Technical & Reference Section > Tech and Restoration

removing the large nut on a tuf neck

(1/2) > >>

trasher:
is it possible ,to remove the large nut and shaft on a tuf neck stem ,,,had the spanner on it ,but didn't want to force it to much

need to remove it or them so i can get it annodised ,,,cheers chaps  :daumenhoch:

brass monkey!:
yeah they do come off dude ! just be gentle with it.......... ;)

kuwahero:
yes you can mate, not hard to do.

I undid the bolt on mine. unscrewed the bolt about three or four threads and hit with rubber mallet. repeated until the shaft came out the head of the stem.

got it reanno'd and then used the bolt to pull the shaft back in just by tightening it. held the shaft in a vice so I could ensure the head was straight and use both hands on the ring spanner.

trasher:
cheers chaps ,,,,, :daumenhoch:  off to the garage i go  ;)

moanjam:
do some pics glen  ;)

Navigation

[0] Message Index

[#] Next page