Author Topic: Today I bought, or it got delivered, or I fitted... (Read 553221 times)

Jaan · « **Reply #1925 on:** April 02, 2014, 09:35 AM »

Quote from: Jono on April 01, 2014, 08:32 PM

Quote from: laidback on April 01, 2014, 08:20 PM
Open Plan crapper, and a table and chair opposite so your mates can drink beer and talk BMX to you whilst you're laying down a Nightwatchman

as you can see from decals it was recently used by the council as a kitchen, bathroom showroom for tenants so although all there not plumbed in yet so obviously bath going gunna need a serious water tank to run a bath so shower tray n partition wall there

Drink enough beer and you'll forget about the lack of plumbing

WINI · « **Reply #1926 on:** April 02, 2014, 09:41 AM »

Picked up some bits from a top bloke down here.

The smoothest set of wheels I've ever owned

And something to put 'em on

Gashead · « **Reply #1927 on:** April 02, 2014, 04:47 PM »

If you look hard enough they are out there !

24 x 1.75 7x's

Pooch · « **Reply #1928 on:** April 04, 2014, 09:39 PM »

Set of NOS 24x175 rainbow labels.. Not NOS for long..

AKGOFF · « **Reply #1929 on:** April 05, 2014, 12:15 PM »

This is possibly the earliest known non Looptail Quadangle out there. One of around 50 made using 4130 tubing left over from the Looptail frames before they started using 531 Reynolds tubing and of that 50 less than 15 are known to exist. This is a November 1982 frame and the 10th non Looptail Quadangle ever made.

The dropouts have had zero work done except paint stripping, it looks NOS (but isn't).

After Dan worked his magic yesterday.

And a few bits I picked up from the Chromers:
VDC Expert Monkey Bars, rare Vector VC8 bars, Bottema Skatepark forks and 1st Gen Bullseye cranks:

Oh and these:

Jaan · « **Reply #1930 on:** April 05, 2014, 12:21 PM »

I need to throw out my dictionary, the definition of "Retired" is completely wrong.

AKGOFF · « **Reply #1931 on:** April 05, 2014, 12:32 PM »

Quote from: Jaan on April 05, 2014, 12:21 PM

I need to throw out my dictionary, the definition of "Retired" is completely wrong.

This is it, last build.

Julian347 · « **Reply #1932 on:** April 05, 2014, 12:38 PM »

Quote from: AKGOFF on April 05, 2014, 12:15 PM

This is possibly the earliest known non Looptail Quadangle out there. One of around 50 made using 4130 tubing left over from the Looptail frames before they started using 531 Reynolds tubing and of that 50 less than 15 are known to exist. This is a November 1982 frame and the 10th non Looptail Quadangle ever made.
The dropouts have had zero work done except paint stripping, it looks NOS (but isn't).

After Dan worked his magic yesterday.

And a few bits I picked up from the Chromers:
VDC Expert Monkey Bars, rare Vector VC8 bars, Bottema Skatepark forks and 1st Gen Bullseye cranks:

Oh and these:

Looking forward to seeing this one Adam

WINI · « **Reply #1933 on:** April 05, 2014, 12:58 PM »

Put some effort in Adam, your builds are always so half arsed.....

Jaan · « **Reply #1934 on:** April 05, 2014, 08:35 PM »

I'm usually not a snob but Adam is such a skinflint

dannyrobo · « **Reply #1935 on:** April 06, 2014, 02:01 AM »

today i got delivered 33 sets of nos wheels to build

glenboy · « **Reply #1936 on:** April 06, 2014, 02:38 AM »

Lol you certainly do have the addiction Danny , some nice zed dies there

Jaan · « **Reply #1937 on:** April 06, 2014, 08:51 AM »

Quote from: dannyrobo on April 06, 2014, 02:01 AM

today i got delivered 33 sets of nos wheels to build

dannyrobo · « **Reply #1938 on:** April 06, 2014, 09:07 AM »

Quote from: glenboy on April 06, 2014, 02:38 AM

Lol you certainly do have the addiction Danny , some nice zed dies there

i just love lacing them, i do quite a few peoples now but i think ive took on to many this time

Jaan · « **Reply #1939 on:** April 06, 2014, 09:13 AM »

So it isn't a monster purchase Danny? How many potential dibbs PMs have you received?

dannyrobo · « **Reply #1940 on:** April 06, 2014, 01:30 PM »

ive not had any $:-\$ no there not mine,wish they was, i just offered to build them

glenboy · « **Reply #1941 on:** April 06, 2014, 01:45 PM »

😄 it's like that film

wildon · « **Reply #1942 on:** April 06, 2014, 09:50 PM »

Surprised this didn't get more interest on ebay .. it finished today with no bids at all. Messaged the guy after and just been to pick it up.
Original finish to everything on here and real nice condition it is too

laidback · « **Reply #1943 on:** April 07, 2014, 10:30 PM »

I might have just paid for this:

Hoping it's as good as it looks

Retrodan72 · « **Reply #1944 on:** April 07, 2014, 10:35 PM »

Another set of 7x copies from Australia, the same as the ones on the Patty, but £8 cheaper.

£42 posted from Oz, not to be sniffed at.

Sent while strangling Kojak from my iPhone

insectbones · « **Reply #1945 on:** April 07, 2014, 10:51 PM »

A pair of 24x1.75 Ukai speedlines, and a pair of same size Mitsuboshi comp 3's

No pics until they get here

Gary72 · « **Reply #1946 on:** April 07, 2014, 11:28 PM »

Ahearne Spaceman flask holder, Coming from the USA, Just need to work out how to mount it to a BMX frame with no mounts.

Goes with my last post in this thread

Ideal for MK lake ride

BMX1973 · « **Reply #1947 on:** April 08, 2014, 09:14 AM »

Take it apart, clean it up, put it back together, that will be one real nice survivor.

Quote from: laidback on April 07, 2014, 10:30 PM

I might have just paid for this:

Hoping it's as good as it looks

laidback · « **Reply #1948 on:** April 08, 2014, 09:53 AM »

Quote from: BMX1973 on April 08, 2014, 09:14 AM

Take it apart, clean it up, put it back together, that will be one real nice survivor.

That's the plan. Tyre and Brake cable change, (white gumwalls, white cables) I *might* put some 48's or white OGK's on it

skippyg · « **Reply #1949 on:** April 08, 2014, 08:08 PM »

looks nice laidback,you wanna sell me that headpost badge lol