Author Topic: 1991 Haro Master finished at last (Read 3135 times)

WINI · « **on:** January 06, 2012, 03:06 PM »

As I'm in the mood for photos, here is my 91 Master finally finished (well, 99% anyway)

Got the F&F a while ago now (cheers Lee), and built with riding rather than catalogue correctness in mind

Parts list as follows:

1991 Haro Master frame & forks
Haro Kneesaver bars
Primo rims laced to Oddy Pro hubs
Twin pinch flites
Fusion pedals
Fusion stem
Fusion disc
ACS Boa calipers / Tech 77 levers
Xposure Chas n Dave tyres
Haro grips
Haro seat & post
Fusion clamp

Oddy gyro

pickle · « **Reply #1 on:** January 06, 2012, 03:17 PM »

Looks great, but I have to ask. Why not use the AD990 mounts on the rear end instead of a caliber brake?

WINI · « **Reply #2 on:** January 06, 2012, 03:20 PM »

Quote from: pickle on January 06, 2012, 03:17 PM

Looks great, but I have to ask. Why not use the AD990 mounts on the rear end instead of a caliber brake?

I did originally mate, but was unhappy on how it was working (maybe the cables needed lubing). Still got an AD990 so might swap back and try to get the thing working properly

brettypeeps · « **Reply #3 on:** January 06, 2012, 03:24 PM »

Very Nice indeed now both the Wheels are on there

Discostu · « **Reply #4 on:** January 06, 2012, 03:25 PM »

nice bike

im also wondering about the ad990 mounts. a u brake will work much better once its dialled in correctly. you just need to lube up every part of the gyro cables in wd40. and grease the brake posts. tension up the ad990 springs then your away.

Robbo · « **Reply #5 on:** January 06, 2012, 03:36 PM »

Nice one Mark, this frame has seen a few owners on this website but its looking as good as ever!!

sparkysx · « **Reply #6 on:** January 06, 2012, 03:39 PM »

Smart, one of my favorite bikes.

pickle · « **Reply #7 on:** January 06, 2012, 05:57 PM »

It was tricky to set up when I had that frame but got it in the end

Clean · « **Reply #8 on:** January 06, 2012, 06:06 PM »

ED209 · « **Reply #9 on:** January 06, 2012, 06:17 PM »

Absoluteness luSHHHly... I'd LOVE that bike

Is that my ol seat? can I have it back?

turn your front wheel round though eh

I've got a shorter upper gyro cable if you want it.
...and get some decent tyres FFS.

CMC ( cnuts making comments

)

WINI · « **Reply #10 on:** January 06, 2012, 06:40 PM »

Quote from: ED209º on January 06, 2012, 06:17 PM

Absoluteness luSHHHly... I'd LOVE that bike

Is that my ol seat? can I have it back?
turn your front wheel round though eh
I've got a shorter upper gyro cable if you want it.
...and get some decent tyres FFS.

CMC ( cnuts making comments )

Yes it's your old seat mate, no you can't have it back, oops just noticed the front wheel, and I think I might have a shorter cable somewhere!

Oh, and no I like em!

Discostu · « **Reply #11 on:** January 06, 2012, 06:48 PM »

I think the cable will look alright if you put them both under the cross bar. That's how I have always fitted them.

Jaymz · « **Reply #12 on:** January 06, 2012, 06:52 PM »

looking sweet bud.are those my old pads on there!!!! squeaky foookers

rollin72 · « **Reply #13 on:** January 06, 2012, 07:01 PM »

nice1 Mark, that is a quality build right there

ED209 · « **Reply #14 on:** January 06, 2012, 07:01 PM »

Quote from: WINI on January 06, 2012, 06:40 PM

Quote from: ED209º on January 06, 2012, 06:17 PM
Absoluteness luSHHHly... I'd LOVE that bike

Is that my ol seat? can I have it back?
turn your front wheel round though eh
I've got a shorter upper gyro cable if you want it.
...and get some decent tyres FFS.

CMC ( cnuts making comments )

Yes it's your old seat mate, no you can't have it back, oops just noticed the front wheel, and I think I might have a shorter cable somewhere!

Oh, and no I like em!

Cheap heels never look nice on a sexy lookin fit bird.

Get some Manolo Blanik Primo VMonsters on her FFS

hunterdubber · « **Reply #15 on:** January 06, 2012, 07:12 PM »

Proper tidy that Mark

I'd like one of those framesets myself, oooo boootiful

energiza · « **Reply #16 on:** January 06, 2012, 09:33 PM »

i miss the ole gurl i do...good job there mark

WINI · « **Reply #17 on:** January 06, 2012, 10:35 PM »

Quote from: energiza on January 06, 2012, 09:33 PM

i miss the ole gurl i do...good job there mark

Cheers for the comments guys

Couple of tweeks and she'll be there, cmc taken on board

Darren KAP · « **Reply #18 on:** January 06, 2012, 10:37 PM »

Cheap heels never look nice on a sexy lookin fit bird.

[/quote]

You should see HunterDubber in his cheap heels

what a sight

By the way Mark that looks fookin mmmmmmmmmmmmmmmmmmm

first class mate

, give me a shout when you want that old frame off your wall

rad_pitt · « **Reply #19 on:** January 07, 2012, 01:49 AM »

Lovely stuff as per mate

rick1970 · « **Reply #20 on:** January 07, 2012, 07:47 AM »

Sweet freestyler that Mark

well done !!

sparkysx · « **Reply #21 on:** January 07, 2012, 10:47 AM »

Where does everyone keep finding these mint early 90's Haro's? Mega jealous, I want one!

WINI · « **Reply #22 on:** January 07, 2012, 10:53 AM »

Quote from: Jaymz on January 06, 2012, 06:52 PM

looking sweet bud.are those my old pads on there!!!! squeaky foookers

Ha! Yes they are J, the green/blue ones match the decals perfectly! Just need another set for the rear

gary4130 · « **Reply #23 on:** January 07, 2012, 10:33 PM »

nicley done mate

if anybody has one of those framesets pm me

Author Topic: 1991 Haro Master finished at last (Read 3135 times)

Clean

energiza

rad_pitt