Technical & Reference Section > Tech and Restoration

Stuck seat post

(1/2) > >>

skki3330:
HEEEELLLPPPPP
Just picked up a really nice Curtis Pro but it has a Uni Turbo seat and post and the bloody thing is stuck! any ideas? ive already chucked loads of wd40 at it and carfully tried to remove with mole grips but because of using a rag to protect the post i dont get much of a hold.

what can i do :idiot2:

mattfx81:
You could drill a hole as low as you can into the post to get a lever into it and twist it out. It just means the post will have to be dropped lower into the seat tube to hide the hole.

kev-s:
turn the frame upside down & stick it in a wood vice as low as u can get it and twist the frame back and forth

skki3330:
Matt good idea i would have done that but the post is so low any lower and i may aswell bolt the seat straight o the frame lololol.

Kev i must admit i have bought the frame into work with me today as i dont have a vice at home but the ood vice still scrapes the post, i currently have one of the lads in the workshop trying to fine me to nice pieces of rubber think i might get mo grip maybe.

brettypeeps:
You have got to keep sqirting with WD40 and hope it penetrates.  The last thing you want to do is twist the frame trying to get it out...  Patience is a virtue :daumenhoch:

You could try knocking the post in a bit.  a bit of shock treatment could get it moving 8)

Navigation

[0] Message Index

[#] Next page