RADBMX.CO.UK

Old School BMX 1980 - 1988 => Old School Freestyle (frame stands and kickturns galore!) => Topic started by: bob1984bmx on October 02, 2016, 05:49 PM

Title: Anyone built a 2014 Haro MDTribute Frameset? What headset did you use please?
Post by: bob1984bmx on October 02, 2016, 05:49 PM

Hi, has anyone built a 2014 Haro Mike Dominguez Tribute Frameset? If so what headset did you use please?

Ive tried the reissue "Haro Genuine Vintage Headset"
http://www.alansbmx.com/1636042/products/haro_genuine_vintage_headset_1_inch_threaded_headset.aspx

but the crown race is 26.4 and my local bike shop couldnt get it on, measured the forks and they were 26.7 so they put a near identical one of those on instead. The rest goes together ok but the very last top bolt wont go on, it turns a few mm and pops off, will only go on at all if i remove the thick washer below it.

Thanks

Title: Re: Anyone built a 2014 Haro MDTribute Frameset? What headset did you use please?
Post by: Trotter on October 03, 2016, 10:29 AM

I had the same problem , tried a Haro headset and a Tange headset , both wouldn't go on . Ended up opening the crown race up using a dremmel with a grinding bit attached .

Title: Re: Anyone built a 2014 Haro MDTribute Frameset? What headset did you use please?
Post by: bob1984bmx on October 03, 2016, 02:43 PM

Thanks for the reply.  :daumenhoch: Did your top bolt go on ok for either of those headsets? Did you leave the washer off? I think a much thinner washer might just work on mine.

Title: Re: Anyone built a 2014 Haro MDTribute Frameset? What headset did you use please?
Post by: Trotter on October 03, 2016, 03:22 PM

(http://i50.photobucket.com/albums/f309/markliptrot/06D57F36-5C17-4EB7-9FFA-3C7B538D3036_zpskmzgn8xl.png) (http://s50.photobucket.com/user/markliptrot/media/06D57F36-5C17-4EB7-9FFA-3C7B538D3036_zpskmzgn8xl.png.html)
That's mine , looks like there is a washer in there , didn't any trouble with the top but.

Title: Re: Anyone built a 2014 Haro MDTribute Frameset? What headset did you use please?
Post by: bob1984bmx on October 03, 2016, 07:52 PM

Thanks for the picture of your Tange headset  8) Yes the washer does seem to be there.

I got a reply back from John Buultjens, BMX Brand Manager at Haro Bikes, and he said i could just leave the washer off the Haro headset. So ill go with that idea, if it doesnt work ill get the Tange one  :daumenhoch: