Author Topic: ACE racing frame and forks (Read 2255 times)

58 delray · « **on:** December 06, 2012, 04:59 PM »

Now as some of you know i am fortunate enough to have what is belived to be the only known surviving ACE racing frame and forks

now the idea was to build it as a Cav Strutt replica but i have realised i have a slight problem..... in the picture i have of Cav riding an ACE he is not using the forks that were later sold with the frames, trouble is i dont know what he is using !! so this is where i want some help, can anyone identify the forks on Cav's bike ?
even better, does anyone have any contact details for Cav?

meticulous · « **Reply #1 on:** December 06, 2012, 05:38 PM »

think your gona struggle there andy with that picture anyhow, could be any number of forks, do you not have other pictures?

58 delray · « **Reply #2 on:** December 06, 2012, 05:46 PM »

thats the best pic i have sam, everything else is distant stuff and black and white aswell !! take a look here and see if you can make anything out....

http://www.radbmx.co.uk/forum/index.php'topic=61968.0

CD17 · « **Reply #3 on:** December 06, 2012, 06:55 PM »

What year was it from

that will narrow it down a bit, my 1st guess would be GT, but the bend looks to rounded, so maybe Robinson $:-\$

58 delray · « **Reply #4 on:** December 06, 2012, 07:04 PM »

Quote from: wish id kept my TA on December 06, 2012, 06:55 PM

What year was it from that will narrow it down a bit, my 1st guess would be GT, but the bend looks to rounded, so maybe Robinson $:-\$

81 mate

meticulous · « **Reply #5 on:** December 06, 2012, 07:05 PM »

defo not robbo forks, robbo forks have much rounder shoulders, what about some sort of tange?

it will be all guess work unless somebody definately knows... $:-\$

meticulous · « **Reply #6 on:** December 06, 2012, 07:07 PM »

the frame looks very robinson though...

58 delray · « **Reply #7 on:** December 06, 2012, 07:09 PM »

Quote from: meticulous on December 06, 2012, 07:07 PM

the frame looks very robinson though...

it was based on a cook bros sam, the rear end is almost identical

Peter J · « **Reply #8 on:** December 06, 2012, 07:19 PM »

Look a bit Hutch

But the bottom on the fork legs looks flat cut

Its just the location of the plate at the bottom of the legs looks in the same position

Or Patty

http://bmxmuseum.com/forums/viewtopic.php?id=272806

dan-dare · « **Reply #9 on:** December 06, 2012, 07:26 PM »

mongoose

58 delray · « **Reply #10 on:** December 06, 2012, 07:26 PM »

Quote from: Peter J on December 06, 2012, 07:19 PM

Look a bit Hutch

But the bottom on the fork legs looks flat cut

Its just the location of the plate at the bottom of the legs looks in the same position

Or Patty

http://bmxmuseum.com/forums/viewtopic.php?id=272806

not patty as the dropouts are below the main part of the leg and the wrong shape for hutch $:-\$

58 delray · « **Reply #11 on:** December 06, 2012, 07:27 PM »

Quote from: dan-dare on December 06, 2012, 07:26 PM

mongoose

if you mean supergoose then i would say the legs look to fat for that $:-\$

Peter J · « **Reply #12 on:** December 06, 2012, 07:30 PM »

http://www.radbmx.co.uk/forum/index.php'topic=116143.0

$:-\$

58 delray · « **Reply #13 on:** December 06, 2012, 07:37 PM »

Quote from: Peter J on December 06, 2012, 07:30 PM

http://www.radbmx.co.uk/forum/index.php'topic=116143.0

$:-\$

i think they were too late tbh as i dont remember them being around in 81 but closer in looks mate

RATTY · « **Reply #14 on:** December 06, 2012, 07:51 PM »

Richard Barrington had the frames built in the far East, I remember them being wall to wall in the shop when they arrived. I would think that someone like Akisu would have been the builder, so it would make sense that they were Akisu forks. Possibly slightly different, depending on the spec at the time.

oldschoolace · « **Reply #15 on:** December 06, 2012, 08:06 PM »

Cant help on the forks but if you are stuck for the bars and dont mind copies the rapid transit bars may do the trick

http://www.ebay.co.uk/itm/New-Als-Rapid-Transit-Cook-CBR-Style-BMX-Bars-Handlebars-CHROME-Plated-Knurled-/261090547770?pt=Cycling_Parts_Accessories&hash=item3cca35983a

58 delray · « **Reply #16 on:** December 06, 2012, 08:12 PM »

Quote from: oldschoolace on December 06, 2012, 08:06 PM

Cant help on the forks but if you are stuck for the bars and dont mind copies the rapid transit bars may do the trick

http://www.ebay.co.uk/itm/New-Als-Rapid-Transit-Cook-CBR-Style-BMX-Bars-Handlebars-CHROME-Plated-Knurled-/261090547770?pt=Cycling_Parts_Accessories&hash=item3cca35983a

thanks but i have some cook bros bars

dp and Chopper Dude · « **Reply #17 on:** December 06, 2012, 08:15 PM »

The look a bit like the ones on this 78 team Rampar?

I found them on this thread: http://www.radbmx.co.uk/forum/index.php'topic=68.msg1526619;boardseen#new If it's any help??

58 delray · « **Reply #18 on:** December 06, 2012, 08:48 PM »

Quote from: RATTY on December 06, 2012, 07:51 PM

Richard Barrington had the frames built in the far East, I remember them being wall to wall in the shop when they arrived. I would think that someone like Akisu would have been the builder, so it would make sense that they were Akisu forks. Possibly slightly different, depending on the spec at the time.

are you sure about where they were built tone ? only reason i say that is that they are brazzed not welded ?

RATTY · « **Reply #19 on:** December 06, 2012, 09:00 PM »

Im not sure Andy, but Richard would have got them built by someone like that. The exchange rate to the US back then was really bad, so Im sure it wasnt a US firm, very likely a far east set up.

58 delray · « **Reply #20 on:** December 06, 2012, 10:04 PM »

Quote from: RATTY on December 06, 2012, 09:00 PM

Im not sure Andy, but Richard would have got them built by someone like that. The exchange rate to the US back then was really bad, so Im sure it wasnt a US firm, very likely a far east set up.

ok mate.. i just thought they were UK built....................

Andy68 · « **Reply #21 on:** December 07, 2012, 02:06 PM »

I'm prob wrong but here goes anyway....... I'm sure I've some early pics somewhere of a young Pete Middleton riding for Ace. Would it have been the same model??

58 delray · « **Reply #22 on:** December 07, 2012, 03:08 PM »

Quote from: Andy68 on December 07, 2012, 02:06 PM

I'm prob wrong but here goes anyway....... I'm sure I've some early pics somewhere of a young Pete Middleton riding for Ace. Would it have been the same model??

pete was probably on a goose but i would interested to see them all the same

Andy68 · « **Reply #23 on:** December 07, 2012, 03:12 PM »

I'll have a dig round this weekend for ya.

58 delray · « **Reply #24 on:** December 07, 2012, 03:15 PM »

Quote from: Andy68 on December 07, 2012, 03:12 PM

I'll have a dig round this weekend for ya.

nice one

Author Topic: ACE racing frame and forks (Read 2255 times)

dan-dare

dp and Chopper Dude