RADBMX.CO.UK
Old School BMX 1980 - 1988 => Old School Freestyle (frame stands and kickturns galore!) => Topic started by: jim350i on March 28, 2013, 09:29 PM
-
Well, the long lesson is over, mistakes? Hell yeah, learnt loads? Hell Yeah. Was it worth it?
1984 GT Pro performer rescued from a pals garage. The bike has been stood lonely since 1993. It has been sold and bought back from the same owner more than once.
Some parts you want because you want them, you had them and you want them again! It may not be the correct this and the correct that, but some people like brown source on bacon sandwiches, some red. There is no should have, that's why they come apart!
Thanks for your help chaps.
Enjoy.
Barn Find
(http://i1356.photobucket.com/albums/q722/Jim350i/BMX%20Stuff/GTpro_zps4cb12d36.jpg)
Urban backdrop
(http://i1356.photobucket.com/albums/q722/Jim350i/P3288597_zpse590332b.jpg)
GT powder white in snow
(http://i1356.photobucket.com/albums/q722/Jim350i/P3288591_zps65bc47b6.jpg)
Rescued Kashimax (from Hell and back!
(http://i1356.photobucket.com/albums/q722/Jim350i/P3288563_zps285d86db.jpg)
Dice caps (Cheers Scotty )
(http://i1356.photobucket.com/albums/q722/Jim350i/P3288559_zps9c17a6c0.jpg)
Nice alloy hubs Tuff 2's
(http://i1356.photobucket.com/albums/q722/Jim350i/P3288558_zpsc8cfaa74.jpg)
Powder GT bars
(http://i1356.photobucket.com/albums/q722/Jim350i/P3288575_zps33efcb10.jpg)
Power stem
(http://i1356.photobucket.com/albums/q722/Jim350i/P3288574_zps5a321db6.jpg)
Tioga Task guilty pleasure, Sugino cro mo 1 pc crank
(http://i1356.photobucket.com/albums/q722/Jim350i/P3288577_zps21b754d9.jpg)
MK hugging the GT layback
(http://i1356.photobucket.com/albums/q722/Jim350i/P3288576_zpsf896297a.jpg)
Just Clean lines
(http://i1356.photobucket.com/albums/q722/Jim350i/P3288580_zps4c2d422c.jpg)
Bare GT Bars
(http://i1356.photobucket.com/albums/q722/Jim350i/P3288594_zpsc51cde73.jpg)
Some things are better left Black and White
(http://i1356.photobucket.com/albums/q722/Jim350i/P3288583_zps02ff2677.jpg)
ARX in cognito
(http://i1356.photobucket.com/albums/q722/Jim350i/P3288584_zpsc6a0fbb4.jpg)
Fully Clothed
(http://i1356.photobucket.com/albums/q722/Jim350i/P3288569_zps0a15c3b7.jpg)
Hanging around
(http://i1356.photobucket.com/albums/q722/Jim350i/P3288591_zps65bc47b6.jpg)
Hanging around too
(http://i1356.photobucket.com/albums/q722/Jim350i/P3288587_zpsa9a03a74.jpg)
Final out come
(http://i1356.photobucket.com/albums/q722/Jim350i/P3288592_zpsfc93b626.jpg)
-
Just got to love a white Performer :smitten:
-
Spot on job Jim :smitten:
Just need to turn seat guts round.
-
Spot on job Jim :smitten:
Just need to turn seat guts round.
I have been told on the Guts front Mi Bad! I was trying to squeeeeeze an extra inch as i'm a ted taller than i was in '84! LOL
Cheers Dude.
-
Very nice Performer... always like them... :smitten: :smitten: :smitten:
-
Looks the bomb bro. Love a white performer :4_17_5:
-
Love a white performer :smitten: :smitten:
some nice restore work :daumenhoch:
-
Pull the bars back, it's not a burner :crazy2:
-
Boom boom :4_17_5:
-
looking good :daumenhoch:
-
Pull the bars back, it's not a burner :crazy2:
:daumenhoch:
-
thats sweet mate - great job !!! :daumenhoch:
how did you get the seat to come up so well?
-
thats sweet mate - great job !!! :daumenhoch:
how did you get the seat to come up so well?
Check the link out. It does work but you have to be very brave. I had nothing to lose.
http://www.raleighburner.com/phpBB2/viewtopic.php't=10705
There is another post where you wave a blow torch over the seat and you get the stipple back. Even braver man. Good luck
Jumbo
-
Nice one :daumenhoch:
-
Cool resto mate. 8)
-
nice one, very nice :daumenhoch:
-
Looks ACE. :daumenhoch:
Adam
-
Awesome resto there! Youve certainly transformed it! Top job! :daumenhoch:
-
Guts back in where they belong, thanks chaps, every days a school day!:lol:
(http://i1356.photobucket.com/albums/q722/Jim350i/Stratford-on-Avon-20130330-00530_zps39bf4dce.jpg)
-
Lovely that fella, always liked the white Performer, sooooooooooooo 80's ;)
84's are pretty rare to. He must of broke the original forks?
-
Absolutely love it mate,an amazing turnaround!I would change the decals for 84 ones as it is a valuable 84.Oh,and the decal on the seatpost needs changing to match the ones on the frame.a potts mod would finish it a treat :daumenhoch:
-
Absolutely love it mate,an amazing turnaround!I would change the decals for 84 ones as it is a valuable 84.Oh,and the decal on the seatpost needs changing to match the ones on the frame.a potts mod would finish it a treat :daumenhoch:
I did think about the decal on the seat post? DEcals on the frame are sooooo not coming off. I Heinsight i would not have fitted the purchased as "Ultrahive original GT Pro Performer" Decals and would have seeked the non Japan ones! But we are all wise with this friend. Still its the real deal underneath!! WHoooooooooooooo.
Thanks for the comments
Jimmy
PS WTF a potts mod??
-
Lovely that fella, always liked the white Performer, sooooooooooooo 80's ;)
84's are pretty rare to. He must of broke the original forks?
Cheers chapper, Why are '84's rare? The forks came on it???? and the Suntour power stem? Like an Raleigh aero Pro had its front end "borrowed" there was no front rim either? just the rear OGK rim? Still, Its someone's story out there!
Jimmy
-
Awesome resto there! Youve certainly transformed it! Top job! :daumenhoch:
cheers Gav
-
Very nice Performer... always like them... :smitten: :smitten: :smitten:
Thanks senzo
-
Lovely that fella, always liked the white Performer, sooooooooooooo 80's ;)
84's are pretty rare to. He must of broke the original forks?
Cheers chapper, Why are '84's rare? The forks came on it???? and the Suntour power stem? Like an Raleigh aero Pro had its front end "borrowed" there was no front rim either? just the rear OGK rim? Still, Its someone's story out there!
Jimmy
I guess you just don't see as many these days Jimmy, a lot more 85's about, making them worth a fair bit more I think ;) They aren't the original forks, but heh like you say someone's story there, what a great find and brilliant job you've made of it. I bet your well pleased, what do your mates think?
-
Absolutely love it mate,an amazing turnaround!I would change the decals for 84 ones as it is a valuable 84.Oh,and the decal on the seatpost needs changing to match the ones on the frame.a potts mod would finish it a treat :daumenhoch:
I did think about the decal on the seat post? DEcals on the frame are sooooo not coming off. I Heinsight i would not have fitted the purchased as "Ultrahive original GT Pro Performer" Decals and would have seeked the non Japan ones! But we are all wise with this friend. Still its the real deal underneath!! WHoooooooooooooo.
Thanks for the comments
Jimmy
PS WTF a potts mod??
A potts mod is where you have a hollow stem bolt and route the front brake cable through it.It allows you to spin the bars a bit without the front cable to foul up.Pretty much a standard mod on any freestyler of the era. :daumenhoch:
-
Absolutely love it mate,an amazing turnaround!I would change the decals for 84 ones as it is a valuable 84.Oh,and the decal on the seatpost needs changing to match the ones on the frame.a potts mod would finish it a treat :daumenhoch:
I did think about the decal on the seat post? DEcals on the frame are sooooo not coming off. I Heinsight i would not have fitted the purchased as "Ultrahive original GT Pro Performer" Decals and would have seeked the non Japan ones! But we are all wise with this friend. Still its the real deal underneath!! WHoooooooooooooo.
Thanks for the comments
Jimmy
PS WTF a potts mod??
A potts mod is where you have a hollow stem bolt and route the front brake cable through it.It allows you to spin the bars a bit without the front cable to foul up.Pretty much a standard mod on any freestyler of the era. :daumenhoch:
Ahh the old gyro brake thang?? I must be a tad older than you friend, this would be like cheating for me? Did they have these in '83/84? It screams 90's to me, I maybe utterly wrong? I had an '83 Aero Pro BITD and always got my brake cables in a muddle! It would be better agreed, but for nostalgia sake ? whey.
Jim
-
No a Potts Mod isn't a gyro. It's where your front brake cable is routed through your stem shaft bolt to avoid it tangling when the bars are spun. As the cable is then threaded from below on your front caliper it affords a greater clearance between your front caliper and your frame.
-
No a Potts Mod isn't a gyro. It's where your front brake cable is routed through your stem shaft bolt to avoid it tangling when the bars are spun. As the cable is then threaded from below on your front caliper it affords a greater clearance between your front caliper and your frame.
Ahh, I have seen these and yes a good idea. I would not mind a potts mod.
Can you just purchase the bolt? (and wedgey bit i suppose)
Jimmy
-
Nice!
-
thats a lovely buid there matey i have just finished an 85 in yellow :daumenhoch: it was pointed out to me that my decals on the non drive side were upside down as it looks like yours are also im led to believe its a common mistake :LolLolLolLol: easy fix if you have spares ........i was told it should read the same if you were pulling a wheelie ? if that helps :daumenhoch:
-
Dude, there only up side down if the bikes the right way up. I getting some wild air friend LOL.
Ah well. I have no spares, i dont mind being pointed at, as long as they are laughing at me there laughing at no one else!!!
cheers friend.
-
if you want to change it and dont have a spare decal i can post you one i have some spares :daumenhoch:
-
if you want to change it and dont have a spare decal i can post you one i have some spares :daumenhoch:
Fudgey
well , well appreciate the offer friend, but my PRO is different to yours, subtle i know, but true. I may have been slipped a custard in the decal department, but hey if the suckers are upside down no one gives a flying coot! (or other water based weed inhibitive fowl)
Jim
-
Thanks for your coments dudes, had 1st ride out the other day, rides like a dream
Also changed the seat stem decal, nice :daumenhoch:
-
Lookin good Jim, those tyres still look mint mate get them thrashed :4_17_5:
-
Lookin good Jim, those tyres still look mint mate get them thrashed :4_17_5:
You are more than right friend. Need to get some tyre wear weather!! Off to Leamingtom spa track when I can. :daumenhoch:
-
Looking Awesome Jim!!!! Extremely well done bud...you gotta make the time to ride this baby :D
-
Nice performer :)
-
Yup I like a 84 Performer too Jim :smitten: yours looks great ;)
I also like Brown sauce on my Bacon butties :smitten:
-
Isn't brown sauce on bacon butties the law ???
-
Isn't brown sauce on bacon butties the law ???
take a look at the "North South Divide, Where's yours" thread. Made me laugh ;D an overwhelming response, i opened a can of worms with the red or brown source, lovely to see it come back at me. :2funny:
But it is deffo red on a bacon and egg sarnie. :LolLolLolLol:
-
Yup I like a 84 Performer too Jim :smitten: yours looks great ;)
I also like Brown sauce on my Bacon butties :smitten:
cheers dude :daumenhoch:
-
Looking Awesome Jim!!!! Extremely well done bud...you gotta make the time to ride this baby :D
Cheers Mat, you are correct about the time, I will make some. Once the football season (and tournaments) have stopped eating my time! Get some flat land for me buddy! :daumenhoch:
-
Will do man, loving this weather so making the most of it :-)