RADBMX.CO.UK
		Cupid Stunt Bike of the Month/Year => Past Entries => Cupid Stunt Bike of the Month/Bike of the Year => 2008 => Topic started by: stidds on December 15, 2008, 02:26 PM
		
			
			- 
				Tis the season for posting your December builds for BOTM!   
 
 Old and Mid school only please fellas....lets see those lovely never before seen builds!
 
 
 Lets see your festive builds  :daumenhoch:
 
 
 Not too much spam either boys and girls, lets try to keep the waffle to a minimum, otherwise I will hunt you down and shoot you like a dog!!!!   :knuppel2:
 
- 
				1988 HARO TEAM MASTER
 
 (http://www.radbmx.co.uk/archive/albums/b326/joe6187/88%20MASTER/DSC_4594.jpg)
 (http://www.radbmx.co.uk/archive/albums/b326/joe6187/88%20MASTER/DSC_4603.jpg)
 (http://www.radbmx.co.uk/archive/albums/b326/joe6187/88%20MASTER/DSC_4577.jpg)
 (http://www.radbmx.co.uk/archive/albums/b326/joe6187/88%20MASTER/DSC_4647-1.jpg)
 (http://www.radbmx.co.uk/archive/albums/b326/joe6187/88%20MASTER/KEN_5071.jpg)
 (http://www.radbmx.co.uk/archive/albums/b326/joe6187/88%20MASTER/TeamWallpaper.jpg)
 
 Parts brake down :
 88 Haro master f/f, Haro kneesavers bar,
 Haro Team freestyle stem, Gyro 1 system,
 YST headseat, Peregrine seatclamp,
 Peregrine 1gen 3 pcs cranks with sealed bearing BB,
 Haro 44T sporket, Shimano DX pedal, Izumi chain,
 Suntour 16T freewheel, DC 883 front brake, 990 rear brake,
 Tech5 locking levers, Peregrine Super pro wheelset,
 Peregrine Hp tires, Dominator seat, AME grips.
- 
				That 3rd pic rocks. :4_17_5:
 
 Nice bike to start it off. :daumenhoch:
- 
				Here's my Ammaco Team Pro.this bike is absolutely stunninng in the flesh! hope the pic shows it a bit.F+F's is a kinda of Candy Apple red :smitten: all parts were nos when fitted,Polished Tuf neck stem,Polished Araya 7X's,Comp III's,Viscount aero ammaco seat,SR Turbo X crank,Chrome KKt pedals,tioga sealed B/B,Cal lite padset etc..this is one of my favorite builds,hope you like it :daumenhoch: 
 
 (http://www.radbmx.co.uk/archive/albums/b270/daz1969/newsale3049.jpg)
- 
				early 90's CLAYBORN BACKBONE EXPRESS :daumenhoch:
 
 boss pro bars (have since removed the surface rust off bars ::) )
 nos dk pro stem
 nos oddy t1000s with  nos richie megabites
 selle italia
 pitbull 1 caliper
 gt 180 profiles and ring
 
 not everyones cuppa...but..
 im lovin this:
 (http://www.radbmx.co.uk/archive/albums/n258/ODFLYER/100_1526.jpg)
 (http://www.radbmx.co.uk/archive/albums/n258/ODFLYER/100_1524.jpg)
 (http://www.radbmx.co.uk/archive/albums/n258/ODFLYER/100_1523.jpg)
 (http://www.radbmx.co.uk/archive/albums/n258/ODFLYER/100_1528.jpg)
 (http://www.radbmx.co.uk/archive/albums/n258/ODFLYER/100_1512.jpg)
 (http://www.radbmx.co.uk/archive/albums/n258/ODFLYER/100_1508.jpg)
- 
				Gen 3 1984 Haro Sport.
 
 Kasimax Aero - NOS
 AM'E Tri Grips - NOS
 Dia Compe MX 901's - NOS
 Vector Bars - Re Chromed with new decals
 Haro Tech Plate - NOS
 Cali Lite Pad Set - NOS
 Takagi Chain Wheel & Spider (NOS)
 Yaban Chain - (NOS)
 Tange Seat Clamp (NOS)
 Tioga Comp III's - (NOS)
 UKAI Rims - (NOS)
 Shimano DX Hubs - (NOS)
 Coke Caps -  (NOS)
 Redline Flights -  (Twin Pinch)
 Crupi Pedals
 
 Thanks for looking & MERRY CHRISTMAS!!!  :daumenhoch:
 
 (http://www.radbmx.co.uk/archive/albums/k376/torkertony/Sport1.jpg)
 
 (http://www.radbmx.co.uk/archive/albums/k376/torkertony/Sport3.jpg)
 
 (http://www.radbmx.co.uk/archive/albums/k376/torkertony/Sport8.jpg)
 
 (http://www.radbmx.co.uk/archive/albums/k376/torkertony/Sport4.jpg)
 
 (http://www.radbmx.co.uk/archive/albums/k376/torkertony/Sport6.jpg)
 
 (http://www.radbmx.co.uk/archive/albums/k376/torkertony/Sport5.jpg)
 
 T. :Great_Britain:
- 
				what a stunning  bike  love it  to bits well done  :daumenhoch:
			
- 
				haro fst 85 white black and  chrome  ........ massive  round of applause for  "del" on this  one  again  love these  decals  :smitten:
 (http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/DSCF1634.jpg)
 (http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/DSCF1635.jpg)
 (http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/DSCF1628.jpg)
 (http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/DSCF1644.jpg)
 (http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/DSCF1641.jpg)
 (http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/DSCF1633.jpg)
 (http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/DSCF1639.jpg)
- 
				Sweet FST - the chrome in the decals really looks smart.  :smitten:  :smitten:
			
- 
				Loving the use of alloyed hubbed tuffs this month lads. :4_17_5:
 
 Make a build look so much better than placky hubbed ones imo.
 
 Torker tony's haro looks proper old skool (apart from the twin pinch!).  :4_17_5:
 
 
- 
				
 
 
 cracking Clayborn Daz  :daumenhoch:
 
 don't think i've spied one before  ;)
 
 
 
 Ade :crazy2:
- 
				Now I know I said keep the spam to a minimum, BUT.................
 
 
 Daz, that Clayborn is a true thing of beauty.  :4_17_5:
- 
				cheers for the comments dudes, as ive said in other thread, i just threw it together, its more a testament to the f/f more than anything else as how its turned out :)
			
- 
				First build, pretty much everything stripped and repowdered (frame was bare '85 streetbeat), tange-tx-1200 forks (was gonna put my mity lites on it but they are such a work of art, too good to powder!)
 custom streetbeat vinyls, fusion stem, crank, mx1000s inverted at the front, new gen skyways sealed bearing, odyssey post, hutch tricktop seat, suntour first gen seat clamp, diamondback ally chainring, second gen ezbars, stuck new tyres and thornproof innertubes on it 'cause i intended to ride it, but now i've done it, I don't want to wreck it. going on the bay today as it's just getting knocked about.
 
 (http://www.radbmx.co.uk/archive/albums/pp47/clowntype/100_2410.jpg)
 (http://www.radbmx.co.uk/archive/albums/pp47/clowntype/100_2406.jpg)
 (http://www.radbmx.co.uk/archive/albums/pp47/clowntype/100_2417.jpg)
 (http://www.radbmx.co.uk/archive/albums/pp47/clowntype/100_2413.jpg)
 (http://www.radbmx.co.uk/archive/albums/pp47/clowntype/100_2416.jpg)
 
 thanks to:
 jt71 and rox
 for bits and sh*t
- 
				GT nora cup f+f+bars
 ukai rims and shimano hubs
 suntour seat clamp and stem
 kashi aero seat
 surgino 1 piece
 diacompe mx 1000 and tech 2
 
 
 (http://www.radbmx.co.uk/archive/albums/ii194/quattro2008/IMG_1032.jpg)
 
 (http://www.radbmx.co.uk/archive/albums/ii194/quattro2008/IMG_1035.jpg)
 
 (http://www.radbmx.co.uk/archive/albums/ii194/quattro2008/IMG_1038.jpg)
 
 (http://www.radbmx.co.uk/archive/albums/ii194/quattro2008/IMG_1039.jpg)
- 
				restored original pro hax from the early 80s with a restored mongoose motomag.
 (http://www.radbmx.co.uk/archive/albums/y77/sawzall717/017-2.jpg)
 (http://www.radbmx.co.uk/archive/albums/y77/sawzall717/013-1.jpg)(http://www.radbmx.co.uk/archive/albums/y77/sawzall717/motomagresto005.jpg)
 (http://www.radbmx.co.uk/archive/albums/y77/sawzall717/motomagresto012.jpg)
 
 
 (http://www.radbmx.co.uk/archive/albums/y77/sawzall717/radxmas2008001.jpg)
 (http://www.radbmx.co.uk/archive/albums/y77/sawzall717/radxmas2008002.jpg)
 (http://www.radbmx.co.uk/archive/albums/y77/sawzall717/radxmas2008003.jpg)
- 
				Nice one Phil!!  :)
 Hack is the wrong side, though...
 
 Oh errrrr.. forget it, you're british after all  :LolLolLolLol: :LolLolLolLol:
- 
				A real work of resto that Phil, amazing 
			
- 
				Here we go, its been a while coming, but I think its good enough to enter now.
 
 Rebel 24" Cruiser (once owned by Steve Bigland, Rebel factory rider).  This is still a rider BTW.
 
 (http://img187.imageshack.us/img187/2396/dsc06119gh0.jpg)
 
 (http://img72.imageshack.us/img72/4344/dsc06128ul0.jpg)
 
 (http://img72.imageshack.us/img72/2552/dsc06134wd5.jpg)
 
 (http://img187.imageshack.us/img187/1142/dsc06121nw0.jpg)
 
 (http://img72.imageshack.us/img72/4786/dsc06122pg1.jpg)
 
 Spec includes:
 
 Reynolds 531 Rebel 24" frame & forks - powdered white
 Reynolds 531 Rebel cruiser bars - powdered white
 Suntour power stem
 red Ukai 24" rims laced to gold Suntour hubs
 Mitsuboshi Comp III green label tyres
 Tagaki 175mm crank
 black Suntour 42T chainwheel
 Suntour XC-II pedals
 black A'Me Tri's
 black DC MX1000 with black DC Tech 4 lever and DC white cable
 Reynolds 531 seatpost
 black Kashimax Super leather seat
 black Suntour seatclamp
 Full repro padset
 
 
- 
				1982 Cook Bros Racing /Claude Murphy
 
 Frame: 1982 Cook Bros Racing
 Fork/Stem: Cook bros Racing Uni-Clamp (clamps re-annodized/new hardware)
 Headset: Cook Bros Racing
 Handlebars: Cook Bros Racing
 Grips: Grab On MX II
 Brake Set: Dia Compe MX 900 w/ Mathauser Pads
 Seat: Kashimax
 Seat Post: Race Inc
 Seat Clamp: Cook Bros Racing (re-annodized/new hardware)
 Rims: Araya 7X
 Hubs:Cook Bros Racing (flanges re-annodized/new hardware/bearings)
 Freewheel: Suntour
 Spokes: Stainless
 Tires: Cycle Pro Snake Belly
 Cranks: Cook Bros Racing 181 mm/original logo
 Spider: Sugino
 Chainwheel: Sugino
 Chain: Izumi
 BB: Cook Bros Racing (new bearings)
 Pedals: Titron
 Pads: Cook Bros Racing
 Plate: Cook Bros Racing
 Decals: (reproductions)
 
 Special thanks to Steve @ Bullseye for the annodizing, and to Sam & the crew at Westbank Cyclery for building the wheels and for all their help!, Claude
 (http://www.radbmx.co.uk/archive/albums/s253/claudemurphy/1110001_4c-copy.jpg)
 (http://www.radbmx.co.uk/archive/albums/s253/claudemurphy/1110001_4.jpg)
 (http://www.radbmx.co.uk/archive/albums/s253/claudemurphy/1110001_4b.jpg)
 (http://www.radbmx.co.uk/archive/albums/s253/claudemurphy/1110001_4a.jpg)
- 
				
 
 
 Dam Claude...that is smokin hot...
 better not use my trump card on this one...LOL
 OK..GT Nora cup..
 (http://www.radbmx.co.uk/archive/albums/kk228/JMCGT/my%20favourites/IMG_6732.jpg)
 (http://www.radbmx.co.uk/archive/albums/kk228/JMCGT/my%20favourites/IMG_6729.jpg)
 (http://www.radbmx.co.uk/archive/albums/kk228/JMCGT/my%20favourites/IMG_6730.jpg)
 (http://www.radbmx.co.uk/archive/albums/kk228/JMCGT/my%20favourites/IMG_6731.jpg)
 (http://www.radbmx.co.uk/archive/albums/kk228/JMCGT/my%20favourites/IMG_6733.jpg)
- 
				both JMCGT's photos and masterstint photos are top class, are they  took by professional photographers?... :4_17_5:
			
- 
				both JMCGT's photos and masterstint photos are top class, are they  took by professional photographers?... :4_17_5:
 
 
 
 thanks!!,,,  i actually did my photos in my den,,,the photo studio I contacted wanted $500 for an hour so I figured I would give it a shot on my own,,,,I used a digital camera, tripod, and bought some vinyl material from a local cloth store $25, (I ended up "using" the other side of the material/backing/cotton side),,,I was pleased with the results,,it took a day of work but I learned a bunch about my camera and working my photo downloader program,,,claude
- 
				woooooooooooo Cook Bros is just stunning ! 
 
 No more entries chaps  :LolLolLolLol:
- 
				just making up the numbers i think... :-[
 
 the frogangle, redone with some better stuff. Mint kashi, black tuf neck, some xc11, and some NOS araya aero with nos comp3 etc....
 
 (http://www.radbmx.co.uk/archive/albums/q204/jonathonsturner/DSC02044.jpg)
- 
				LOL..and mine were taken with my $200 camera on an overcast day...you can see how white the sky is...
 I hope to do what Claude has done soon, need to put together a few more bikes first...Guess the bike helps too..
 i have been wanting to do this one for a while and wanted it flawless..
 Love you pedals Claude..   .two sets please :coolsmiley:
- 
				my aero pro 
 (http://www.radbmx.co.uk/archive/albums/s198/darren3434/Photo060.jpg)
 (http://www.radbmx.co.uk/archive/albums/s198/darren3434/Photo061.jpg)
 (http://www.radbmx.co.uk/archive/albums/s198/darren3434/Photo072.jpg)
- 
				Wow, another very nice Aero Pro this month :daumenhoch: are those Renthals NOS? curtainly look like it :daumenhoch: :daumenhoch:
			
- 
				Dang, perfect Quad...just looks tough!... 8)
			
- 
				cook bros  :smitten:  :smitten:
			
- 
				mmm, side hack all the way... :smitten: :smitten:
			
- 
				What a month  :4_17_5:
 
 Feck sake , surely they can't beat this standard for ' bike of the year '
 
 
 Clayborn , Frogangle , Rebel cruiser ,Nora's ,Cook bros
 
 I love every bike
- 
				'Street Thrashin' 1983 Skyway TA
 Inspired by this ad that I remember drooling over in BMX action bike as a 10 year old lad. Now I have one :smitten: :smitten:
 http://www.radbmx.co.uk/forum/gallery/showphoto.php?photo=44&cat=505
 
 (http://www.radbmx.co.uk/archive/albums/jj106/danlightening/IMG_2106.jpg)
 (http://www.radbmx.co.uk/archive/albums/jj106/danlightening/IMG_2108.jpg)
 (http://www.radbmx.co.uk/archive/albums/jj106/danlightening/IMG_2109.jpg)
 (http://www.radbmx.co.uk/archive/albums/jj106/danlightening/IMG_2114.jpg)
 (http://www.radbmx.co.uk/archive/albums/jj106/danlightening/IMG_2116.jpg)
 (http://www.radbmx.co.uk/archive/albums/jj106/danlightening/IMG_2107.jpg)
 
 Parts
 Beautifully rechromed TA frame and forks
 tioga beartrap headset
 suntour power stem
 CW pro bars
 Oakley F1 grips
 DC MX1000 with tech3 and white skyway tuff pads
 tioga bb
 SR crank, spider and chainring
 Skyway pedals
 DC MX hinged seatclamp
 stamped GT seatpost
 Kashimax aero seat
 alloy hubbed tuff 2s
 tioga comp 3s (blue/silver label)
 izumi chain
 
- 
				Motomag with a side hack how cool is that  8)
 
 Cook bros with NOS snakebellies and vinyl pads  :shocked:
 
 oh and the re-chrome on that last TA looks mint  :smitten:
 
 Tuff decision this one  :-\
- 
				Sidehack rules!!
 
 Cook Bros very nice too.
 
 :smitten:
- 
				wow
 some great bikes this month
 
 cooks is a real nice build
 Phils Hack is a proper beast and the resto is stunning
 the TA street thrasher is spot on as well
 rebel cruiser looks nice and authentic
 
 hmmm, tough comp
 
 Rich
- 
				Cooks Bros  :smitten:
 
 
- 
				Another really hard month to decide!!
			
- 
				my 1986 gt pro performer:paint job superbikedan/decal del
 [(http://www.radbmx.co.uk/archive/albums/gg140/leia00red/IMGP4391.jpg)
 [(http://www.radbmx.co.uk/archive/albums/gg140/leia00red/IMGP4394.jpg)
 [(http://www.radbmx.co.uk/archive/albums/gg140/leia00red/IMGP4400.jpg)]
- 
				Love that Skyway :smitten:
			
- 
				the shine on that skyway  :smitten:
			
- 
				TA :4_17_5:
			
- 
				that SideHack !!
 
 saw it at MK08 - stunning  8)
 
 didn't realise the work that went into it through !
 
 top work Phil ! gets my vote  :)
- 
				my reflex build 2nd place in rad xmas aero build off, loved doing it, my mate pinstriped it and after watching him i have now started myself.  :daumenhoch:
 (http://www.radbmx.co.uk/archive/albums/j189/2020mad/DSC_0008.jpg)
 
 (http://www.radbmx.co.uk/archive/albums/j189/2020mad/DSC_0016.jpg)
 
 (http://www.radbmx.co.uk/archive/albums/j189/2020mad/DSC_0015.jpg)
 
 (http://www.radbmx.co.uk/archive/albums/j189/2020mad/DSC_0013.jpg)
 
 (http://www.radbmx.co.uk/archive/albums/j189/2020mad/DSC_0014.jpg)
 
 (http://www.radbmx.co.uk/archive/albums/j189/2020mad/DSC_0020.jpg)
 
 (http://www.radbmx.co.uk/archive/albums/j189/2020mad/DSC_0025.jpg)
 
 (http://www.radbmx.co.uk/archive/albums/j189/2020mad/DSC_0023.jpg)
 
 
- 
				very cool
 rat rod/low brow style looks cool
 i like the white walls on red tuffs
 
 do a bit of striping myself when i get time,i also go to alot of hotrod and custom events
 my tattoo studio worked hotrod hayride lat year and should be there again this year
 
 love it :daumenhoch:
- 
				cook bros is smokin !!!!   ok its a $$$$$ bike but it press`s buttons no other bike can press  :smitten: