Author Topic: BOTM Nov 2008 - Entries (Read 18033 times)

pickle · « **on:** November 01, 2008, 03:49 PM »

i know it's only the 1st but when you've completed you OS and Midd builds post em here

russ j · « **Reply #1 on:** November 02, 2008, 09:32 AM »

Here's my Factory spec Ultra Burner.Not to everyone's taste on here i know but here she is:

how the bike looked originally:

after a few nips & tooks:

and the finished bike

the 'Thanks' list:

Bendycat Eleventeen...The original bike
CCA...Adonising
Niamh999...Wheel re-builds
Beard...Sugino 1 piece crank
Julian Taff...NOS Sugino chainring bolts
DH Holmes services...powdercoat
Fhmreader...superchrome on the bars
Amf Sparten...the re-chroming of the bars
Oldboyburner...Aeroyal side decals
Jonny Abbott...decals
Esemdesign...pad set
Coloured tuffs...Tyres
Alans Bmx...Spokes
JT Smooth (Rad member)...Suntour seat clamp
RetrospectBMX...Seat post
Ebay...Custom M pedals
Ebay...Gold Z chain
Ebay...Brake cables
Ebay...Richbrook spinning dust caps

I restored the Aeroyal myself and was the original one that came with the bike.I used one of my own rear decals for the seat as well.

Russ......

QUADROPHENIA · « **Reply #2 on:** November 02, 2008, 05:32 PM »

something different that the white haros or GT's

Sparky24 · « **Reply #3 on:** November 02, 2008, 11:25 PM »

here we go

hello to anyone who reads this. this is me first old school build, and it,s me raleigh aero pro. i wanted my pro to stand out from any other so had it painted fire engine red{thanx buttsbikeshop} here are some pics and the parts i dressed her up in:
tange alley f+f
tange 125lp head set
redline 401,s hadley bb
shimano dx seat post
shimano dx pedals
shimano dx free wheel
dia comp mx1000 / tec 2 lever
dia comp twin bolt seat post clamp
kashimax mx seat
ame tri grips
suntour power stem
acs z rims on suntour sealed hubs
comp3 tyres green/blue logo
aero gld/wht/blk number plate
dice "R" logo valve caps
redline chain wheel

hope you like, seat post clamp , power stem, pedals,chain wheel,sprayed matt black

willchurton · « **Reply #4 on:** November 06, 2008, 11:26 AM »

Can't afford a pool backdrop so the side of the fence will do http://

cheers to markyj for the f&f & bettyswallocks for the cranks & numerous ebayers & radsters for bits & pieces http://

built as near to how i had it in 82/83ish (exept for dx pedals and a taskforce 1piece) i got a ripper frame only from alans xmas 82 and crossed all me bits of my torker prox, in those days you built them up with what you could afford and what was available and raced the backside off them, cheers

renthal bars, baby blue ame grips, flite donuts, helix type stem, tioga headset, sst dirtskirt, chrome araya 1.5s with blue suntour sealed hubs, cheng shin comp 3s, tufneck type spider and seatclamp, twin pinch flights, 44t ppp chainring, generic blue chain, solid ally post, kashi type seat, mx1000 brakeset, baby blue skyway pads, 16t shimano freewheel, vp beartraps, blue dustcaps & mirage plate

moley · « **Reply #5 on:** November 07, 2008, 06:04 PM »

Auburn XL (1995)

Auburn XL (1995) Race Specification

Frame	Auburn XL (20.5 TT)	Cro-Moly Front (Chrome) & Aluminium Rear (Yellow)
Forks	Auburn	NOS off SE-BMXER
Bars	Auburn	Off Noespickben
Stem	GT	Either Off MADD DOGG or OrgasmDonor
Headset	GT Pro Series	Silver
Grips	AME	Yellow
Cranks	GT Profiles 175's	Titanium Spindle and Bolts + Hop up Kit
Chainwheel	GT 44t	Off Orgasmdonor
Freewheel	ACS	16t
Pedals	Gusset Slim Jim	Yellow
Wheels	Araya RB17 1.5	Silver
Tyres	Schwalbe	Mow Joes (R1.85 & F2.00)
Brakes	Odyssey Pitbull	Silver
Brake Cable	Slick Cable	Pale Yellow
Brake Lever	Odyssey Monolever	Yellow
Seat/Seatpost Combo	Cougar 300	Yellow
Seat Clamp	GT Double Bolt	Chrome
Padset	Repro by Firebird	Yellow
Plate	Haro Tech (Insert only)	Yellow
Weight	Complete Bike + Pads + Plate	24.7 lbs

This is my 1st build in the bike of the Month Competition. I did build it at the end of October, so I dont know whether its eligible..................but I had to enter it due to the high numbers of Burners in this months competition!!!

bmxbob · « **Reply #6 on:** November 07, 2008, 06:40 PM »

BMX products inc. Mongoose Blue Max - 1983

its very far from NOS its not all singing all dancing but its mine and i like it.

Bob

Sparky24 · « **Reply #7 on:** November 07, 2008, 09:26 PM »

for sweetbeats

my crappy aero pro with a black/wht plate

the build of the tange alley (which mine is) is very nice

thebigdog · « **Reply #8 on:** November 08, 2008, 12:58 PM »

#########BIT OF MID-SCHOOL##########
1990/91 Bully Piston Survivor
This is how i got it I have gave it a spit and polish and it came up

The only thing I had to change was the tyres as they were rotten...it now has peregrine HP48 tyres.
parts run down -
Bully piston f&f no dents or damage,drop outs are mint,origianl decals to.
G.T bars
G.T stem
Ame tri grips
Odyssey rx-5 brake lever
Acs bos rear caliper
G.T viscount seat
G.T double pinch seat clamp
G.T platform pedals
G.T Wings power disc
izumi black & silver chain
Tange B.B set & Tange H/set
Pergrine 48 Pro Wheelset with un-sealed peregrine hubs & shimano mx30 freewheel.

I took it for a spin last night and its real smooth bike to ride

MaD-RoK · « **Reply #9 on:** November 09, 2008, 06:22 PM »

RALEIGH AERO PRO BLACK/CHROME CUSTOM

Been a lot of sweat blood and tears over this one.
MANY THANKS to everyone involved. You know who you are and I can't thank you enough for your help and support.

Hope you all like my build.

Run down of parts:
Custon AP chrome/black f/f cheers JONO!!!
Raleigh kashi aero seat
mx1000 black half stripped and polished
DC tech 2's half stripped and polished
Suntour black powerstem half stripped and polished
shimano dx pedals
powerdisc polished
sugino black 44 machined tooth
redline twin pinch cranks with custom decals
izumi black/silver chain. (missing two links) :oops:
pro class rims built on shimano dx hubs
tioga comp 3 tyres with innertubes and air
tioga V bars
ame tri grips
suntour silver clamp
chromed tange 300 headset
CUSTOM decals by DEL

Here was the sneak peak.

And heres how it is.

Spen69 · « **Reply #10 on:** November 10, 2008, 06:09 PM »

Madrock, that black Aero Pro is stunning. It's going to take some beating, but I like a challenge

Can I enter my Pro-Class? I only built it last friday, but it's on a post elsewhere here already......

1983 survivor f&f&bars re-finished by Mark FHMreader (looks great but survivor chrome underneath!)
1983 suvivor wheels and rim-strips with new Cheing-Shin tyres
New Flights & MKS pedals (don't care about the era, my bikes are all riders built how I want them)
Everything else bought off here and cleaned / restored ready to race, including the MX1000's bought in 4 halves!
New padset

Spen

JMCGT · « **Reply #11 on:** November 22, 2008, 10:17 AM »

Heres my COOK finally finished and a big thanks to Claude for the stickers and rims..cheers mate
cook frame and forks #422
1st gen cook bars
tiger stamped pro neck
cw seatpost with kashi seat
cook helix clamp
white polished bullseye hubs on araya rims
comp 3 tyres
cook cranks with KKT pedals
Tange grips..
cheers Matt

ron burgundy · « **Reply #12 on:** November 22, 2008, 01:39 PM »

PL20...

eamonn · « **Reply #13 on:** November 22, 2008, 06:32 PM »

Curtis Freestyle

holwuff · « **Reply #14 on:** November 23, 2008, 05:57 PM »

My street beat!

THIRSTYKIRSTY · « **Reply #15 on:** November 23, 2008, 09:23 PM »

A PILE O SHITE

ITS A POWERLITE

pickle · « **Reply #16 on:** November 25, 2008, 11:38 AM »

Sorry guys, i had a tidy up of all the comments and just kept the bikes......can we please keep it to just the bikes as it makes it much easier for us to sort them out when we set up the voting

many thanks

Rob

Ive got a burner · « **Reply #17 on:** November 26, 2008, 08:07 PM »

My 1st entry so i'll give it a shot with this.

My 1990 Robinson Pro

magna13 · « **Reply #18 on:** November 26, 2008, 09:29 PM »

Very nice Daz

Sparky24 · « **Reply #19 on:** November 26, 2008, 10:34 PM »

i thought twin pinch redlines were modern not old school

i see some on afew bikes on this month

am i being unsportsman like

MaD-RoK · « **Reply #20 on:** November 27, 2008, 12:09 AM »

Quote from: Sparky24 on November 26, 2008, 10:34 PM

i thought twin pinch redlines were modern not old school i see some on afew bikes on this month am i being unsportsman like

I don't remember firemen responding on Aero Pro's either.

eamonn · « **Reply #21 on:** November 27, 2008, 01:57 PM »

Nice bike Daz

Who needs a swimming pool in the back ground when you can pop down to the local sewerage works

condor96 · « **Reply #22 on:** November 28, 2008, 06:07 AM »

havent done this so guess ill give it a go around lol.

heres my late 97 hoffman condor. drove a few hundred miles to pick it up from the original owner.brought her home and spent awhile polishing it. i got real lucky and had an nos sticker set for it already. found some nos hoffman pegs,got some nos haro multisuface 3 whitewalls, found the seat on ebay and put an profile sprocket on. this build came together real easy for me for some strange reason,got lucky more than anything. if i didnt have the decals i would have been completly screwed. currently waiting on some sweet sparkly blue schwinn grips thatll look killer on it to change out the ones on it.

how it look when it first arrived after a long midevil polish

and after.............

Dingobmxer · « **Reply #23 on:** November 28, 2008, 07:10 PM »

Finished this this week,

1999 US made SE Quadangle, built as my winter rider/racer but it turned out to be a bit of a mid school beauty

DINGO

neiljonarcus · « **Reply #24 on:** November 29, 2008, 11:32 AM »

hear is my 87 green and white fst .. massive help off my mate

del

Author Topic: BOTM Nov 2008 - Entries (Read 18033 times)

russ j

Sparky24

willchurton

moley

bmxbob

Sparky24

JMCGT

eamonn

THIRSTYKIRSTY

Ive got a burner

magna13

Sparky24

eamonn

condor96

neiljonarcus