Author Topic: chroming (Read 3575 times)

mcnab916 · « **on:** January 25, 2006, 09:48 AM »

does anyone know if there is a chromers in the north west area ??

scary_leary · « **Reply #1 on:** January 25, 2006, 09:53 AM »

Leigh Metal Polishing Services Ltd
Harcourt Street
Worsley
Manchester
M28 3GN
Lancashire
Tel: 01204 861022

this is where i go......beautiful work

mcnab916 · « **Reply #2 on:** January 25, 2006, 09:56 AM »

nice one matey just called them and no probs, result

Frosty · « **Reply #3 on:** January 25, 2006, 09:58 AM »

Scary,

You got any before and after pics of their work and an idea of costs?

Just thinking it may be worth building up a database of trusted/good suppliers that we can send our valuables to!

Thanks

Paul

scary_leary · « **Reply #4 on:** January 25, 2006, 10:23 AM »

Heres some of there work..
Bare in mind this is chrome over alloy..
(very hard too polish before chroming, as u donâ€™t want the writing rubbing away)

This lot was Â£55

scary_leary · « **Reply #5 on:** January 25, 2006, 10:25 AM »

i dont have before pic's..but believe me they were shagged.

Frosty · « **Reply #6 on:** January 25, 2006, 10:31 AM »

Did they do the prep work aswell or did you have to spend hours rubbin'?

They look great. I have sent a set of crank arms and some manky brake calipers to the folks at Clevedon Chroming, once I get these back I'll compare with the stuff I had done at castleford Chrome and post pics etc. I may well send the next batch of bits to Leigh's.

oberonspacefruit · « **Reply #7 on:** January 25, 2006, 10:37 AM »

have you had a quote for f+f mr leary?

scary_leary · « **Reply #8 on:** January 25, 2006, 11:10 AM »

yeah they do all the prep..

never taken a f/f..but you will have too take parts in, they dont really quote over phone.

jezza off here and the burner forum has used them..and was well pleased.

i once took a set of steel pro class rims in for matt ..aka, mattgaybeat and was quoted £120

they said alot of work had too go into polishing around every little hole, so i reckon a f/f set should be around £150 maybe £120

oberonspacefruit · « **Reply #9 on:** January 25, 2006, 11:12 AM »

yeah, i have had problems with rims, they have to be carefull, otherwise the big polishers they use widen the spoke holes. thus it takes a lot more time, thus it cost a lot more.

mcnab916 · « **Reply #10 on:** January 25, 2006, 02:11 PM »

gonna take my f+f into leigh polishers 2moz if i ever get this stem out

oberonspacefruit · « **Reply #11 on:** January 25, 2006, 03:20 PM »

let me know how much they say.

oberonspacefruit · « **Reply #12 on:** January 25, 2006, 03:21 PM »

Quote from: mcnab916 on January 25, 2006, 02:11 PM

gonna take my f+f into leigh polishers 2moz if i ever get this stem out

have you tried hitting it with a big hammer?

mcnab916 · « **Reply #13 on:** January 25, 2006, 03:27 PM »

yeah but dont wanna knacker the it cause its a good genuine pro class one

Moose · « **Reply #14 on:** February 23, 2006, 08:27 PM »

Are you not going to post pictures if the work's bad then?

Do you know the cost yet?

mcnab916 · « **Reply #15 on:** February 24, 2006, 02:09 PM »

TRYING TO POST PICTURES OF THE FRAME AND FORKS BUT ITS SAYING UPLOAD FOLDER IS FULL? IM AS CRAP ON A COMPUTER AS I AM ON A BMX,

ANY IDEAS FELLAS

ORB · « **Reply #16 on:** February 24, 2006, 02:19 PM »

www.photobucket.com

mcnab916 · « **Reply #17 on:** February 24, 2006, 02:47 PM »

SORRY ORB, ITS ALL DOUBLE DUTCH TO ME,

mcnab916 · « **Reply #18 on:** February 24, 2006, 04:23 PM »

NO GOOD, STILL CANT SEND THE FOOKIN PICTURES, TOO DAMN COMPLECATED FOR ME, ANYWAY FRAME, FOFKS AND BARS COST £170, 10/10, TOP JOB,

rad dad · « **Reply #19 on:** February 24, 2006, 09:10 PM »

had a frame fork and bars done at cas chromers for Â£60

mcnab916 · « **Reply #20 on:** February 24, 2006, 09:19 PM »

B*LL*CKS, IVE BEEN STUNG AGAIN

mcnab916 · « **Reply #21 on:** February 24, 2006, 09:20 PM »

WHERE ABOUTS ARE THEY

rad dad · « **Reply #22 on:** February 24, 2006, 10:31 PM »

castleford, west yorkshire, not far from me....they do a top job but havent got a rush inem

i would deffo use again if need be

Mattdub · « **Reply #23 on:** February 24, 2006, 11:22 PM »

Rad Dad ,

that stuff looks good , are there any blemishes or shitty bits ?. I need show chrome ?.

Matt

scary_leary · « **Reply #24 on:** February 25, 2006, 01:42 AM »

Heres Andys pro class..Looking real good

Author Topic: chroming (Read 3575 times)

mcnab916

scary_leary

mcnab916

Frosty

scary_leary

scary_leary

Frosty

scary_leary

mcnab916

mcnab916

mcnab916

mcnab916

mcnab916

rad dad

mcnab916

mcnab916

rad dad

scary_leary