Author Topic: What Are You Planning To Build In 2016? (Read 10620 times)

pickle · « **Reply #50 on:** December 31, 2015, 10:52 AM »

Quote from: stidds on December 31, 2015, 10:46 AM

Quote from: Jaymz on December 31, 2015, 10:41 AM
Fook all. I'm priced out of the hobby. I will have to sell one of my 4 to build again and I'm very much attached to them all.

I haven't built an 80's bike for a long time, but just built one and god damn the parts are expensive. However with a bit of searching and lateral thinking it hasn't ended up costing too much. Yes NOS MX1000 calipers are way too expensive to buy, but one that needed a bit of cleaning and restoration cost me £35, Kashimax Aero seats are crazy prices, but there are other seats to use for a lot less money.

Looking forward to seeing it built Sean, frame and forks look amazing

much prefer a build with a few different parts that have some thought put into them rather than the usual

NORTY40 · « **Reply #51 on:** December 31, 2015, 11:19 AM »

Quote from: Retrodan72 on December 29, 2015, 11:25 AM

Quote from: NORTY40 on December 28, 2015, 12:10 PM
Not sure if i'll build a bike but i might build a house ....... if i ever get planning permission

You could build a street before you get round to doing a bike again Joffster.

Not if that's street is under my Local Planning Area's control , im getting the impression you need planning permission to pitch a fookin tent round here

stidds · « **Reply #52 on:** December 31, 2015, 12:13 PM »

Quote from: pickle on December 31, 2015, 10:52 AM

Quote from: stidds on December 31, 2015, 10:46 AM
Quote from: Jaymz on December 31, 2015, 10:41 AM
Fook all. I'm priced out of the hobby. I will have to sell one of my 4 to build again and I'm very much attached to them all.

I haven't built an 80's bike for a long time, but just built one and god damn the parts are expensive. However with a bit of searching and lateral thinking it hasn't ended up costing too much. Yes NOS MX1000 calipers are way too expensive to buy, but one that needed a bit of cleaning and restoration cost me £35, Kashimax Aero seats are crazy prices, but there are other seats to use for a lot less money.

Looking forward to seeing it built Sean, frame and forks look amazing much prefer a build with a few different parts that have some thought put into them rather than the usual

I have finished the bike today Rob, will take some pictures of it in a short while (whilst the sun is still shining) and post it later.

pickle · « **Reply #53 on:** December 31, 2015, 12:33 PM »

Ohhhhhh looking forward to seeing those mate

factory pilot · « **Reply #54 on:** December 31, 2015, 01:10 PM »

It looking like

is very much alive and well despite reports of it's premature death!

Can't wait to see and have the previldge to vote for some of these build in next year's BOTM lads!

stidds · « **Reply #55 on:** December 31, 2015, 01:20 PM »

Quote from: factory pilot on December 31, 2015, 01:10 PM

It looking like is very much alive and well despite reports of it's premature death!
Can't wait to see and have the previldge to vote for some of these build in next year's BOTM lads!

I have heard that one for the last 12 years, every year it is 'oldschool is dead', 'nobody builds anything any longer', 'there is nothing left to build, it has all been done', 'radbmx is dead', 'forums are dead, social media is the way forward'. But every year new people join the sport/hobby, more bikes and built and new previously unseen bikes are unearthed.

Ady · « **Reply #56 on:** December 31, 2015, 03:43 PM »

Nearly finshed a nos ultra burner in black and gold my first Bmx back in '82..
Just waiting for levers gold levers and 131 pedals bought from here then done..
Just need the circler reflector got the bracket just the reflector anyone..

Ste · « **Reply #57 on:** December 31, 2015, 03:56 PM »

Starting to get bits together for a TNT c4 mid racer

pickle · « **Reply #58 on:** December 31, 2015, 04:28 PM »

Liking the look of that TNT Ste

BUBBS · « **Reply #59 on:** December 31, 2015, 04:49 PM »

Not going to build anything but I am going to carry on collecting, Old School Vans, race pants, race shirts ect

Gish · « **Reply #60 on:** December 31, 2015, 04:54 PM »

Quote from: Ste on December 31, 2015, 03:56 PM

Starting to get bits together for a TNT c4 mid racer

Gotta love a TNT

CustardLips · « **Reply #61 on:** December 31, 2015, 05:03 PM »

Quote from: Gish on December 31, 2015, 04:54 PM

Quote from: Ste on December 31, 2015, 03:56 PM
Starting to get bits together for a TNT c4 mid racer

Gotta love a TNT

Thinking of shifting mine. $:-\$

Gish · « **Reply #62 on:** December 31, 2015, 05:34 PM »

Quote from: CustardLips on December 31, 2015, 05:03 PM

Quote from: Gish on December 31, 2015, 04:54 PM
Quote from: Ste on December 31, 2015, 03:56 PM
Starting to get bits together for a TNT c4 mid racer

Gotta love a TNT

Thinking of shifting mine. $:-\$

You will regret it Nick, best mid school race bike out there

CustardLips · « **Reply #63 on:** December 31, 2015, 05:40 PM »

Quote from: Gish on December 31, 2015, 05:34 PM

Quote from: CustardLips on December 31, 2015, 05:03 PM
Quote from: Gish on December 31, 2015, 04:54 PM
Quote from: Ste on December 31, 2015, 03:56 PM
Starting to get bits together for a TNT c4 mid racer

Gotta love a TNT

Thinking of shifting mine. $:-\$

You will regret it Nick, best mid school race bike out there

Yeah I know but it's a 22" beast... some big fooker needs to buy it off me.

denzil · « **Reply #64 on:** December 31, 2015, 07:23 PM »

Nothing I'm skint.

Ste · « **Reply #65 on:** January 01, 2016, 05:20 PM »

As much as I don't want to I'm gonna strip the red paint and go with TNT/s&m yellow.
Which TNT do you have Mr custard?

CustardLips · « **Reply #66 on:** January 01, 2016, 05:26 PM »

Quote from: Ste on January 01, 2016, 05:20 PM

As much as I don't want to I'm gonna strip the red paint and go with TNT/s&m yellow.
Which TNT do you have Mr custard?

A Longfellow 22" tt prototype.

That Swan Guy · « **Reply #67 on:** January 01, 2016, 05:29 PM »

Longfellow 22"

Are you sure this is a bike?

CustardLips · « **Reply #68 on:** January 01, 2016, 05:33 PM »

Quote from: That Swan Guy on January 01, 2016, 05:29 PM

Longfellow 22"

Are you sure this is a bike?

Never said it was a bike... it's a canoe with wheels.

Ste · « **Reply #69 on:** January 01, 2016, 05:43 PM »

Sounds nice,you got any pics of it? I've been after some 1 1/8th TNT forks a for years,never see them.

CustardLips · « **Reply #70 on:** January 01, 2016, 05:46 PM »

It's 1" threaded Ste and if it's going it's going as a package with a few other TNT bits.

I can send you some pics if you like mate.

Ste · « **Reply #71 on:** January 01, 2016, 05:52 PM »

Yes please do mate

rodriguez · « **Reply #72 on:** January 01, 2016, 07:59 PM »

I want to build everything I've got, one nearly finished and the rest are work in progress.

Peugeot 501
S&M Bennett
GT Pro
WTP Osato
Tuff Burner

midschooljon · « **Reply #73 on:** January 01, 2016, 08:14 PM »

Quote from: Ste on January 01, 2016, 05:20 PM

As much as I don't want to I'm gonna strip the red paint and go with TNT/s&m yellow.
Which TNT do you have Mr custard?

you will live to regret this.

GaryMcB · « **Reply #74 on:** January 01, 2016, 08:22 PM »

Got a dyno comp in bits at the moment, going to be powder coated and rebuilt ready for the chester ride

Author Topic: What Are You Planning To Build In 2016? (Read 10620 times)

rodriguez