Technical & Reference Section > Tech and Restoration

Newby crank help

<< < (3/5) > >>

stidds:

--- Quote from: bai13y on April 10, 2008, 03:17 PM ---
Should probably itroduce myself properly somewhere,


--- End quote ---

Get over to the Welcome section at the top of the forum, introduce yourself and get the virtual beers in.

perry:
cool

i thought about doing automotive but as im sure you know its a very saturated area , all the kids want to build race cars  ;D

and as i prefer a more traditional aproach vvvvv its an area thats getting outdated  :(

with a bit of luck i hope to do a maufacturing engineering btec in sept  :)

bai13y:
sounds good,
Ye i know what you mean, my year is split into F1 nuts, familey hatchback designers, modifiers-not chav boy racers-but wanna do performance stuff) and people that really dont care and just want a degree.

I'm one of those modifiers, i wanna go into say track car building or BTCC and GT cars.
Where you gonna be studying?


Another Bike Q,
What type of Brake cables when using a gyro?
and how do you fit them when the brake at the back is like this...

(bike no longer looks like this....but this is how i got it)


cheers

perry:
itl only be a year course and luckily its only 5 mins away

although i can only do it if i manage to get a job to get some pennys before sept

normal gyro cables will be fine for that

http://www.alansbmx.com/product_info.php?cPath=32_55&products_id=3013

http://www.alansbmx.com/product_info.php?cPath=32_55&products_id=3014

looks like you have a hole in your seattube ? put a threaded adjuster in and run the cable through it

then a brake bridge , doesnt have to be as fancy as this  ;D

http://www.alansbmx.com/product_info.php?cPath=32_55&products_id=4240

then a stradle wire for the actual u brake  :)

do you realllly need a gyro ?

dj_benice:

--- Quote from: bai13y on April 10, 2008, 03:57 PM ---sounds good,
Ye i know what you mean, my year is split into F1 nuts, familey hatchback designers, modifiers-not chav boy racers-but wanna do performance stuff) and people that really dont care and just want a degree.

I'm one of those modifiers, i wanna go into say track car building or BTCC and GT cars.
Where you gonna be studying?


Another Bike Q,
What type of Brake cables when using a gyro?
and how do you fit them when the brake at the back is like this...

(bike no longer looks like this....but this is how i got it)


cheers


--- End quote ---

Speak to keep it lit, you wanna see the jaws hit the deck when impatient m3 drivers flash him to move over and then when he does and guns it they get destroyed by a corrado  :LolLolLolLol:

Navigation

[0] Message Index

[#] Next page

[*] Previous page