Technical & Reference Section > Tech and Restoration

Twin rear wheel sprockets...

<< < (2/5) > >>

FuNMoNsTeR:
Thanks guys.... but that sprocket wont work  :(

My mad mate Warren saw my pics of the Clemtwin system and insists he wants to build a Clemtwin esc setup. Possibly to go on his Crazy Goose. Crank arms are not a problem.
  I just figured the problem with a flip flop hub.... As you pedal it would undo one of the sprockets so some rethreading would be in order??
 

FuNMoNsTeR:

--- Quote from: kdw712 on January 15, 2008, 08:43 PM ---think this is it

http://www.danscomp.com/426019.php?cat=PARTS

--- End quote ---

Cheers m8....That would work.... 14mm axle though  :(

HEYWOOD BMX:
 :) Haro used to do  a LSD/RHD flip flop 14mm hub.I had one,got it from Shitestanleys.....

MartyC:

--- Quote from: FuNMoNsTeR on January 15, 2008, 09:05 PM ---
--- Quote from: kdw712 on January 15, 2008, 08:43 PM ---think this is it

http://www.danscomp.com/426019.php?cat=PARTS

--- End quote ---

Cheers m8....That would work.... 14mm axle though  :(

--- End quote ---

Just a thought but it has sealed bearings so you could see if you could get bearings with a smaller inside diameter to replace the stock ones or get shims made up to reduce the axle down to 3/8" or 10mm and put a different axle in  :daumenhoch:

FuNMoNsTeR:

--- Quote from: MartyC on January 15, 2008, 09:24 PM ---
--- Quote from: FuNMoNsTeR on January 15, 2008, 09:05 PM ---
--- Quote from: kdw712 on January 15, 2008, 08:43 PM ---think this is it

http://www.danscomp.com/426019.php?cat=PARTS

--- End quote ---

Cheers m8....That would work.... 14mm axle though  :(

--- End quote ---

Just a thought but it has sealed bearings so you could see if you could get bearings with a smaller inside diameter to replace the stock ones or get shims made up to reduce the axle down to 3/8" or 10mm and put a different axle in  :daumenhoch:

--- End quote ---

I wondered that too..... thanks m8.  :daumenhoch:

Navigation

[0] Message Index

[#] Next page

[*] Previous page