RADBMX.CO.UK

Old School BMX 1980 - 1988 => Old School Freestyle (frame stands and kickturns galore!) => Topic started by: graeme on July 24, 2009, 08:42 PM

Title: 88 haro master hubs/dropouts
Post by: graeme on July 24, 2009, 08:42 PM

Starting to get my 88 mster ready to build, still alot of parts needed, but i was looking at the forks and hubs.
I have 10mm axle, peregrine 48s hubs.

Whats the deal with the fork dropouts though? Its like a 10mm slot with a (14mm?) hole so the axle slots in then rattles around. Did these have flat sided 14mm hubs? Or, were there conversion washers? Or, once its all done up tight is it all ok anyway?

thanks

Title: Re: 88 haro master hubs/dropouts
Post by: CD17 on July 24, 2009, 10:30 PM

Yes you need some washers which have a little raised bit on them, I might have some, but since I move house I can't find anything  ::)

But I will sort out a link when I find you one  :daumenhoch:

http://vert-ego.com/main.htm

The link does not bring you right to them, so do a search for wheel washers & they will come up  :daumenhoch:

Title: Re: 88 haro master hubs/dropouts
Post by: graeme on July 25, 2009, 10:44 AM

found them, thanks. Thought there may be something like that :)

Title: Re: 88 haro master hubs/dropouts
Post by: Biggeorge on July 26, 2009, 10:02 PM

Cant wait to see it, I love 88 sports/masters!
Love owt like this me!

Title: Re: 88 haro master hubs/dropouts
Post by: graeme on July 28, 2009, 04:09 PM

it will be a while yet and not too impressive.

Im building it to ride so used parts that arent correct for the bike.

The frame has also lost its chrome rear end.

It will still be a nice bike but not worth getting excited about seeing :)