Technical & Reference Section > Tech and Restoration

Can I put pegs on front wheel, 2009 Freestyler

<< < (2/7) > >>

hunterdubber:
Do you want to use modern style pegs as opposed to the long old school trick nuts, as being mentioned above ?

Modern style pegs only require the axle sticking out about 6mm past the wheelnut .

Take the nut off,, ,peg on ,,,nut back on with a socket extension  :)


Or are you using threaded pegs  :-\

sparkysx:
I want to use the modern ones, but pretty sure the axle doesn't stick 6mm past the wheelnut, hence my problem

Betty:
Has it got tuffs on?

Just remove the existing washer from behind the wheel nut on the side you're fitting the pegs on, the pegs won't be much thicker than the washer you've removed...  :daumenhoch:

They'll work fine with tuffs, just don't go doing anything to heavy on em, those 10mm axles will bend easy

sparkysx:
Yeah it has tuffs on it, the washer behind the wheel nuts is one of those safety ones that locks the wheel onto the forks.

Betty:

--- Quote from: sparkysx on January 23, 2012, 10:15 PM ---Yeah it has tuffs on it, the washer behind the wheel nuts is one of those safety ones that locks the wheel onto the forks.

--- End quote ---

Chuck it away, unless you plan on riding with the wheel nuts loose you won't be needing it...  :daumenhoch:

Navigation

[0] Message Index

[#] Next page

[*] Previous page