Author Topic: Today I bought, or it got delivered, or I fitted... (Read 553096 times)

hunterdubber · « **Reply #1975 on:** April 23, 2014, 09:07 PM »

My goodness , I likes a bit o brass

Retrodan72 · « **Reply #1976 on:** April 25, 2014, 06:28 PM »

A nice Sugino spider and 44t off an RB.com member. These are for the '85 GT Pro I'm doing.

Sent while strangling Kojak from my iPhone

Jaan · « **Reply #1977 on:** April 26, 2014, 05:20 PM »

Quote from: sawzall on April 23, 2014, 09:02 PM

they made a nice job of the stem chris

Very nice Phil, and it was free in he end

Jaan · « **Reply #1978 on:** April 28, 2014, 06:45 PM »

Very VERY pleased to have landed this early Black Shadow.

Notice the oval down tube, the solid drops and the "missing" integrated seat post clamp - the cut out in the drops, round down tube and clamp all came later...

Forks

It does have some issues so its going to need a trip to Doctor Phil for some TLC (I haven't told him yet)

Bfellows · « **Reply #1979 on:** April 28, 2014, 07:45 PM »

If I had a boat it would now be floating

Jaan · « **Reply #1980 on:** April 28, 2014, 09:46 PM »

Mine is bobbing along nicely

Jono · « **Reply #1981 on:** May 04, 2014, 08:25 PM »

updated photo's getting there with the library bus

QUADROPHENIA · « **Reply #1982 on:** May 04, 2014, 09:19 PM »

Another cheeky FBM arrived this week from Steve lifer, stoked

pickle · « **Reply #1983 on:** May 04, 2014, 09:33 PM »

Nice one Pete, is it the camaro?

QUADROPHENIA · « **Reply #1984 on:** May 04, 2014, 10:10 PM »

Yes buddy, was gonna powder back to blue but the blacks just to good, deffo done by one of dans finest workers

griff · « **Reply #1985 on:** May 04, 2014, 10:20 PM »

Quote from: Jaan on April 28, 2014, 06:45 PM

It does have some issues

No kidding! What happened to that weld? Did the guy fall asleep halfway through?

Will look ace when it's all sorted and built up Chris, can't wait to see how it turns out

pickle · « **Reply #1986 on:** May 04, 2014, 11:08 PM »

Quote from: QUADROPHENIA on May 04, 2014, 10:10 PM

Yes buddy, was gonna powder back to blue but the blacks just to good, deffo done by one of dans finest workers

Ahhhh nice one! The original blue is nice though

Gary72 · « **Reply #1987 on:** May 04, 2014, 11:31 PM »

Quote from: QUADROPHENIA on May 04, 2014, 10:10 PM

Yes buddy, was gonna powder back to blue but the blacks just to good, deffo done by one of dans finest workers

SuperBikeBilly, heard he has been under cutting his old man

QUADROPHENIA · « **Reply #1988 on:** May 05, 2014, 01:34 AM »

Yep he's on it, and he don't wear white loafers...BTW he's girlfriend is WOW

Jaan · « **Reply #1989 on:** May 07, 2014, 03:29 PM »

GHP pad set - has anyone else seen a set of these other than Rich's black set?

snoopy72 · « **Reply #1990 on:** May 10, 2014, 04:57 PM »

Well at last, after being messed about for month's by a couple of engineer's, the first having it for 4 month's and not even touching it, the second who had it for a couple of weeks a quoted me £1200

then I found someone that was reliable and 4 weeks later the crank is now complete and cut out of grade 5 titanium for the fatgoose project.

pickle · « **Reply #1991 on:** May 10, 2014, 09:26 PM »

Great stuff! Nice one

Gary72 · « **Reply #1992 on:** May 10, 2014, 10:13 PM »

Quote from: snoopy72 on May 10, 2014, 04:57 PM

Well at last, after being messed about for month's by a couple of engineer's, the first having it for 4 month's and not even touching it, the second who had it for a couple of weeks a quoted me £1200 then I found someone that was reliable and 4 weeks later the crank is now complete and cut out of grade 5 titanium for the fatgoose project.

Cant wait, What happened to the thread?

snoopy72 · « **Reply #1993 on:** May 10, 2014, 10:24 PM »

I originally made the thread on retro-goose.com and when I put photo's up you then get messages up in between, also I have changed so many parts during the year, by 18 pages it got really messy so I had the thread removed.
The plan is to re make the thread from start to finish with new photo's and write up so comment's and questions can be added afterwards.

The frame welding should be completed by the end of next week, then I'm going to replace the black spokes for polished stainless, remove the reflector brackets and also fit the rear disc hub. I shall then build the bike complete to make sure everything works ok before I strip it again for the paint.