Author Topic: MRD built 4 MK10 just thought peeps might wanna know b4 MK11 its story (Read 44720 times)

58 delray · « **Reply #75 on:** May 15, 2010, 02:38 PM »

nice work

animal · « **Reply #76 on:** May 15, 2010, 05:28 PM »

I have a little bit of fettling 2 do but as good as sorted

I now need 2 flat off the whole frame and add a tiny bit more braize or p38 in a few places and also sort the holes on the forks. Then off 2 paint all being well

I have remolded the tubes using some formers I made, then drilled a very small hole on the rear of the dent area that I will seal back up when all done . Then I used a variely of punches I also made 2 work on the dents using half of the formers as a dolly on the back of the tubes. Pretty happy with how much of the dented area came out but needed 2 b mindful that the metal of the tubes has been stretched aswell when flattened out.

I then cleaned all the dented areas ready 2 lay some braize down 2 take up all the imperfections and dents left behind . Came up quite well really but condition of the corroded steel even when cleaned up hampered the process $:-\$

Then the hard slow process of hand filing etc 2 reshape the tubes . I am so so happy with the results considering what I started with

dordymush · « **Reply #77 on:** May 15, 2010, 05:40 PM »

turned out well in the end steve

Waxintaxin · « **Reply #78 on:** May 15, 2010, 06:05 PM »

Good work mate.
Love looking at this type of stuf

58 delray · « **Reply #79 on:** May 15, 2010, 06:12 PM »

great job steve

instead of using p38 have you ever tried lead filling? its what used to be used on cars before plastic fillers and in my opinion is is far superior as there is no shrinkage. a craftsman of your ability should have no problems with the method.
andy

bobafett · « **Reply #80 on:** May 16, 2010, 12:58 PM »

Wow great perseverance there Steve mate. I'm sure you'll hardly notice any of the repair work once it's all re-finished

Nice one

etriedes · « **Reply #81 on:** May 17, 2010, 09:11 PM »

Top job as usuall

markyp · « **Reply #82 on:** May 17, 2010, 09:30 PM »

kin ell steve,amazing work!!when you gonna sell me that frame too??

fischflo · « **Reply #83 on:** May 21, 2010, 08:53 PM »

Quote from: markyp on May 17, 2010, 09:30 PM

kin ell steve,amazing work!!when you gonna sell me that frame too??

won't leave after steve having saved it's life

jT Racing · « **Reply #84 on:** May 21, 2010, 10:05 PM »

spot on that.

animal · « **Reply #85 on:** July 25, 2010, 03:02 PM »

Its all over now thank F---

I'm a happy bunny now considering my tribulations

dordymush · « **Reply #86 on:** July 25, 2010, 03:24 PM »

come out mint our steve.
good ending for ya mucka

Jon The Bassist · « **Reply #87 on:** July 25, 2010, 04:04 PM »

Excellent! I remember a few of these on the tracks BiTD.
Jon

NORTY40 · « **Reply #88 on:** July 25, 2010, 04:18 PM »

Really pleased it has turned out well for you mate in the end

Looks great

Top resto work all round fella , impressive stuff

sid1972 · « **Reply #89 on:** July 25, 2010, 04:22 PM »

awesome fella!!! Real labour of love that..

markyp · « **Reply #90 on:** July 25, 2010, 04:24 PM »

lush steve,fingers crossed mine will be finished by the end of the week

In2 bmx · « **Reply #91 on:** July 25, 2010, 04:32 PM »

Top resto work.

Badbaldie · « **Reply #92 on:** July 25, 2010, 04:33 PM »

luverly resto job ,especially as there ended up lots more work than u originally started with.

now were do i get my hands on a mrd frame?

Macmania · « **Reply #93 on:** July 25, 2010, 05:27 PM »

Awesome resto job, well done

Glynnyboy · « **Reply #94 on:** July 25, 2010, 05:51 PM »

Fantastic work and a great thread. Can't wait to see it built up

rooski · « **Reply #95 on:** July 25, 2010, 09:09 PM »

fair play to you dude thats come out mint!
takes time,skill and patience to repair stuff like that

QUADROPHENIA · « **Reply #96 on:** July 25, 2010, 09:35 PM »

thats pukka, come out well mint, now you know how to repair it, can we run it over at MK

animal · « **Reply #97 on:** July 25, 2010, 09:59 PM »

Ur a cruel sod sometimes Pete

driven me mad and still is this build

monkian · « **Reply #98 on:** July 25, 2010, 10:04 PM »

Quality piece of work man

Credit to you for sticking with it. You've more than done it justice

trasher · « **Reply #99 on:** July 25, 2010, 10:40 PM »

top work again steve ,,,,,,, awesome job

Author Topic: MRD built 4 MK10 just thought peeps might wanna know b4 MK11 its story (Read 44720 times)

etriedes

sid1972

In2 bmx

monkian

trasher