Author Topic: What's the difference... (Read 564 times)

BrianP · « **on:** September 29, 2008, 10:57 AM »

...between Dia-Compe 890's and Dia-Compe 1020's???

Brian

Bigfrawg · « **Reply #1 on:** September 29, 2008, 11:00 AM »

about 130

BrianP · « **Reply #2 on:** September 29, 2008, 11:01 AM »

wish you meant £££'s!

Del · « **Reply #3 on:** September 29, 2008, 11:05 AM »

its the length of reach thats different

motomagII · « **Reply #4 on:** September 29, 2008, 11:12 AM »

pretty sure its the rech 890 are 89mm rEACH.1020S ARE 102MM REACH

BrianP · « **Reply #5 on:** September 29, 2008, 11:14 AM »

Cool, will check these tonight.
I'm guessing you measure them in kinda their "natural" position?

kdw712 · « **Reply #6 on:** September 29, 2008, 11:45 AM »

as greg says its the reach or length of the arms

so prob mounting spindle center to center of the lowest position the pad can sit in

1020's are longer arms basically

Frosty · « **Reply #7 on:** September 29, 2008, 03:15 PM »

the unexpected bonus is of course that you also now know the difference between MX900's and MX1000's!

BrianP · « **Reply #8 on:** September 29, 2008, 04:13 PM »

lol, yeah i discovered that difference thanks to the guys on here a while ago too.

only other thing i wish i knew a while ago (read: in the mid 80's!) was that i really shouldn't have used wet n dry to remove the gold anodising from a set of MX1000's.....

Bp

Author Topic: What's the difference... (Read 564 times)

BrianP

What's the difference...

Bigfrawg

Re: What's the difference...

BrianP

Re: What's the difference...

Del

Re: What's the difference...

motomagII

Re: What's the difference...

BrianP

Re: What's the difference...

kdw712

Re: What's the difference...

Frosty

Re: What's the difference...

BrianP

Re: What's the difference...