go to the foot of our fooking stairs "wantit"
-
New bikes dont have brakes, so the seat angled up like that allows them to create drag to stop, the ones that sit down are known as drag queens.
-
New bikes dont have brakes, so the seat angled up like that allows them to create drag to stop, the ones that sit down are known as drag queens.
;D ;D ;D
Finally someone who knows their beans :daumenhoch:
-
This Should be interesting :4_17_5:
I'll try and set the voting up tomorrow . If not it will be Wednesday next week as i'm away :whistle:
-
New bikes dont have brakes, so the seat angled up like that allows them to create drag to stop, the ones that sit down are known as drag queens.
I assume that is made up....I can guarantee you a 47 year old in mid life crisis will create plenty of drag with the seat in its normal (one you can actually sit on) postion. :LolLolLolLol:
-
Stand up or sit down your buggered either way..
(https://i.imgur.com/nn3kwzb.gif)
Seriously i couldnt believe how much drag a number plate added to my bike as a kid, thought it had broken lol, took 1/4 off the getin a move on speed and a whoppin 1/3 off the top speed, felt like a i was dragging a dead horse, i only put it on to pose local after that ;D
-
Stand up or sit down your buggered either way..
(https://i.imgur.com/nn3kwzb.gif)
Seriously i couldnt believe how much drag a number plate added to my bike as a kid, thought it had broken lol, took 1/4 off the getin a move on speed and a whoppin 1/3 off the top speed, felt like a i was dragging a dead horse, i only put it on to pose local after that ;D
I never had a plate but those bloody wheel disks used to blow you about in a cross wind.
I need a unicorn like that fistblump
-
I never had a plate but those bloody wheel disks used to blow you about in a cross wind.
I need a unicorn like that fistblump
Ikr i had em on for a morning nearly killed me hahaa! sold em to a kid i never saw again :whistle:
Did you know Turbo Kid had a short story prequel about Apples past? i only found out a few days ago! ;D