Author Topic: February Bike Of The Month VOTE OFF!! (Read 20418 times)

Gashead · « **on:** February 08, 2015, 09:09 AM »

Usual rules apply, 4 pics max

griff · « **Reply #1 on:** February 08, 2015, 11:31 AM »

In case anyone's forgotten the rules, here they are again

1. Maximum of 4 pictures, list parts if you feel like it or any history to the build
2. Bike should've been completed within a month of entry
3. Entry to BOTM will close at the end of every calender month
4. Voting will open as close to 1st of the next month as we can get and will run for 7 days
5. If we have joint winners then we will run a 3 day vote off for the outright winner
6. Each months winner will go into the BOTY vote off

nitrohopper · « **Reply #2 on:** February 08, 2015, 11:51 AM »

I will start it with my wife's torker 280 air

1985 torker 280 air frame and forks
First generation Skyway ez bars
Acs slant stem acs rotor
Mushroom 2 grips
Dia compe tech 4 levers dia compe cables dia compe 880
Araya 7x suzie hubs Barefoot tyres
Sugino opc crank Sugino chain ring tuff neck power disc
Sr seat post Suntour clamp Elina flight tech seat
Vp300 for now
I would also like to say a very big thanks to sbd dan for a stunning powder job
And del for some excellent decals

chrisgarbs · « **Reply #3 on:** February 09, 2015, 09:52 PM »

Hi. I've only been back into bmx bikes after a 27 year gap. This is my 1st ever build from scratch. It's a Diamond Back Assult 1990. I have put a number plate on for my Charity ride out (Bham Sands Ride). It has a DB stem and OPC. Blue Panaracer tyres, DIA Compe brake lever and calliper, porkchop chainring, bmx works pedals, Ame grips, Sugino spider and bolts, Skyway tuff 2 wheels, Landar locking nut, Line 2000 seat and a DIA compe seat clamp.Paint job by Paul Jackson thanks Paul. I know most parts are not original but I just wanted to build a nice looking bike for my first build. I hope you like it and thanks for looking. Chris...No idea why my pictures are upside down sorry

That Swan Guy · « **Reply #4 on:** February 14, 2015, 01:58 PM »

Go on then since it's Valentine's Day and I

this bike

GT Pro World Tour

After the faff of finding a green GT seat for the 'other one' I thought I would start with a seat this time. I refer you to this thread:

http://www.radbmx.co.uk/forum/index.php/topic,179406.0.html

Anyhow, here it is:

Quick run down:

GT F&F
GT bars
GT stem
GT seat post
GT seat
GT seat clamp
GT frame stander
GT pads
GT tyres
7x on Suzue
Sugino crank carrying Tuf Neck, CAM & SR pedals
Bear Trap II
Oakley
DC 880 on Tech 6 locking
Izumi

Retrodan72 · « **Reply #5 on:** February 14, 2015, 04:38 PM »

I'll throw this in, it's a bike I've had for about 4 years, but today it's had a strip down, clean, regrease and rebuild - with some new parts added.

1984 Mongoose Supergoose 3 (Ammaco UK model)

Mongoose/Ammaco frame and forks (survivor)
Mongoose stamped headset (survivor)
OG SR MS-422 stem (survivor)
Renthal bars (survivor)
used A'me Duals
Mongoose Pro Class rims (survivor)
Suzue LF hubs (survivor)
Asahi spokes
Mongoose stamped 28tpi BB (survivor)
Mongoose stamped 1 piece crank (survivor)
Mongoose stamped spider (survivor)
SR pedals
DC hinged MX seat clamp
Kashi Aero
Renthal seat post (survivor)
DC MX900 caliper (survivor)
DC Tech 3 lever (survivor)
Repop pad set
Scotty's valve caps.

All parts labelled survivor are original, as from the factory that came fitted to this bike - just cleaned.

The stem base and chainring are too original, just given the SBD treatment, as they were so bad.

The replaced parts were done so as the OG ones were beyond repair.

Twesnik · « **Reply #6 on:** February 15, 2015, 08:23 AM »

GT Pro 5 Digit Serial Santa Ana.
Parts list:
'82 GT F&F.
GT Pro Bars unknurled.
GT Padset.
Haro Flow Panel.
GT Seatpost.
Kashimax MX Seat.
DC Hinched Clamp.
Oakley B1B.
Tange Seikie 303 & Tange Headlock & BS SST Dirt-Skirt.
Square Tiger Stem.
Dia Compe MX-1000 & DC Tech III Lever & Koolstop Brakepads & Teflon Cable.
Profile 182mm 3rd Gen Cranks & PPP Chairing & Profile Sealed BB & Hutch Pro Peds & Urchin Cages & Izumi Chain.
Araya 7x & Bullseye Hubs & SunTour Freewheel & Swallow 20x1.75 Tires & Tioga Drop-out Savers.

benno · « **Reply #7 on:** February 15, 2015, 07:29 PM »

built this little beauty up today , probably gonna be my rider hence the re pop saddle ,grips and pedals and i'll probably end up swapping the Panas for some kenda k55's

spec
1985 Haro FST f&f neon red survivor paint and decals
Anlun Bars
Tuf neck stem
Ukai Speedlines
Panaracer freestyle tyres
Sugino opc with pro neck chain ring
victor pedals
MX1000's with tech 4's & DC cables
DC seat clamp, nitto layback , re-pop Kashi

Jaan · « **Reply #8 on:** February 17, 2015, 12:18 PM »

Hutch Pro Racer

All date stamped parts match the frame set. No JDB.

Hutch PR f/f
Hutch bars
Hutch grips
Hutch Western H stem
Hutch 2 in 1 headset lock
LP125 headset
Chrome Tech 3 / DC rear / chrome MX1000 / Skyway Pro Pads
Hutch seat post clamp
Hutch seat post
Kashimax Aero
Hutch pad set
Redline 401s / Redline 43T chainwheel / Tange BB
DID chain
Hutch bear traps
Pro Class wheels laced to Bullseye hubs
Cheng Shin tyres
Veltman RadKaps

CustardLips · « **Reply #9 on:** February 17, 2015, 05:44 PM »

1992 Elf Doublecross

Elf f&f
Elf Blast bars
Jive handles
GT dimple stem
Generic headset
Odyssey Svelte seat
GT seat post
GT seat clamp
Profile cranks
Profile Ripsaw
Primo pedals
Sun Levanter rims on GT hubs
Primo Dirtmonsters
Dia Compe big dog caliper
Dia Compe mx99 lever
Generic cable

Jono · « **Reply #10 on:** February 18, 2015, 03:55 PM »

My JC built Stu Thomsen STR-1 Prototype

Race inc bars with oury grips
takagi mx crank
gen 1 70's addicks spider, bolts and nylon chainring
goose gold stem (although believe i need a cebe slimline)
mongoose stamped headset
tange bb
araya 7bs with sunshine front and shimano coaster rear hubs on cheng shin and carlisle aggressor mx tyres
uni hammerhead seat
moody pl-1 (ish) seat clamp

Monk_Wally_Honk · « **Reply #11 on:** February 24, 2015, 09:13 AM »

Not expecting any votes but good to keep the numbers up....

Bought the frame after a deal on the museum for a knackered Street Styler F&F fell through. This one went round a few times on ebay with no buys so offered low and won. Turned out to be from September '85 which must be one of the earliest around. Remember them coming out and liking the bent forks and the chunky looking tubing. Was expecting to give it the full bath and polish treatment or send it to SBD for powder but a quick rub with an oily rag and I loved the survivor look, hardly any rust anywhere. Most of the rest has come from people here.

F&F - Dyno Compe D-30 (survivor)
GT Freestyle Bars
Ame Cams
Dyno polished stem
New Tuff II with Kool Kaps
1pc, Victor Pedals PPP Chainring & Disc
GT laidback seatpost and Dyno seat
Rightwayup headset
Cheap copy brakes.

factory pilot · « **Reply #12 on:** February 24, 2015, 12:20 PM »

After a slow start this month has really taken off .... Glad I'm holding fire with my builds !

Honourable mentions so far to Dan Jackson, Nick Swannick, Nick Custardlips, Benno and Chris (Jaan) and Ali ( Jono ) .....
its gonna be a hard one for me to choose this month...

nitrohopper · « **Reply #13 on:** March 02, 2015, 08:56 PM »

Hey guys are we voting then..?

CustardLips · « **Reply #14 on:** March 02, 2015, 09:02 PM »

Quote from: nitrohopper on March 02, 2015, 08:56 PM

Hey guys are we voting then..?

Been thinking the same.

Retrodan72 · « **Reply #15 on:** March 02, 2015, 09:05 PM »

Quote from: CustardLips on March 02, 2015, 09:02 PM

Quote from: nitrohopper on March 02, 2015, 08:56 PM
Hey guys are we voting then..?
Been thinking the same.

Lazy RADmins.

CustardLips · « **Reply #16 on:** March 02, 2015, 09:15 PM »

Quote from: Retrodan72 on March 02, 2015, 09:05 PM

Quote from: CustardLips on March 02, 2015, 09:02 PM
Quote from: nitrohopper on March 02, 2015, 08:56 PM
Hey guys are we voting then..?
Been thinking the same.

Lazy RADmins.

This sort of thing wouldn't have happened in your day would it Dan.

pickle · « **Reply #17 on:** March 03, 2015, 07:53 AM »

Voting now open ya Slaaaaaaaaaaaaaaaaaags

Retrodan72 · « **Reply #18 on:** March 03, 2015, 07:56 AM »

Voted, well done lads.

pickle · « **Reply #19 on:** March 03, 2015, 07:59 AM »

sorry for the delay, i completely forgot

insectbones · « **Reply #20 on:** March 03, 2015, 08:08 AM »

Voted

pickle · « **Reply #21 on:** March 03, 2015, 08:12 AM »

Put mine in.......always go for the one i'd like to have myself.

In2bmx · « **Reply #22 on:** March 03, 2015, 08:36 AM »

Voted

Pooch · « **Reply #23 on:** March 03, 2015, 08:39 AM »

Done..😁

dancetothedrummersbeat · « **Reply #24 on:** March 03, 2015, 08:42 AM »

Vote in. Another cracking month of builds

Author Topic: February Bike Of The Month VOTE OFF!! (Read 20418 times)

griff

In2bmx