Author Topic: 1984 Mike Dominguez Oldest Haro Gen 1 Sport now Finished (Read 114578 times)

Ady · « **on:** April 22, 2016, 06:22 PM »

To keep the ball rolling on this great forum as Deeman amazing build..
I have haro gen 1 sport the oldest to date on the haro registry.
I got this from Raddad on here (great knowledgable guy) late last year.
I have been doing lots of research getting the correct parts for this very early sport and finally ready to share the progress of this build.(many thanks too stubill )
I have always wanted one when watching the Kellogg`s series BMX in `84..
Rushing home from school to watch or programming the old ferguson video star vhs to record if out..

/>Or..

/>I have lost count the times I have watch this and paused it to get ideas.(cheers Danny)
I have now got most of the bits for now to complete this build but the haro vectors I have need a refurb and planning on doing this weekend.
Here are a few pics of the frame as I had it off Jim...
It has a few marks on the drop outs which I like to be honest.
I like the patina and imagine Mike D rode it over tightening the wheels after a session at the Kellogg`s event ...
Well here is a few pics of the frame before paint .
And what it will look like when done ..
All the best..

Ady · « **Reply #1 on:** April 22, 2016, 07:33 PM »

and these puppies..

factory pilot · « **Reply #2 on:** April 22, 2016, 07:43 PM »

This is going to be epic mate .. Really looking forward to seeing this thread develop!

Deeman's and now yours ... Year of the Haro thread on Rad!

kjilaja · « **Reply #3 on:** April 22, 2016, 08:47 PM »

Quote from: Ady on April 22, 2016, 07:33 PM

and these puppies..

look forward to this build mate,really need a set of them graphites,been after some for ages now

Taipan · « **Reply #4 on:** April 22, 2016, 09:56 PM »

This is gonna be good

going for it on this one then Ady

deeman · « **Reply #5 on:** April 23, 2016, 01:55 AM »

Wow...thanks for the kind words Ady and Ant!

This is going to be a cracker too...I love a rider rep! no front brake keeps the costs down a bit!!

Look forward to following this one

Ady · « **Reply #6 on:** April 23, 2016, 09:11 PM »

Made a start on the vectors today.
They was pitted with rust and very poor and missing the stem bolt .
Bit of the old elbow grease again with great results..
Did this on a set of forks..
Chrome kit doesn't work so don't bother

http://www.radbmx.co.uk/forum/index.php/topic,186516.0.html
before.
[ Attachment: You are not allowed to view attachments ]

After..
[ Attachment: You are not allowed to view attachments ]
[ Attachment: You are not allowed to view attachments ]

The bolt and wedge is off a suntour power stem and fits perfect..
[ Attachment: You are not allowed to view attachments ]

Planning on refurbing these tomorrow ..

factory pilot · « **Reply #7 on:** April 23, 2016, 09:27 PM »

Looking sweet Ady!

Ady · « **Reply #8 on:** April 29, 2016, 07:41 PM »

Little update..
Finished the chainwheel today with some NOS bits to attach, inc the task force hollow design 1pc crank..
Black nos Tioga chainring bolts with nos tuf/pro neck 44t..

Had a issue with the Shimano DX refurb..
Doing the last coat of paint a bleeding fly landed and got caught up in the spray so got to rub it down and do them again..

Before..

Ady · « **Reply #9 on:** April 29, 2016, 07:47 PM »

Bit of advice..
Got a set of these graphite tuff`s dated 1984..
But

the Top riders had the silver graphite hubs not the gold..
I am in two minds what to do as it would be sacrilege personally to remove the gold..

radovr · « **Reply #10 on:** April 30, 2016, 06:19 AM »

What a fantastic piece of bmx history to own . Looks very nice there.
Good work on the bars they look stunning . All time favorite bars
there

Retrodan72 · « **Reply #11 on:** April 30, 2016, 07:21 AM »

Ady, it's only my opinion, but you have to keep those Tuffs as they are mate, they're awesome.

kjilaja · « **Reply #12 on:** April 30, 2016, 07:23 AM »

Quote from: Ady on April 29, 2016, 07:47 PM

Bit of advice..
Got a set of these graphite tuff`s dated 1984..
But the Top riders had the silver graphite hubs not the gold..
I am in two minds what to do as it would be sacrilege personally to remove the gold..

if you decide to move on the graphites mate,I'll defo have them

factory pilot · « **Reply #13 on:** April 30, 2016, 09:13 AM »

Keep it coming... This is very cool fella!

Banachek · « **Reply #14 on:** April 30, 2016, 09:39 AM »

Awesome project. I'd keep the Graphite's, your other alternative is to run a normal set of ally Tuffs, which IMO would water down the wow factor.
Can't wait to see more progress. Keep up the great work.

deeman · « **Reply #15 on:** April 30, 2016, 10:33 AM »

Quote from: Banachek on April 30, 2016, 09:39 AM

Awesome project. I'd keep the Graphite's, your other alternative is to run a normal set of ally Tuffs, which IMO would water down the wow factor.
Can't wait to see more progress. Keep up the great work.

^^^This !
chainring and spider look great Ady...keep it coming

Ady · « **Reply #16 on:** April 30, 2016, 08:18 PM »

Quote from: Banachek on April 30, 2016, 09:39 AM

Awesome project. I'd keep the Graphite's, your other alternative is to run a normal set of ally Tuffs, which IMO would water down the wow factor.
Can't wait to see more progress. Keep up the great work.

Quote from: kjilaja on April 30, 2016, 07:23 AM

Quote from: Ady on April 29, 2016, 07:47 PM
Bit of advice..
Got a set of these graphite tuff`s dated 1984..
But the Top riders had the silver graphite hubs not the gold..
I am in two minds what to do as it would be sacrilege personally to remove the gold..

if you decide to move on the graphites mate,I'll defo have them

Quote from: Retrodan72 on April 30, 2016, 07:21 AM

Ady, it's only my opinion, but you have to keep those Tuffs as they are mate, they're awesome.

Quote from: factory pilot on April 30, 2016, 09:13 AM

Keep it coming... This is very cool fella!

Quote from: radovr on April 30, 2016, 06:19 AM

What a fantastic piece of bmx history to own . Looks very nice there.
Good work on the bars they look stunning . All time favorite bars
there

Many thanks for your nice replies and help guys...

Going to leave the Campagnolo hubs as it is...
Just cannot do it and the missus who never gets involved with my kids bikes she calls it

said looks better looking in gold..
And as Banachek said.. going with the graphites on this build as it fully deserve the wow factor with its history and could agree more with what radovr quoted and going big time on this iconic sport..

Ady · « **Reply #17 on:** April 30, 2016, 08:36 PM »

Little update..
Stripped and polished all the little bits and re-assembled greased as to when the frame lands..
Managed to get a set of correct dated dia comp cables which landed last week..
Cheers guys..

Does anyone know what the date is of this seat ??

Ady · « **Reply #18 on:** May 01, 2016, 01:44 PM »

Bit gutted today..
Fitting the flywheel too the hub and found a bit of play on the rivets

I don`t know if anyone would know who could repair this problem..
I bought these ages ago for this build as well..(bloody ebay)
I have got a spare rear which I bought earlier this year in the hope a front graphite might pop up so will swap for now and luckily its dated the same..
Well the tyres landed from Aus with no fees..

and the faulty hub..

Taipan · « **Reply #19 on:** May 01, 2016, 05:32 PM »

Ady,someone on here had a tool for re-riveting the alloy hubs so they looked like they did bitd cant remember who it was but possibly Sawzal or maybe clint old school I'm sure someone will know tho

Ady · « **Reply #20 on:** May 01, 2016, 05:56 PM »

Quote from: Taipan on May 01, 2016, 05:32 PM

Ady,someone on here had a tool for re-riveting the alloy hubs so they looked like they did bitd cant remember who it was but possibly Sawzal or maybe clint old school I'm sure someone will know tho

Hi C...
thanks for that mate..

I will drop Sawzal and clint a message..

Ady · « **Reply #21 on:** May 04, 2016, 05:05 PM »

Frame back from the spray shop..
Well happy with the work .
Would have used SBD but..
I just don`t trust the postal service as they have lost in the past two frames inc a Haro 89 bash guard with parts..
I would be gutted this ultra rare frame just one of seven left now to be lost...

anyway..
A few pics to whet your appetite...

factory pilot · « **Reply #22 on:** May 04, 2016, 06:23 PM »

Looks sweet mate

Gnarlyscoots · « **Reply #23 on:** May 04, 2016, 06:37 PM »

Looking great Ady, and nice work by yourself

The seat is dated 1982, buddy.

Quote from: Ady on April 30, 2016, 08:36 PM

Does anyone know what the date is of this seat ??

oldschoolace · « **Reply #24 on:** May 04, 2016, 07:24 PM »

Some cracking freestyle builds on here at the mo and this is shaping up to be another