Author Topic: Free Agent (Read 39556 times)

kdw712 · « **on:** April 05, 2006, 05:59 PM »

1991 Cruiser - Pro frame

kdw712 · « **Reply #1 on:** April 05, 2006, 06:01 PM »

1987 pro long - pre limo as no rear cross brace on rear chain stays

kcmobmx · « **Reply #2 on:** March 02, 2007, 04:24 AM »

and my rider:

kidoliv · « **Reply #3 on:** December 07, 2007, 09:41 PM »

My first build, free agent limo 1989, a dream...
F/A Limo Frame (kcmobmx)
F/A Limo forks (ebay uk)
GT expert bar (ebay us)
Odi mushroom stu thomsen (ebay us)
Tech 4 level chrome (radbmx)
Redline 401, 185 arms (ebay us)
Redline sprocket (23mag)
Dyno seat (23mag)
Arayas 7x chrome (23mag)
Knarler knobby tires (ebay us)
Nippon (23mag)
Crupi (ebay us)
DK xl stem chrome (ebay fr)
odyssey clamp (ebay us)
F/A pad set chrome (ebay us)

Dhillon · « **Reply #4 on:** May 05, 2008, 06:33 PM »

My Daily rider...

Free Agent Raceway.

nic968 · « **Reply #5 on:** May 15, 2008, 04:18 PM »

1988 Cruiser...Raced most recently at MK2007..Smooth riding 24"..

chris miller · « **Reply #6 on:** May 15, 2008, 09:19 PM »

free agent pro

[img]http://i207.photobucket

Lee Shurey · « **Reply #7 on:** July 20, 2008, 08:53 PM »

1990 Free Agent Limo

thecrooch · « **Reply #8 on:** March 04, 2009, 02:52 PM »

My 1989 Limo. Frame was bought NOS last year and has been raced for 2 seasons in the OSS.

nic968 · « **Reply #9 on:** June 29, 2009, 05:43 PM »

Jan 1988 Free Agent Pro 24

Jan 1988 Free Agent Pro 24 F&F
Araya 7x/suzue/comp 3
Odyssey Z Bars/DK Stem/Dirt Skirt/Oakley Grips
DK Seatclamp/FA post/Viscount Aero
DC 901 Brakeset
Tioga Maxi-Flo Cranks/Sugino spider & ring
My DX pedals form the 80's...Still going strong.

Bigfrawg · « **Reply #10 on:** July 02, 2009, 03:04 PM »

flying fortress

daz bmx it! · « **Reply #11 on:** November 15, 2009, 01:51 PM »

FREE AGENT PRO 24" CRUISER

skywaynz · « **Reply #12 on:** November 08, 2010, 09:44 AM »

The FA FreeAgent Speedway stamped serial number "FA22, U90823689". It has a brilliant red color with quality FA Freeagent parts on (Top end FA FreeAgent Racing BMX).

All original FA components:

- FA Freeagent 100% Chromoly Frame & Fork.

- FA Freeagent 4130 Chromoly handle bar.

- FA Freeagent logo grips.

- FA Freeagent red wall tyres (20" x 1.75).

- FA Freeagent alloy bar stem.

- FA Freeagent alloy brake caliper.

- Shimano Deore XT brake handle.

- FA Freeagent 180mm - 3 piece crank set (sealed bearing).

- FA Freeagent chainring.

- VP-565 pedals.

- ALEX alloy wheel rims.

- Tioga headset.

- FA Freeagent Kevlar leather seat.

- Eazy adjsustable alloy seat clamp.

- FA Freeagent wheel hubs (sealed bearing).

- KMC Chain.

katau · « **Reply #13 on:** January 28, 2011, 02:06 PM »

My Bike,It`s a Freeagent but i don`t know what model and year,if anybody knows to tell i will be verry happy.Thanks

Gish · « **Reply #14 on:** March 10, 2011, 02:28 PM »

1989 freeagent limo

stidds · « **Reply #15 on:** March 27, 2012, 09:25 PM »

2010 FreeAgent Team Limo 24

Darren KAP · « **Reply #16 on:** September 02, 2012, 08:10 PM »

1984 Free Agent Freeflight freestyler

hazzajoe · « **Reply #17 on:** April 19, 2013, 11:16 AM »

Freeagent Pro Long or Limo. 21"tt.
profile 175mm cranks
profile whippit 44t chain wheel
profile xl stem with homemade spacer
S&M race xlt bars new school
dxr brake lever, seventies slick cable, bulldog caliper, doesn't work :-( have some new pads to try.
araya aero with suntour sealed front.
araya aero with suzee sealed rear. shimano 16t free wheel.
comp 3 reissues
gt seat clamp
generic post
s&m seat

Rides nice apart from the brake. The aim was to get on the track to help make the numbers up at the first north region event to try to ensure we can keep the old school racing alive in the north and spread the love county wide.

stidds · « **Reply #18 on:** December 27, 2013, 10:32 AM »

Team Limo

Ba5h · « **Reply #19 on:** January 09, 2015, 06:02 PM »

Airstrike

CustardLips · « **Reply #20 on:** March 28, 2016, 09:08 PM »

Freeagent Limo 1990

Mikku · « **Reply #21 on:** May 15, 2016, 03:20 AM »

Largely through the ownership of a VDC-built Trident, I’ve become increasingly interested in Free Agents. I loved the story behind the name and idea (as explained further in the extract from Jay Stark’s interview with Voris Dixon below) and finally picked up this '84 version. It’s built around an ‘84 frameset (the 8-digit serial - on the non-drive side dropout - is 1284****), which I think makes it one of the early ones built by Brad Shoup in Beuna Park, California rather than VDC, as Voris Dixon was shutting up shop around that time. At first I thought the green was a spray-bomb job but both the paintwork and the era-correct decals are in the condition you’d expect after 30-odd years. The TT length is 19 1/8” and there is no chainstay brace. It was sourced from California along with the bars, which measure 27 ½” with a rise of 8 9/16”, so I think are original Free Agent Pros. With both the paintwork and decals showing their age, I went for a survivor look using old school parts wherever possible. Nothing fancy, just a simple build, along the lines of a budget-racer from the mid-80s. Check out the photos below, and here’s an extract from Jay Stark’s interview with Voris Dixon:-

JS: On the racing side, did you have any pros?

VD: You know Brent Shoup? He "supposedly" started Free Agent all by himself?

JS: Supposedly?

VD: He rode for me, and his mother Yvonne sold the Free Agent frames. Put it together.

JS: This I got to hear!

VD: I saw a pro that was in-between sponsors, and he had "Free Agent" on his jersey.

JS: You mean Greg Grubbs?

VD: Yes! That was him. I loved that. So I picked up on the name and went over to Yvonne and gave her $1000. I told her to open up a checking account. I told her, "I don't believe in advertising, so let's see if it works." "Here's the name of the company, "Free Agent". I will build all the bikes, and you run with it." So that is where Free Agent came from.

JS: Amazing!

VD: I still own half of it. But, I don't know who owns the other half. It has been sold at least once. I still have all the paper work that says I own half of it. And I have never been paid off…

Penny Dixon: So can we retire?

VD: Next time I get to California, I am going to ask Gary (Turner) to find out.

I have been to the Free Agent website. I read all this crap about how Brent Shoup started as a one man shop and had a better dream…all this stuff. I said, "You're full of shit! That was me!"
Yvonne, she was a heavy set woman. And Brad was her husband. He was then making the stuff in the garage. She lost 40 lbs., bought a Corvette and skipped town to Vegas. So he (Brad) ended up running the company. I think he is the one that ended up selling the company.

I still have some invoices that I billed to Free Agent. See, she never paid for anything. I gave her everything. I built all the frames and just gave her an invoice. When she sold frames, she took all that money and put it into advertising. I just wanted to find out if advertising worked. It cost a hell of a lot of money to advertise.

Thanks for looking!

Funkyworm · « **Reply #22 on:** December 22, 2016, 10:13 PM »

1986 Freeagent 24"

This frame & fork set was previously owned by Mike Miranda who raced this even though he was with the team 2 years later as he preferred the slightly bigger frame of the 86. It was purchased on Craig's list in the California directly from him & there's a thread about it on the museum here..

http://bmxmuseum.com/forums/viewtopic.php?pid=5395034

The purchaser put the frame on Ebay not long after & I managed to pick it up & had it imported in to the UK, its been my daily rider ever since

Chilli Rinse · « **Reply #23 on:** April 09, 2023, 06:54 PM »

2000 Free Agent Hellcat

Author Topic: Free Agent (Read 39556 times)

kcmobmx

kidoliv

Dhillon

nic968

chris miller

Lee Shurey

thecrooch

nic968

daz bmx it!

skywaynz

katau