RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: daz bmx it! on March 26, 2009, 04:53 PM
-
Can anybody tell me why it wont strip the paint off my alloy chainwheel? It is a chainwheel I painted myself and a brand new tin of nitromors isn't touching it! :rant:
-
mabye you need to mature the nitromors a bit, i did some dx's last week with some very old nitromors that was a kind of diarrhoea colour and it fetched the anodize and the overpaint off a treat..... ;D
or mix it with some poop..
-
Mmm? some good answers there...not! >:( so whats the alternative then? cos this costs nearly £5 a tin and its sh*t! I'm gonna write to em and tell em! :2gunsfiring_v1:
-
Nitromorse really struggled with a lavender GT post I stripped a while back.
Is it defo painted and not powder coated?
-
Painted by a rattle can? ??? I've tried it on powder coat and its a no anyways? btw what do you use on powder coat to strip it?
-
or put it in a clear plastic bag cover ring with mors and seal bag
i stripped a frame this way that was powder coated and that worked a treat
-
Im not much help either, this is the aerospace paint stripper we use at work-Dasic D23V
http://www.dasicinter.com/dasic_aircraft_rem.htm (http://www.dasicinter.com/dasic_aircraft_rem.htm)
Good sh1t, will strip just about any paint in a few seconds.
-
i must admit a few years ago it use to take anything off , but now it seams to take much longer to even get it bubbling , where it uses to bubble so bad the brush it was put on with would get gumed up just putting it on
-
I just did a set of cranks and a brake caliper, both of them were powdered and after leaving for about 45mins I used a green scourer and it came off no problems and with no effort. I used a paintstripper similar to nitromors but a spanish equivalent and no probs.
Maybe your not leaving the nitromors on for long enough mate that's all I can think of.
Steve.
-
and have you got the green tin and not interior stuff as the latter is poop
-
Gasket remover is king, f*ckin stuff is lethal.
-
I love Nitromors :smitten:
-
all paint's bond to metal differantly, most powders should bubble and come off easy, two packs can break into small
parts and only a good wire brush will get them off, aerosols usually come off straight away, now nitromors is crap these days,
with health and safety all the guts has been taken out so now it's a mild stripper, gascket remover only works on certain
paints, mainly one coat powder finishes :) i use a gell strip from any car paint supplies, this shit removes anything :daumenhoch:
-
Nitromorse really struggled with a lavender GT post I stripped a while back.
Inspectormorse would have sussed it :daumenhoch:
-
. I used a paintstripper similar to nitromors but a spanish equivalent and no probs.
El Nitromorsio schorchio :D