Technical & Reference Section > Tech and Restoration

Problems fitting Gyro 2 - Help...!

<< < (3/5) > >>

wildon:
Do all the headset parts fit the forks without any of the gyro parts?  Adding the gyro bits should only take a small percentage of the threads.  Did you fit parts 5 and 9 FULLY in to the frame headtube when you tried before?

g_lamb:

--- Quote from: wildon on May 20, 2009, 06:30 PM ---Do all the headset parts fit the forks without any of the gyro parts?  Adding the gyro bits should only take a small percentage of the threads.  Did you fit parts 5 and 9 FULLY in to the frame headtube when you tried before?

--- End quote ---

Yes m8. All headset parts fit ok without any Gyro parts and cups were correctly fitted  :daumenhoch:

wildon:
Ok well when it's fitted without the gyro how much thread is left before fitting part 1?  The 2 fixed gyro parts should take only 3-4mm combined of the length of the thread so if you have more than that left before fitting gyro and part 1 then you must be fitting it wrong  ???

wildon:
You know you have part 8 in your pic upside down right?

fugazi:
Are you using the longer torker forks with your longer headtube & whereabouts in MK are you?

Navigation

[0] Message Index

[#] Next page

[*] Previous page