Author Topic: CSBOTM September 2011 - Vote Results (Read 14687 times)

pickle · « **on:** September 12, 2011, 06:32 PM »

bang em up, four pictures and description if you want to

Julian347 · « **Reply #1 on:** September 12, 2011, 07:05 PM »

Here goes.

My very first build. Tried to keep it era correct with a sensible budget. Hope you like it.

Cheers

Julian

Skyway TA (84) frame and forks
GT PRO bars
Amé Round bubble font
Skyway Tuff II – alloy hub
Tioga Comp 3 (re-issue)
Suntour Power Stem
Beartrap 2 headset
SST dirt skirt
Tange SC2 seat clamp
Odyssey lay back (GT decal)
Kashimax Aero
Dia-compe 901, Tech 4 lever & DC cable
Sugino OPC
Sugino spider
Sugino chain ring 44t
Tange BB
Shimano SX pedals
Izumi chain
Cal lite pads (repop)
Dropout savers (Made by cuckoo)

Gish · « **Reply #2 on:** September 12, 2011, 07:38 PM »

1984 JMC SHADOW

jmc shadow f&f
gt pro bars
pro neck stem
oakley b2 grips
tioga beartrap II headset
uni pro seat/post combo
tange b/b
NOS tioga task force opc
NOS tuf neck powerdisc
NOS pro neck chainring 44t
sugino chainring bolts
suntour xc II pedals
ybn black/chrome chain
dc mx 900 caliper/ dc blocks
dc tech 3 lever
dc brake cable (85)
NOS black arayas 1.5's
NOS suzue hubs
comp III tyres
jmc padset

stevochb · « **Reply #3 on:** September 12, 2011, 07:49 PM »

Early 80s Ripper frame,
Stamped LGs
Ame cams
Champion expert bars
Pro Neck stem
Tange Seiki headset
Ayaya 7x rims on h/f Sunshine hubs
Kashimax aero seeat
Hutch bear traps not repops
Takagi Tourney cranks
DC 1020 calipers
DC pre bend levers
Yellow label comp 3s

Hope you like

bigfatolly · « **Reply #4 on:** September 13, 2011, 10:43 PM »

1984 Chrome Rickman freestyler

Exact replica of the bike i had BITD that was sadly stolen in 87.

Link to resto thread here http://www.radbmx.co.uk/forum/index.php'topic=132415.0

Some pics

brass monkey! · « **Reply #5 on:** September 15, 2011, 08:53 PM »

1993/4 SE FLOVAL FLYER CRUISER

Not one for the purists, but I chose the parts to complement the build. Mix of New School Retro, Mid School and Old School. Built as a 'rider' rather than the usual show pony fare... My first build for nearly 3 years

Frame: SE FLOVAL FLYER - 1993/4
Fork: PRE-FUJI SE LANDING GEAR
Wheels: SKYWAY GRAPHITE
Bars: JOHNNY CHOPPER
Stem: PROFILE
Crankset: PROFILE RETRO
Brakeset: SHIMANO DXR
Pedals: SKYWAY GRAPHITE
Headset: HOPE
Seat: ELINA LIGHTNING BOLT
Tyres: MITSUBISHI COMP 3
Padset: SE JJR RETRO 2007
Chain: IZUMI
Chainwheel: SUGINO
Grips: ODI 'STAY STRONG'

In2 bmx · « **Reply #6 on:** September 17, 2011, 01:24 AM »

   81 Robinson Expert F+F and Bars

   Nos Elina

   Nos Robinson stamped seat post

   Nos Dc twin bolt seat clamp

   Nos DC Mx 1000's with RH Lever

   Nos Skyway pro pads

   Nos Comp 3 tyres ( blue silver lable )

   Nos Izumi chain

   Nos Tange headlock

   Mint Oakley .5's

   Mint Suntour xc Compe pedals

   Mint Redline Flight 43 chain ring

   Mint Gen 1 Tuf neck

   Original finish Pro class rims Black Nipples

   Bulls eye hubs

More photo's here http://www.radbmx.co.uk/forum/index.php'topic=132025.0

Carl

hotdog · « **Reply #7 on:** September 18, 2011, 07:35 PM »

Just built this as a bit of a 'rider' project. A mix of nos & originali parts. It's not a minter by any stretch of the imagination but it does go like sh%t off a shovel !
'86 GT Cruiser frame & forks
Powerlite Cruiser bars
A'ME Cam grips
GT stem
Dia Compe 890 brake/straight lever
Araya 7X rims laced to Suntour/ACS hubs
GT seat clamp
Haro Fusion 170mm OPC
Sugino spider/chainring
Shimano SX pedals
KMC chain
Suntour freewheel

double chevron · « **Reply #8 on:** September 19, 2011, 01:10 PM »

For those who don't venture too much in the mid school section:

http://www.radbmx.co.uk/forum/index.php'topic=132627.0

BOSS Bad Boy XL 1993

BOSS Bad Boy XL 1993

F+F: BOSS 20.75" TT
Bars: BOSS
Stem: BOSS
Cranks: BOSS
Pedals: SR Speedtraps
Saddle: Italia Turbo "bio"
Whells: Mavic XX/ Suzue sealed
Tyres: Comp III
Brake: Dia Compe Bigdog et Tech 5
Seatpost: kinda Elf
Seatclamp: GT
Grips: Dyno

acceler8blue · « **Reply #9 on:** September 20, 2011, 08:10 PM »

My Skyway TA Serial No. 000003 build

Skyway Race Bars, Nora Pro Grips, Cal Lite Pads
MX1000 brakes, Shimano Hubs, Pro Class type chrome rims
Elina seat, Pro Neck seat post, Tange seat clamp
Tange LP125 headset, Pro Neck stem
Profile Box Cranks, MKS Pedals, Takagi spider,
Sugino chain ring, Izumi chain, Skyway Pro Pads

Daletsunami · « **Reply #10 on:** September 22, 2011, 11:43 AM »

Here's my entry 1983 GT Pro - Greg Hill Replica Build

Parts Rundown

GT Pro F&F
GT Pro Bars
Redline Brute Stem
Ame Grips
Tioga Headset
Pro Class Rims laced to Campagnolo Record Hubs
Fat and Thin Comp 3's
DC MX 900 Rear Calliper
Kool Stop Brakepads
DC Brake Lever
DC Brake Cable
KKT Lightnng Pedals with VDC Pedal Extenders
Profile Cranks with Profile Spider
PPP 43t Chainring
Suntour 16t Freewheel
Kashimax Seat
Tuf Neck Clamp
GT Post
Zap Pads
White Flo Panel

Discostu · « **Reply #11 on:** September 25, 2011, 03:32 PM »

here is my entry. my 1989 pk ripper hybrid rider. it has been to 4 ride outs now. i wanted to make a bike up using all my favorite bits from the 80's,90's,00's, and present day. thats why it has been labelled as the hybrid build. this may not be to everyones taste but i love it!

its a 1989 pk ripper. yes you have read that right 1989!!!!!

custom powder coating by superbike dan. sparkles like nothing else in the sunshine!

original nos se racing pk ripper decal set. in silver and grey.

modified bottom bracket/cranks with sealed cartridge bearings. the gt cranks have had the anodise removed and have been polished. chainring is a polished (on both sides) profile imperial 36 tooth

1" to 1"1/8th conversion to except 1"1/8th sinz carbon race forks. and yes i have drilled them to except a u brake mount. headset is a mixture of tioga beartrap 2 1" & savage 1"1/8th

both the u brake mounts were machined to fit the profile of the frame and the forks.

dk stem has been polished and a gyro plate was made up on a cnc machine. the gyro is an odyssey gtx that has had all its seals and bearings removed and the main part polished. bottom gyro plate was modified to fit the alloy ripper frame.

dx pedals have been restored with new caps.

kink park pegs have been polished.

u brakes are polished odyssey evo 11

seat post is a haro fusion cromoly. re decalled

seat is an odyssey senior 2

the wheels are peregrine super pro. with a nos shimano mx30 16 tooth freewheel.

chain tensioners are polished bullsye modified to match the shape of the dropout curve. with shorter adjusting bolts.

tyres are haro multisurface 3 white walls.

levers are dia compe dirty harry.

bars are hoffman ramproom lovehandles. with polished lugs for the removable bar ends.

grips are odi longnecks with custom made cnc bar ends.

chain is stolen half link. that was a complete pig to fit.

stainless or titanium bolts have been fitted through out

please enjoy stu

pickle · « **Reply #12 on:** September 28, 2011, 07:49 PM »

my new rider finished (sort of)

87 Street Beat MKIII with unstamped LG's
DK freestyle bars
Fusion stem
Beartrap II headset
Prolite stealth powerbite cranks
Fishbone hubs with Sun rims
Lamello tyres
Nippon front brake AD990 rear with Tech 5 levers

pickle · « **Reply #13 on:** October 04, 2011, 03:32 PM »

Pretty close running between 3 bikes this month guys, make your vote count

pickle · « **Reply #14 on:** October 05, 2011, 10:19 AM »

Looks like it's a two horse race now.........keep voting peeps

pickle · « **Reply #15 on:** October 06, 2011, 07:54 AM »

dead heat at the moment...........make your vote count guys

ED209 · « **Reply #16 on:** October 06, 2011, 01:25 PM »

Boss, JMC, Robbo or StreetBeat?

??

fook knows!

ED209 · « **Reply #17 on:** October 06, 2011, 01:26 PM »

whay has that Boss not got more votes? its beauty

motomagII · « **Reply #18 on:** October 06, 2011, 05:55 PM »

boss for sure

In2 bmx · « **Reply #19 on:** October 08, 2011, 09:00 AM »

Thanks for all your votes guys .

another close one .

A worthy winner that GT . Well done Dale

Let's see what's lying around the house for next month

Discostu · « **Reply #20 on:** October 08, 2011, 09:17 AM »

Well done Dale. That gt is tops! I'm well happy getting 8 votes. I must build up my next machine and have another go!

monkian · « **Reply #21 on:** October 08, 2011, 09:59 AM »

Great month again lads. Awesome top 3

bobafett · « **Reply #22 on:** October 08, 2011, 10:56 AM »

Quote from: monkian on October 08, 2011, 09:59 AM

Great month again lads. Awesome top 3

+1

Nice top 3 indeed - well done lads

Gish · « **Reply #23 on:** October 08, 2011, 12:55 PM »

nice one dale on winning fella

i'm over the moon with my second place and thanks to everyone who voted for my jmc

Julian347 · « **Reply #24 on:** October 08, 2011, 08:32 PM »

Congratulations Dale. A worthy winner and brilliant attention to detail.

Thanks to those who voted for my TA as well.

Julian

Author Topic: CSBOTM September 2011 - Vote Results (Read 14687 times)

In2 bmx

acceler8blue

Daletsunami

motomagII

In2 bmx

monkian