RADBMX.CO.UK

Old School BMX 1980 - 1988 => Old School Freestyle (frame stands and kickturns galore!) => Topic started by: Retrodan72 on March 29, 2012, 04:31 PM

Title: Latest Build - '84 US GT Pro Performer
Post by: Retrodan72 on March 29, 2012, 04:31 PM
I got this earlier this year, it's an ex Sweetbeats/Stu27 bike and I got the f/f from Stu back in Feb. :coolsmiley:

...i'd first seen the bike in Blackpool last year when Jase had it, it had polished Araya's and chrome GT Pro bars on it amongst other sexy parts, then Stu had it and completely changed it again using yellow Tuffs and contrasting blue/red bits, these were both stunning looking bikes respectively, but there's a yellow Performer in the museum (can't remember the owner :-[) that always attracted my attention, and I knew that if a nice yellow frameset ever came up this was the direction i'd base one on  :smitten:

...so Me and Stu cut a deal and I started sourcing parts... ;)

...this is the progress so far...
(http://www.radbmx.co.uk/archive/albums/rr359/Retrodan72/Picture328.jpg)
(http://www.radbmx.co.uk/archive/albums/rr359/Retrodan72/Picture329.jpg)
(http://www.radbmx.co.uk/archive/albums/rr359/Retrodan72/Picture330.jpg)

...I wanted to keep it simply yellow and black, also like all my builds, on a budget :-[.

So first I went for a Nikyo headset with a Tange headlock, repop DC seat clamp, the Z's are off my DP, these are the show set with decals but will use a decaless set when being ridden, the stem was a scabby repop one that Dan worked his magic on, even filling the hole for me on the top :4_17_5: this has a hollw bold bought from Kappy.

The bars were some I bought off Wini ages ago, Dan powdered those for me too, and the tyres are Kenda K55's from eBay, and the pedals are NOS ones from Terry :coolsmiley:

The other bits, brakes and crank were from my white Performer which has been stripped and sold to Brett -  :'( great bike.

The Tuf Neck chainring will be getting swapped for a sugino eventually and those New School pads will be getting changed too.

I've just ordered a repop Kashi from eBay and i'll get a KMC chain from my LBS, then it's ready to roll, probably Blackpool. :daumenhoch:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: Discostu on March 29, 2012, 04:41 PM
Looking good dan.  :smitten: :smitten: :4_17_5:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: robiridr on March 29, 2012, 06:19 PM
Very nice :daumenhoch: :4_17_5:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: mani on March 29, 2012, 07:10 PM
i love black and yella nice build that mate :daumenhoch:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: deeman on March 29, 2012, 07:17 PM
Looks sweet Dan,love it on the Z's! :daumenhoch:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: CD17 on March 29, 2012, 07:20 PM
Nice I love this Performer, it was mine a few years ago & SteveP had it before me  :daumenhoch:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: sweetbeats on March 29, 2012, 07:21 PM
Nice Job Dan  8)
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: rollin72 on March 29, 2012, 07:52 PM
looking good so far Dan :daumenhoch:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: Robbo on March 29, 2012, 08:01 PM
Love it, looks the nuts!!  :4_17_5:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: Retrodan72 on March 29, 2012, 08:25 PM
Nice I love this Performer, it was mine a few years ago & SteveP had it before me  :daumenhoch:

Nice one, i'm glad it's been passed about, sharing the Rad love etc, I may have a peep in the museum and try and find some incarnations of it. :daumenhoch:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: In2 bmx on March 29, 2012, 08:29 PM
Nice one Dan .. It looks mint .  :daumenhoch:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: Frosty on March 29, 2012, 09:14 PM
Love it, Zeds much underrated IMHO  :daumenhoch:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: brettypeeps on March 29, 2012, 09:23 PM
As I said at the weekend it Looks sweet as  :smitten: :smitten:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: brummie on March 29, 2012, 09:25 PM
very nice dan :)
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: Darren KAP on March 29, 2012, 09:43 PM

  This looks super cool Dan , very similar to mine  :smitten:  the yellow alloy Tuffs that Stu had on it came off me which i now have back as i really regretted selling them , nothing to put them on but at the moment but it's an excuse to buy something to put them on  ::)

   
     :4_17_5:  best colour for a 84 GT   IMO  :daumenhoch:


                                                              Kappy
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: Retrodan72 on March 29, 2012, 09:45 PM
If you're looking for something to put your yellow Tuffs on, how about an '83 Tuff Burner? :coolsmiley:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: Darren KAP on March 29, 2012, 09:56 PM
If you're looking for something to put your yellow Tuffs on, how about an '83 Tuff Burner? :coolsmiley:


             :2funny: :2funny:   No thanks  :2funny:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: stu27 on March 29, 2012, 10:23 PM
that looks a reall tidy build dan :smitten:
better than when i fooking had it anyway :LolLolLolLol:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: rad_pitt on March 29, 2012, 10:26 PM
Nice one Dan  :4_17_5:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: M5AT on March 29, 2012, 10:28 PM
Be double smart when it's done that :daumenhoch:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: stu27 on March 29, 2012, 10:31 PM
forgott to say as well dan
leave a few extra links in the chain,nice and slack
the way i rolled the smoke on it
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: Badbaldie on March 29, 2012, 11:30 PM
If you're looking for something to put your yellow Tuffs on, how about an '83 Tuff Burner? :coolsmiley:

and if ur bored with them zds Dan  :LolLolLolLol:  looks great mate  :daumenhoch:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: Darren KAP on March 29, 2012, 11:49 PM

  they  look very much alike Dan  :4_17_5:
(http://i1183.photobucket.com/albums/x462/darrenkap/DSCF0002-14.jpg)

Title: Re: Latest Build - '84 US GT Pro Performer
Post by: Badbaldie on March 30, 2012, 12:31 AM

  they  look very much alike Dan  :4_17_5:
(http://i1183.photobucket.com/albums/x462/darrenkap/DSCF0002-14.jpg)



no they dont .... Dans has got real bmx wheels on it ... and yours Mr Kap has a stupid radiator in the back ground  :LolLolLolLol:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: Robbo on March 30, 2012, 07:25 AM
Back for another look Mr Retro, could I be feeling the love for GT instead of Haro for once??  :D  :daumenhoch:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: NORTY40 on March 30, 2012, 09:15 AM
Looks good Dan  :daumenhoch:

Liking the Z's on it  8)
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: Retrodan72 on March 30, 2012, 09:40 AM
Looks good Dan  :daumenhoch:

Liking the Z's on it  8)

I dyed them myself Joff but don't tell Lenny. :yahoo_silent:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: mr p.k. on April 01, 2012, 07:40 PM
Looking good fella :daumenhoch: can't beat a yellow performer  :smitten:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: lk_97 on April 02, 2012, 10:02 AM
Nice bike :daumenhoch: and you Darren :daumenhoch:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: WARDY on April 03, 2012, 07:16 AM
 :smitten:  :4_17_5: love the yellow ones with black parts , zeds look ace , love performers full stop , heres my yellow one


(http://www.radbmx.co.uk/archive/albums/ee16/lockjaw1/gtlg1.jpg)


Title: Re: Latest Build - '84 US GT Pro Performer
Post by: Retrodan72 on April 03, 2012, 08:27 AM
Nice that is Wardy mate. :smitten:

As I mentioned in an earlier post in the thread, there's one in the Museum that always got my attention, what are the chances that it was actually built by SteveP and it is now the very frameset I own. Unbelievable. :daumenhoch:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: renegaderacer on April 03, 2012, 08:34 AM
Loving this so far, Dan.  :smitten:

Can't wait to see it finished! Good to see it's going to be ridden too.  :daumenhoch:

Giles  ;D
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: Retrodan72 on April 03, 2012, 08:40 AM
Certainly will Giles, Blackpool will be it's maiden voyage, it will be it's 2nd year there as Jase rode it last year. :daumenhoch:

I'll have to get a decent camera, these pics don't do it justice. :(
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: Swivel on April 03, 2012, 09:40 AM

  they  look very much alike Dan  :4_17_5:
(http://i1183.photobucket.com/albums/x462/darrenkap/DSCF0002-14.jpg)



Nice dazza  :4_17_5:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: Retrodan72 on April 03, 2012, 09:44 AM
Chainring arrived yesterday Matt, cheers, it will be replacing the Tuf Neck whan I get some chrome bolts. :daumenhoch:
Title: Re: Latest Build - '84 US GT Pro Performer
Post by: Retrodan72 on April 03, 2012, 01:22 PM
Had a tinker today and changed the chainring for a 44t Sugino that I got off Matt, also using some chrome bolts. Addes a Pro Performer bar decal and GT foil coin to the bars dan had powdered, decals are from our very own Del. :daumenhoch:
(http://www.radbmx.co.uk/archive/albums/rr359/Retrodan72/Picture338.jpg)
(http://www.radbmx.co.uk/archive/albums/rr359/Retrodan72/Picture339.jpg)
SimplePortal 2.3.5 © 2008-2012, SimplePortal