Author Topic: Who needs an expensive spray room (Read 2057 times)

adeshere · « **on:** January 21, 2006, 02:37 AM »

Just painting my shimano DX pedals after restoring them. This is my expensive paint room ... i.e. a box

[attachment deleted by admin]

adeshere · « **Reply #1 on:** January 21, 2006, 02:38 AM »

And then blue, just needs lacur now

[attachment deleted by admin]

danny silverstreak · « **Reply #2 on:** January 21, 2006, 07:04 AM »

quality

mivvi · « **Reply #3 on:** January 21, 2006, 08:53 AM »

Its like an 'Old school BMX' pantomime! He's behind you.............Oh no he's not, hee, hee.

Good work fella!

dordymush · « **Reply #4 on:** January 21, 2006, 02:26 PM »

good idea.
get the piccys a bit bigger.

gmac · « **Reply #5 on:** January 21, 2006, 02:37 PM »

Click on 'em Dave

dordymush · « **Reply #6 on:** January 22, 2006, 12:45 AM »

oh

.

jT Racing · « **Reply #7 on:** January 22, 2006, 03:00 PM »

turner prize goes to adeshere for box booth box

Flaz · « **Reply #8 on:** January 23, 2006, 04:50 PM »

Quote from: mivvi on January 21, 2006, 08:53 AM

Its like an 'Old school BMX' pantomime! He's behind you.............Oh no he's not, hee, hee.

Good work fella!

neallly shited me self laughing then

Peanut · « **Reply #9 on:** January 25, 2006, 05:34 PM »

you could always do what I do, paint em in the kitchen then spend 3 hours panicking while you try and get rid of the smell before the wife gets back from work, then exclaim that even though you did it in the garden in the dark and freezing cold the smell always seems to waft everywhere.

Above all else look innocent at all times.

Just hoping she hasn't noticed her good kitchen knife that I used to strip the paint off me forks.

kusam · « **Reply #10 on:** January 25, 2006, 11:03 PM »

adeshere · « **Reply #11 on:** February 02, 2006, 09:42 PM »

Well the pantomime is now over.

originally red with the paint removed, they transformed into nice smooth blue ones. Now i can finally finish building my first bike

[attachment deleted by admin]

dordymush · « **Reply #12 on:** February 02, 2006, 11:19 PM »

they came out mint.
mine are a bit chewed up at the ends. was thinking of powdercoating them.
what was these like.

Peanut · « **Reply #13 on:** February 03, 2006, 09:36 AM »

wow, they look great, nice job there.

adeshere · « **Reply #14 on:** February 03, 2006, 10:16 AM »

Had to take a file and the wet&dry to them, especially the ends

Gave them 2 coats of white, and about 4 of the blue and then finally 1 coat of lacquer

they arn't quite the correct colour blue but will do

mivvi · « **Reply #15 on:** February 03, 2006, 12:29 PM »

adeshere, did you use rattle cans or a proper spray gun? Also, did you have to cut back any layers or t-cut etc. Whenever I spray items, they come out quite good but the slightest knock and the paint is off. Never seems to have a hard surface to the paint when I do it? They have come out mint mate, good work fella.

adeshere · « **Reply #16 on:** February 06, 2006, 03:37 PM »

I first took a file and wet'n'dry to the pedals to smooth the edges out and re-shape them a bit. I then cleaned them up. I then left them in the house before i sprayed them to let them warm up a bit as in the shed they get so cold.

I then hung them up and sprayed tehm first white. Got to make sure you dont put too much on at once uotherwise you get theose annoying drips !.

I gave them two coats of white and then about 4 coats of blue before a final coat of clear lacure

adeshere · « **Reply #17 on:** February 07, 2006, 12:30 AM »

I used good old spray cans

This is what they allowed me to create

mivvi · « **Reply #18 on:** February 07, 2006, 11:24 AM »

Top job on the pedals and the bike mate. Thanks for the info on the painting. Its nice to know you can get a finish like that with just cans! Im off to find my DXs then!

adeshere · « **Reply #19 on:** February 08, 2006, 12:22 PM »

Using my spray room !!! meant there was no wind blowing the paint everywhere so i had more control on where it was going.

I closed the box (technical stuff this) when i finished to stop general dust and grime getting onto the paint before it dried

theRuler · « **Reply #20 on:** February 08, 2006, 04:09 PM »

Quote from: mivvi on February 03, 2006, 12:29 PM

adeshere, did you use rattle cans or a proper spray gun? Also, did you have to cut back any layers or t-cut etc. Whenever I spray items, they come out quite good but the slightest knock and the paint is off. Never seems to have a hard surface to the paint when I do it? They have come out mint mate, good work fella.

heat is the key

get the paint warm
leave the rattle cans on a radiator for an hour before using

also make sure the thing you are painting is warm too - airing cupboard job

if you can get the painted item back in the airing cupboard after, all the better. leave it a few days to harden (a week is best if possible)

or make a cardboard box that backs onto a radiator, sealing the heat onto the item (after painting)

Holmetech · « **Reply #21 on:** February 08, 2006, 09:52 PM »

Put your spray cans in a pan of boiling water and leave for 10mins.Warm the item that your spraying with a hairdryer while your waiting for the cans to warm up.Give the item 3 or 4 coats using hairdryer inbetween coats and for a few mins after you've finished spraying.If you get any bits in the paint,you can de-nib it with 2000's wet or dry then polish by hand with a cutting compound.Job done.

theRuler · « **Reply #22 on:** February 08, 2006, 11:14 PM »

a kettle of boiled water is good way to heat your rattlers too

heat is good . . .

mivvi · « **Reply #23 on:** February 09, 2006, 08:12 AM »

So its better to spray items in the summer really, unless I do them in the lounge!

I think I will have a go at the radiator box idea, I didn't know that leaving the item for a few days/a week hardens it even more, cool. Like I said, im not bad at spraying and usually get a great finish but find I can easily dig my nail into the paint once it has been drying for a few days. Thanks for the info lads!

adeshere · « **Reply #24 on:** February 09, 2006, 10:22 AM »

You right, you not supposed to spray when its cold as it wont harden properly. I had my fan heater on whilst spraying to keep it warm.

Not tried warming the spray cans thou, but i did leave tehm indoors to make sure they were as toasty as my house

Author Topic: Who needs an expensive spray room (Read 2057 times)

adeshere

adeshere

gmac

Flaz

adeshere

adeshere

adeshere

adeshere

adeshere

theRuler

Holmetech

theRuler

adeshere